MAINTAINING THE SHOULDER OF RUNWAY, PTT AND LINKS ETC AND CUTTING OF GRASS BY MECHANICAL OPERATED SLASHER, CLEANING OF DRAIN AND DRAIN REPAIR, PAINT FOR MARKING IN HANGER AREA/ SUNSCREEN SHELTER AREA

Amount

Labour and T&P for cutting of grass by mechanically operated slasher where ever required including removing of material obtained from cutting and cleaning (both side) upto 1000 mtrs from the concrete edges complete all as specified and directed. Note:- (a) Contractor will arrange at his own mechanical slasher(set of min two tractor & Jungle Jeem) with POL & MT driver. The mechnical slasher will be operation from 09:30 hrs to 17:30 hrs, including lunch break of half hour at mid day, every day minimum out put of one mechnical slasher will be 4000 Sqm (Grass cut clear area) in a day, If the contractor will not arrange his own mechanical slasher(set of min two tractor & Jungle Jeem) with POL & MT driver, then double the rate recovery will be levied on the unit quoted rate. (b) The closure / non-operation will be communicated by Engg-in-Charge duly recommended by user. Separate register to be maintained.

Labour & T&P for cutting of grass by bush cutter operated slasher where ever required including removing of material obtained from cutting & cleaning (both side) upto 10 mtrs from the concrete edges complete all as directed. Note : (a) Contractor will arrange at his own bush cutter min 02 Nos per day with POL & operater . The bush cutter will be operation from 09:30 hrs to 17:30 hrs , including lunch break of half hour at mid day , every day minimum out put of one bush cutter will be 250 Sqm ( Grass cut clear area) in a day.If the contractor will not arrange hisown bush cutter min 02 Nos per day with POL & operater, then double the rate recovery will be levied on the unit quoted rate. (b) The closure / non-operation will be communicated by Engg-in-Charge duly recommended by user. Separate register to be maintained.

M&L for scraping & preparation of new/old treated horizontal concrete or bituminous surfaces of roads, pavements exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) complete all as specified and directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac or equivalent make as specified as approved by GE in writing. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Line lazer with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.

Desilting of storm water drain by surface excavation in soft/loose soil settled deposited soil /earth/silt/mud etc not exceeding 15cm deep from bed of drain, dressing in 'V' shape to drain including cleaning of shrubs, vegitation and grass etc whatsoever with therein, bed of drain including getting out and removing excavated material and deposited the same to a distance not exceeding 50 m complete all as specified and directed.

Taking down cement plaster from brick walls/ stone walls etc. of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar (1:4) on brick walls or concrete surfaces with mechanical means, finished even and smooth without using extra cement, using WPC @ 3 Kg / Sqm by weight of cement complete all as specified and directed.

Demolition of cement Concrete surfaces of any description and in any position not other wise specifically provided for pavement of taxi track / runway / Disperasl area complete all as specified and directed.

M&L for 100 mm thick PCC (1 :2:4) type B-2 using 40mm graded stone aggregatea) in foundation filling or mass concrete with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Removing demolited concrete rubbish material exc 1.5 Km but not exc 5.0 Km and depositing complete all as specfied and directed

Demolition of brick work/stone boulder masonry,built in cement mortor including all quions,arches, pillars etc complete all as specfied and directed .

Removing demolited concrete/brick work material exc 250 m but not exc 500m and depositing where directed complete all as specfied and directed

M&L for Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces with mechanical means in cement mortar (1:4) finished fair and even without using extra cement etc complete all as specified and directed

M&L for preparing new plastered surfaces of wall by affixing wall care putty rubbing to smooth finishing and applying two coat of 100% premium acrylic emulsion Comouflaging pettern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @09.ltr /10sqm over new prepared and height upto 9 meter complete all as specified and directed. Note : Primer and emulsion to be carried out through airless sprey machine (Mechanical means). Make Asian paint apex ultima/Berger weather coat long life 10/Nerolac excel everlast 12 or eqivalent make as approved by GE in writing.

M&L for preparation of old surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over and including 1mm thick wall care putty complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast 12 or eqivalent make as approved by GE in writing.

17. M&L for providing cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering , slightly rounded or chamfered angles and throating including necessary form works etc complete all as specified and directed.

18. Scrapping the grass and deposited soil from the both edges of PTT / links manually by shovel, hoe or scrapper etc. and cleaning of concrete portion by brooming etc including depositing the rubbish materials not exe 50 m complete all as specified and directed.

Petty repair works to internal electrification comprise of checking of non functional existing electric circuits /wiring of light points/fan points/power points/energy meter etc and checking of fan/exhaust fan,switch/sockets ,DBS/MCCBs /MCB/ and other faults by deploying trained electrician with helper and tools and saftey equipments on daily basis for continuous electric supply and carrying out minor repairs as required to make the items functional or to restore electric supply with and incl tightening of lose and broken connections ,insulating naked wires ,opening of DBs etc and refixing the same after necessary repair.Replacing defective items provided under relevents items here-in-after with and including petty repairs of items/materials i.e. fuses thimbles small wires of any size screw washer nut bolt etc and cutting of backelite sheet for fixing accessories making all electric connections in Md/OTM Accn and in any location within tech area of GE(AF) BKT every day except sunday and holiday during ofiice time complete all as specified and directed. Note for item No (1) (a) Spares shall be measured and paid seperately as 'Supply only' and fixing rate included in quoted rate. (b) In case of functional requirement ,contractor is required to extend th service on sunday and public holidays as notified by Engr-In-Charge.

Supply only in repair switch piano flush type 6 Amp. AC, 240 Volts one way complete all as specified and directed. . Make :- Anchor / Havells/ Legrand or eqivalent make as approved by GE in writing.

Supply only in repair socket 6 Amp. AC, 240 Volts one way complete all as specified and directed. . Make :- Anchor / Havells/ Legrand or eqivalent make as approved by GE in writing.

Supply only bell push flush type single pole one way, 5 Amp, AC,230 V complete all as specified and directed. with frame cover Make :- Anchor / Havells/ Legrand or eqivalent make as approved by GE in writing.

Supply only switch socket combination. Multi purpose 6 Pin 6 Amp flush type AC, 230V complete all as specified and directed. Make :- Anchor / Havells/ Legrand or eqivalent make as approved by GE in writing.

Supply only switch socket combination. Multi purpose 6 Pin 16 Amp flush type , AC, 230V complete all as specified and directed. Make :- Anchor / Havells/ Legrand or eqivalent make as approved by GE in writing.

Supply only angle holder backelite with insulated body AC, 230V complete all as specified and directed. Make :- Anchor / Havells/ Legrand or eqivalent make as approved by GE in writing.

Supply only call bell electric AC, 230V, Single phase, Dingdong type complete all as specified and directed. Make :- Anchor / Havells/ Legrand or eqivalent make as approved by GE in writing.

Supply only Sleek LED mirror light 10 watt rating with diffuser 2ft long twisted flexible copper wire (approx 0.5 mtr long) complete all as specified and directed. Make :- Havells cat part No ENDURALINEARNEOBS10WLED865SPCWH/Philips/ Bajaj or eqivalent make as approved by GE in writing.

Supply only sleek surface mounting LED dwonlighting with white diffuser upto 10 watt luminaire for 230 volt AC complete all as specified and directed. Make :- Havells cat pat-INTEGRANXTRDDLRSURD9WLED830S/Philips/ Bajaj cat part no-BGSLO 10WLED Sleek 6W WH RD or eqivalent make as approved by GE in writing.

Supply only reccesed mounting LED dwonlighting with white diffuser upto 15 watt luminaire for 230 volt AC complete all as specified and directed. Make :- Havells cat part No-GLOWDLR15WLED830S/Philips/ Bajaj cat part no-BPSLR 12W WH or eqivalent make as approved by GE in writing.

Supply only square recessed / surface/suspended mounting LED slim ceiling light with extruded aluminium housing and milky diffuser of 36 W 2'X 2' slim panel LED driver 240 V ,50 Hz complete all as specified and directed. Make :- Havells cat part no-PLANO2X2PLR36WLED840S/Philips/ Bajaj cat skylux BZRSQL36W Gz1NW or eqivalent make as approved by GE in writing.

Supply only LED tube RETRO LED 16 to 22 watt of size 4 ft long complete all as specified and directed. Make :- Havells cat part No-photon ultra 2.01213T8SSTL18WLED865SPC/Philips/ Bajaj cat part No-T8-112432/ or eqivalent make as approved by GE in writing.

Supply only capacitor 2.5 mfd complete all as specified and directed. Make- EPCOS/Havells/M-CAP or eqivalent make as approved by GE in writing.

Supply only Fan down rod made out of GI pipe (medium grade) 15mm bore and 1.20 meter long including rubber real and suitable nuts and bolts,safty pin complete all as specified and directed.

Supply only exhaust fan louvers made out of mild steel suitable for exhaust fan of size 300mm sweep including taking down old complete all as specified and directed.

Supply only plug top 3, pin 15 Amp complete all as specified & directed. Make-L&T/Havells/Goldmedal or eqivalent make as approved by GE in writing.

Supply only stepped fan regulator flush type two module, 100 watt, AC, 230V, Single phase, complete all as specified and directed.

Supply only stepped fan regulator (single module) flush type , 100 watt, AC, 230V, Single phase, complete all as specified and directed.

Suplly only modular type electronics fan regulator (single module), 100 watt, AC, 230V, Single phase, complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated copper conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 1.5 Sqmm solid copper conductor complete all as specified and directed. Make :- Plaza/Finolex/Polycab or eqivalent make as approved by GE in writing.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fitting and fixture and such as as switches, sockets ceiling rose,pendent holders,regulators,light fittings any type removing materials to store in safe custody or for credite etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in and including making good the disturbed surface of wall with colour washing /distempering the surface to match the existing one in non metallic rigid PVC conduit medium grade 2 mm thick medium 20/25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of 1 to 8 module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete all as specified and directed. Note:- surface Conduit shall be laid in celing portion only. Make: Plaza/RR kabels/polycab/Finolex or eqivalent make as approved by GE in writing.

Ditto all as per item No 40 but one bell point controlled by one 5 Amp bell push complete

Ditto all as per item No 40 but point wiring for One 5 Amp socket point controlled by one 5 Amp switch on same board with cable 1.5 sqmm.

Ditto all as per item No 40 but point wiring for One 5 Amp socket point controlled by one 5 Amp switch independent board with cable 1.5 sqmm.

Ditto all as per item No 40 here-in-before but with two single core FRLS-H PVC insulated & PVC unsheathed copper conductor cable of size 2.5 Sqmm 1100 volts grade and one single core PVC insulated &PVC sheathed multistranded copper conductor cable of size 2.5 Sqmm 1100 Volts grade as earth continuity conductor including PVC surface / concealed conduict of size 20 to 25 mm with all accessories for 3 pin 15 Amps socket point on independent board complete all as specified and directed. Make of Cable :- RR kabels/ Plaza/Finolex/Polycab or equivalent. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex or eqivalent make as approved by GE in writing.

M&L for point wiring with two single core PVC insulated unsheathed stranded FRLS-H copper conductor cable of size 1.5 Sqmm 1100 volts grade in and including PVC casing capping of size 20 to 25 mm with all accessories and one single core PVC insulated unsheathed stranded copper cable of size 1.5 Sqmm 1100 Volts grade as earth continuity conductor connected to common earth dolly, switch board complete with PVC rectangular type box heavy duty for mounting the switch socket etc complete as specified for the following :- (a) One light/Fan / Exhaust point controlled by one 5 Amps switch one way complete Make of Cable :- RR kabels/ Plaza/Finolex/Polycabor equivalent. Make of PVC casing :- AKG/ Plaza/ Jindal / Finolex or eqivalent make as approved by GE in writing.

Ditto all as per item No 45 but one 3 pin 5 amp socket outlet on independent board controlled by one 5 Amp switch

Ditto all as per item No 45 here-in-before but with two single core PVC insulated unsheathed stranded FRLS-H copper conductor cable of size 2.5 Sqmm 1100 volts grade and one single core PVC insulated unsheathed stranded copper conductor cable of size 2.5 Sqmm 1100 Volts grade as earth continuity conductor for 3 pin 15 Amps socket point on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module type complete all as specified and directed. Make- Goldmedal/L&T/Crabtree(Havells)/Legrand or equivalent or eqivalent make as approved by GE in writing.

S&F Modular switch 1 way 16A 1 module type complete all as specified and directed. Make- Goldmedal/L&T/Crabtree(Havells)/Legrand or equivalent or eqivalent make as approved by GE in writing.

S&F Modular Socket 6A 3 pin combined 2 module complete all as specified and directed. Make- Goldmedal/L&T/Crabtree(Havells)/Legrand or equivalent or eqivalent make as approved by GE in writing.

S&F Modular Socket 16A - 3/5 pin combined 2 modulecomplete all as specified and directed. Make- Goldmedal/L&T/Crabtree(Havells)/Legrand or equivalent or eqivalent make as approved by GE in writing.

S&F ceiling Rose, surface, bakelite 65 x50 mm three terminals, AC, 230 Volts complete all as specified and directed.

S&F in repair decorative box type fitting for LED tube 16 to 22 watt luminaire for 230 volt AC,for LED tube 16 watt to 22 watt complete all as specified and directed. Make :- Havells/Philips/Bajaj cat part No-LUMILINESMART 20WLED865PCWH or eqivalent make as approved by GE in writing.

M&L in repair for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed FRLS-H copper conductor cable of size 4 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as specified and directed. (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate). Make of Cable :- Plaza/Finolex/Polycab/RR or equivalent. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex or eqivalent make as approved by GE in writing.

M&L in repair for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper FRLS-H conductor cable of size 6 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed copper conductor cable of size 6 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as specified and directed. (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate). Make of Cable :- Plaza/Finolex/Polycab/RR or equivalent. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex or eqivalent make as approved by GE in writing.

M&L in repair for Submain wiring with 2 single core PVC insulated FRLS-H multistrand copper conductor cable of size 10 Sqmm drawn into and including non metallic heavy duty rigid PVC conduit not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all conduit fittings / accessories and 1 run single core 10 Sq mm FRLS-H multistrand copper conductor cable as continuous earth wire complete. (Note for submain wiring: 2 run of single core cable and 1 run of earth wire will be measured as one length). Make of Cable :- Plaza/Finolex/Polycab/RR or equivalent. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex or eqivalent make as approved by GE in writing.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 2.5 Sqmm solid aluminium conductor complete all as specified and directed. Make :- Havells/ Plaza/Finolex/Polycab or eqivalent make as approved by GE in writing.

Taking down old unserviceable main switches/DB’s up to 100 Amps capacity fixed in wall and making good of all disturbed surfaces as per existing .

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 4 way, AC,240 volt with 200 Amp bus bar rating complete all as specified and directed. Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 8 way, AC,240 volt with 200 amp bus bar rating complete all as specified and directed. Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 12 way, AC,240 volt with 200 Amp bus bar rating complete all as specified and directed. Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

S&F sheet metal enclosure double door (MCB DB) three phase and neutral with 200 Amps rated bus bar TPN, 4 way verticall type, with provision of MCB incommer, AC, 415 Volt complete all as specified & directed Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

S&F sheet metal enclosure double door (MCCB DB) three phase and neutral with 200 Amps rated bus bar VTPN, 4 way vertical type, with provision of MCCB incommer, AC, 415 Volt complete all as specified & directed. Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as specified and directed.. Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

S&F MCB single pole, 32 to 40 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as specified and directed. Make :- Legrand /indoasian/L&Tor eqivalent make as approved by GE in writing.

S&F MCB DP 40 to 63 Amps 240 Volts, 50 Hz, 10 KA breaking capacity complete all as specified and directed. Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

S&F MCB Four Pole 40 to 63 Amps 415 Volts, 50 Hz, 10 KA breaking capacity complete all as specified and directed. Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

S&F MCB Four Pole 100 Amps 415 Volts, 50 Hz, 10 KA breaking capacity complete all as specified and directed. Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

S&F MCCB 4 pole 100 / 125 Amp 415 volts 50 HZ 25 KA breaking capacity complete all as specified and directed. Make :- Legrand /indoasian/L&T or eqivalent make as approved by GE in writing.

M/s A S Associates (BID ID -3159717)

M/s JS Constructions (BID ID -3160055)

M/s R K Associates (BID ID -3159550)

Industrial Traders (BID ID -3159925)

KP ELECTRICAL AND AUTOMATION (BID ID -3160206)

Tecj Nirmaan (BID ID -3159662)

M/s BHAGIRATH INFRA & ALLIED WORKS (BID ID -3160002)

M/S PRATAP BUILDERS (BID ID -3159532)