Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹71.2 LAccepted-AOC RONGMEN BLOCK IV NEAR UMROI MILITARY STATION P O BARAPANI SHILLONG 793103 | SHILLONG | RI BHOI | MEGHALAYA | 793103 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹73.7 L+₹1.4 L (1.97%)Rejected-Finance RONGMEN B IV BARAPANI PO SHILLONG 793103 | RI BHOI | MEGHALAYA | 793103 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹76.9 L+₹4.6 L (6.40%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹78.5 L+₹6.3 L (8.65%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
22 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
CWE Shillong, SE Falls, Shillong - 793011
SPL REPAIR TO BLDG NO. ASC - 09 (OTM) AT UMROI MIL STN UNDER GE UMROI
2022_MES_552561_1
8592/UMR/E8
Open Tender
Civil Works
Item Rate
180 days
GE Umroi
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE Umroi
₹1.4 L
Yes
18 Nov 2022
17 Sept 2022
24 Oct 2022
17 Sept 2022
22 Oct 2022
8 Oct 2022
Amount
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each of any discription complete all as specified and directed.
All as per item No 1.00 above but area n.exc. 1.5 Sqm each complete.
Material and labour for plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M clear span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, complete all as specified and directed.
Supply and fix factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.
Supply and fix pressed steel door frame 125x60 mm with one or more rebate incl necessary fixing lugs hinges, lock strike plate etc, complete all as specified and directed.
Supply and fix 32 mm thick waterproof and fire proof Flush door shutter, solid core construction, with particle board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.
Supply and fix 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.
Supply and fix 100 mm long medium weight, cold rolled mild steel Butt hinge complete all as specified and directed.
Supply and fix 150 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.
Supply and fix 150mm aluminum anodised bow handle complete all as specified and directed.
Supply and fix 100 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.
Supply and fix 100mm aluminum anodised bow handle complete all as specified and directed.
Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
Supply and fix extruded aluminium alloy handle, fabricated type, anodised, 150mm, complete all as specified and directed.
Supply and fix butt hinges 100mm long (type C-21) extruded aluminium alloy, complete all as specified and directed.
Supply and fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, (aluminium frame Colour approved by GE) windows, ventilators, partitions etc. with one or more rebates including jointing cleat for fixing etc, complete all as specified and as directed.
Supply and fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters (sliding type), aluminium section weighing not less than 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and as directed.
Material and labour for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.
Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.
Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including fillets, complete all as specified and as directed.
Dismantling rail, post, rafter, purlin, etc in framed work, under 40sqcm in section, complete all as specified and as directed.
Providing and fixing false ceiling of designer tile ivory painted (high pressure steam cured) of 4mm thick (as per IS:14862) of size 595x595 mm and any one of the design (cascade or electra) in true horizontal level. Suspended on interlocking metal grid of hot dipped galvanised steel section (galvanised @120 gms both side inclusive and black painted groove on all T webs) consisting of main T runner with suitable spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mmc/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaced between main T at 600 mm c/c to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids 600mm and size 15x32mm made of 0.3 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grid 600x600 mm and all angle of size 24x22x0.4 mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grill, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions /literature. GI adjustable wire of 2 mm dia with galvanised butterfly level clips spaced at 1200 c/c along main T bottom exposed width of 15mm of all T section of 2mm dia GI wire shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5mm width complete all as specified and directed.
Dismantling of floor hearth or wall tiling incl cement mortar bedding removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Material and labour for roughening the surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry @ 3.0 Kg of cement per Sqm, complete all as specified and directed.
Material and labour for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling course, complete all as specified and as directed.
Material and labour Screed bed or bedding layer of 15 mm thick, in cement mortar 1:6 complete all as specified and directed.
Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting all as specified and directed by Eng-In-Charge.
Material and labour for coloured Non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floor etc complete all as specified and directed.
Material and labour for coloured Non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floor etc complete all as specified and directed.
Material and labour for Coloured Glazed ceramic tiles 350 x 250 x 7 mm/450x350x7 thick, set and jointed as in dado or vertical surfaces in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Material and labour for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Material and labour for 20mm thick screed bed or bedding layer of cement mortar (1:4) as in floor complete all as specified and as directed.
Material and labour for pre polished machine cut kota stone slab flooring 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.
Material and labour for pre polished machine cut kota stone slab flooring 18 to 20mm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, complete all as specified and as directed.
Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black, complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.
Material and labour for complete removal of exisiting treatment on wall surface and apply two coats of oil bound distemper over 1.5mm thick wall care putty and priming coat complete all as specified and directed.
Material and labour for preparing old plastered surfaces of ceiling and applying one coats of white wash, complete all as specified and as directed.
Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) all as specified and directed.
Material and labour for preparation of old steel based paint surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) all as specified and directed.
Taking up or down GI tubing 15mm bore from wall/ceilings including all fittings segrated and stacking the pipe, complete all as specified and directed.
Supply and fix for CPVC pipes of 20 mm outside dia, SDR 11 and plain CPVC SDR 11 fittings on walls/ ceiling or laying in wall/ceiling or laying in floors complete all as specified and directed.
Taking up or down GI tubing 20mm bore from wall/ceilings including all fittings segrated and stacking the pipe, complete all as specified and directed.
Supply and fix 3-layer PP-R Polypropylene random copolymer) of 20 mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. with all fittings and fixed complete to wall and ceiling or laid in floors and making connection with old GI tube/PPR pipe using suitable section complete leakproof all as specified and as directed.
Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc., and cutting, chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc 10cm girth complete all as specified and directed.
Supply and fix in repair rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 1000 Ltrs capacity hoisted and fixed in position complete all as specified and directed
Supply and fix 20 mm dia ball valve, high pressure of epoxy coated Aluminium rod and high density plastic ball complete, screwed for iron pipes or brass ferrule and fixed.
Supply and fix 25 mm bore gun metal globe or gate valve ISI marked with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
Supply and fix in repair pillar tap 15mm bore fancy type, cast copper alloy with capstan heads, chromium plated serewed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed.
Supply and fix as in repair, 15mm bore Bib tap long body with wall flange fancy type chromium plated cast copper alloy with capstan head screwed down, screwed for iron pipe or for brass ferrule all as specified and directed
Supply and fix angle valve with wall flange 15mm bore cast copper alloy chromium plated complete all as specified and directed.
Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type,low level flushing cistern white complete with inlet, ball valve float and handle incl bracket complete all as specified and directed
Supply and fix in repair MS chromium plated soap dish heavy grade fixed to walls with brass screws complete all as specified and directed.
Supply and fix PVC connection pipe 15mm size & 450mm long with chromium plated brass coupling on both ends complete all as specified and directed.
Supply and fix as in repair vitreous china wash basin, white, flat back size 550 x 425 x 195 mm, excluding tap, waste chain, plug and porcelain stopper but including brackets, flush pipe, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Supply and fix in repairs Plastic water closet seat cover, coloured , closed pattern with flat bottom, and cover including mild steel chromium plated or aluminium hinging device complete all as specified and directed.
Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white including white plastic water closet seat & back with flat bottom and cover mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed.
Supply and fix in repair vitreous china squatting pan 'Orrisa' pattern long pan size 580x 440 mm , white with foot rest (excluding flushing cistern and flush pipe) but including cast iron trap and making good to floor complete all as specified and directed.
Supply and fix in repair concealed stop cock with long shank and flange cast copper alloy, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions all as specified and directed.
Supply and fix in repair CP waste coupling 32mm (half or full thread) complete all as specified and directed
Supply and fix Grating doom 100mm dia of PTMT (Minimum weight 25gm) complete all as specified and directed
Supply and fix in repair 75mm PVC floor trap with grating including jointing to wate pipe fixed in cement concrete type B-1 (1:2:4) in 75mm dia complete all as specified and directed.
Supply and fix aluminium door seal of suitable section fixed to door shutter with screws complete all as specified and directed.
Cutting holes in brick walls (exc half brick but not exc one brick) built in cement mortar for inserting hold fast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and directed.
Material and labour for plain cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in surface channel and saucer drain etc complete all as specified and directed.
Extra for forming fair finished of drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds etc complete all as specified and directed.
Taking down cement plaster from brick/concrete surface including racking out joint hacking for key scrubbing down with water etc complete all as specified and directed.
Material and labour for 15mm thick rendering in two layer on brick work or concrete surface of wall. 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement surface finished even and fair without using extra cement over 10mm thick plaster in cement mortar 1:6 complete all as specified and directed.(Note : WPC shall be measured & paid separately)
Supply only water proofing compound.
Material and labour for rendering 15mm thick on brick or concrete surface of wall in cement mortar 1:6 surface finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over 2mm thick wall care putty on wall complete all as specified and as directed.
Material and labour for preparing new plastered surfaces of ceilings and applying two coats of white wash, complete all as specified and as directed.
Material and labour for complete removal with mechanical process & preparation of old decorative surfaces of walls, washing rubbing down and stopping of distempered of existing old treatment of wall and applying 1.5mm thick wall care putty and two coat of weather proof exterior emulsion upto three storey building, complete all as specified and directed. Note- 1) All painting will be done through mechanical process(Spray Painting) masking and cleaning of floor,door,windows etc during spray painting. 2) The quoted rate shall be inclusive of Scaffolding also
Material and labour for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even and fair without using extra cement, complete all as specified and directed.
Dismantling AC/GI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets complete all as specified and directed.
Supply and fix of Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ridge/ cladding to wall, fixed with self tapping screws as specified and directed by Eng-in-charge.
Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Supply and fix of mild Steel work Fe 410-W (Gde E250) quality-B in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
Material and labour for taking down of existing roof treatment from roof and terrace, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following steps and specifications:- a) Applying crack seal compound of same manufacture of waterproof to fill all cracks of observed on the roof. b) Applying cement slurry over concrete surfaces @3kg/sqm. c) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound as per manufactures’ instruction(not less than 3% by weight of cement) on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course). d) Applying evenly one coat of primer coating (diluted with water in the ratio specified by Manufacturers) (min @100-110Sq Ft per liter (diluted quantity)) on the cleaned plastered surfaces. The surface shall be left for air dry for minimum period of 2-3 Hrs. e) Applying evenly one coat of elastomeric water proof coat in one direction (as specified by Manufacturers)(min@ 0.9-1.0 sqm per ltrs) and allow to air dry for 4-6 hrs before applying second coat in other direction perpendicular to the first one (as specified by Manufacturers) (min @0.9-1.0 sqm per ltrs. The total thickness of two coats shall be 0.5 to 0.6 mm. f) The whole system shall be left for air cure for minimum Seven days (without any movement). Note : - (i) The waterproofing shall be carried out in the last stage of execution to avoid any damages during the execution. (ii) Payment against this item shall not be allowed till completion of all the stages of work for any slab. (iii) Product should confirm ASTMD-6083 (iv) The work shall be executed through authorised applicator as per manufacturer’s instructions after obtaining written approval from the GE
Supply and fix aluminium window/ventilation powder coated [Minimum 50 Micron thick] anodised aluminium sliding frame and shutter with 92 mm x 31.75 mm x 1.5 mm thick three track section for frames and 40 x 18 x 1.55 mm thick sliding section for shutters of both gauzed and glazed with 5 mm thick tinted glass, aluminium Deco Grill of Model / Design No. DG 102 and stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] including necessary jointed, cleats powder coated glazing clips, powder coated aluminium snap beadings, screw and aluminium fittings, suitable handle cum complete and as directed incl complete removal of old window with frame and finishing the surface complete all as specified and directed.
Taking down PVC eaves gutter and rain water pipe/waste water pipe (any size or description) including all fixtures, heads, shoes, bends, swan necks etc including stacked at site and also removal from site complete.
Supply and fix 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) bend any radius complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) branch piece , single (single Y) equal or unequal with access door complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
Supply and fix bands, straps, supports or stays for rainwater, large hasp and staple, chains, clamps, hold fasts, wall ties etc and small articles confirming to Fe290 Gde-E-165, complete all as specified and as directed.
Supply and fix in repair Harrison rails, anodised aluminium alloy, with fixing brackets, stops, rollers etc.complete all as specified and as directed.
Supply and fix in repair aluminium anodised brackets for curtain rod complete all as specified and directed.
Material and labour for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded stone aggregate) as in plinth protection finishd even and smooth with out using extra cement complete all as specified and directed.
Material and labour for complete removal of loose/ cracked concrete excluding reinforcement if required from RCC roof projection, chajja, fins, facia etc and making good with PCC (1:1.5:3) type A0 using 12.5 mm graded stone aggregate) in any slab and in any position finsihed the surface even and smooth with out using extra cement including necesary formwork and weldign/binding of reinforcement ( excluding reinforcement) if required and applying 2 coats of cement base paint to match with existing surfaces complete all as specified and directed. (Note reinforcement will be measured and paid seperately under respective item)
Material and labour for TMT bars 5 to 10mm dia, cut to length, bent to shape required, in stirr ups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips complete all as specified and directed.
Material and labour for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) over one coat of pink primer complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed.
Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix in repair shower rose CP fix to iron pipe 15mm all as specified and as directed.
Demolition of cement concrete (un reinforced) in filling of sunken floors of WC. Taking down existing damaged vitreous China squattling pan. Taking down existing water proofing treatment of any description from sides and bottom of sunken floors, roughening surfaces of old concrete surface by picking, sweeping clean and washing down with water to remove duse, etc and carrying out the following:- (a) Sunken slabs to be given 1:2 slope outward 40 mm bore PVC pipe spout with 450 mm long projection beyond outer surface of wall shall be provided. (b) Rendering, 15 mm thick screed bed or bedding layer of cement mortar (1:2), mixed with Pidiproof [email protected] ltr bag of cement as per manufactures instructions on fair faces of brick wall or concrete surfaces of sides and bottom of sunken floor and finishing surface even and smooth without using extra cement. (c) providing waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @0.30 Kg/Sqm applying hot applied bitumen 85/25 @ 1.20 Kg/Sqm providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00 mm thick, weighing 3.50 Kg/Sqm with surface finish of white mineral, by torch on application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction on sides and bottom of sunken floor. (d) Material and labour for providing PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in mass concrete in sunken floor. (e) Water tightness of sunken portion to be tested by ponding with water for 72 hours. In case of even a slight mark of seepage, the portion to be treated and ponding shall be carried out again to confirm the water tightness of sunken slab. Note -1: Approx size of sunken floors in WC, 2.50 Sqm and 450 mm (D). Note -2: No cutting in roof slab/beam shall be allowed for passing of CI pipes/PVC pipes & fittings. The stage of water proofing to sunken floor slab shall be passed by Engr-in-Charge/GE. Note -3: Removing of all debris of sunken floor incl demolished sqatting pan to outside MoD land.
Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. to be measured separately) and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good the disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed.
Taking down carefully MCB DBs SP/TPby unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.
Material and labour for point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through in and including PVC conduit of suitable size concealed wiring including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed as below :- Note:-Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed.
One light/exhaust fan point controlled by one,one way switch complete.
One 3 Pin 5 Amps socket out let point on independent board complete.
One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switches complete.
One light point controlled by two, two way switch complete.
All as per item No 106.00 here-in-before but using 2.5 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed.
Supply and fix of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specifed and directed.
Supply and fix of switch piano flush type 240 Volts 5 Amps, SP, two way complete all as specifed and directed.
Supply and fix of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified and directed.
Supply and fix of socket 3 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified / directed.
Supply and fix switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified and directed.
Supply and fix ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified and directed.
Supply and fix ceiling fan regulator electronic,Deluxe,rotary, step type, 120/280 V complete.
Supply and fix in repair of MCCB TPN DB 4 way vertical type double door,IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, suitable for MCCB's upto 125 Amps as incomer complete all as specified and directed.
Supply and fix in repair of MCB SPN DB 8 way double door,IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed.
Supply and fix in repair of MCCB 125 Amps 415 volts four pole, 16 KA Thermal and Magnetic,adjustable overload setting complete all as specified and directed.
Supply and fix in repair of MCB SPN 32 Amps 'B' Series 10 KA ,240 volts complete all as specified and directed.
Supply and fix in repair of MCB SP 6 to 32 Amps 'B' Series 10 KA, 240 volts complete all as specified and directed.
Supply and fixing bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as directed.
Supply and fix of LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.
Supply and fix LED inverter batten fitting 1x18 watts including Tube rod, Min housing Aluminium front cover PC,Battery backup 3-4 hours after fully charged, 230 Volts, system lumen efficiency ≥ 80lm/W,CRI ≥ 80, THD≤30% ,Driver efficiency≥85%, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.
Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (medium grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.
Material and labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn thorugh in and including PVC casing capping of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking down the old sub main wiring complete all as specified. Note: Two run of 6 Sqmm cable and one run of casing capping and one run of 4 Sqmm earth continuity wire for connection to DBs/dolly shall be measured as one unit length.
Supply and fix PVC blanking plate, one module sutable for MCB DB complete all as specified and directed
Supply only LED bulb of 9 Watt (Warm white).
Material and labour for cutting of circular hole in any type of wall suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including,making good to disturbed surfaces of wall to match as per the existing colour complete all as specified and directed.
Supply and fix Heavy duty metallic body exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver.
Supply and fix of wall mounted LED batten with polycarbonate housing and integrated electronic driver of capacity 12 W.
Supply and fix all in one comprising of high efficiency LEDs (120 lm/W), solar street Light with luminaire wattage 15W, High Efficiency Mono Crystalline Solar PV Module 12V 50W, lithium Ferro phosphate battery 12.8V 18Ah with inbuilt BMS technology, high efficiency LED >93%, MPPT solar charge controller and aluminium extruded body, specially designed intelligent microwave sensor to control the dimming nod brightness of light leads to extend working time and 4 mtr long octagonal pole (type CPT-4030) top dia 70 mm bottom dia 130 mm sheet thickness 3 mm including base plate of size (L x B x T) 200 x 200 x 12 mm, bolt size 4 x 16 mm dia and bolt length 450 mm, including taking down old unserviceable solar light of any capacity complete all as specified and directed.
Supply and fix of ceiling fan 1200 mm (minimum) sweep, BEE 5 star rated with BLDC technology, AC single phase 230 watt, including smart remote with long lasting battery to control speed, multipairing, timer and other intelligent memory functions, suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose to ceiling fan. Complete including taking down of old ceiling fan and provn of fan down rod are as per ground requirement complete all as specified and directed. Note:- Old ceiling fans shall be deposited to MES store.
M/s Jaiswal and Co
MOINUL HOQUE CHOUDHURY
M/S Nakul Chandra Samal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .