CWE/FZR-32/2024-25 SPECIAL REPAIR OF DCM CELL OF BLDG NO NP-01 AND NP-02 OF FD REGT UNDER GE(WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified. Note :- Demolition of Mud puska to be cut in average thickness from top surface of roof for creating the slope as directed

Material and labour 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @ 3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately

Material and labour for applying evenly a coat of industrial bitumen 85/25 primer @ 1.2 Kilogram per square metre including preparation of roof surfaces complete all as specified and directed.

Material and labour APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified complete all as specified and directed.

Material and labour for App Membrane to be finished with one coat of solar reflactive bituminous based aluminium Paint @ 0.1 kg per sqm complete all as specified and directed.

Supply only water proofing compound.

Brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed.

All as per item srl No 8 here in before but using old brick tiles retieved from dismantling under item No 1 here in before including cleaning and removal of mortar from tiles.

Material and labour Cover fillet in Plain Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate min radius of 75mm tk as in roof and parapet wall junction , roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary sloping on roof including form work complete all as specified.

Dismantling of floor hearth and wall tilling incl mortar bedding removing serviceable tiles to store and rubbish off the premises as directed

Material and labour for Vitrified ceramic tile 10 mm thick (square or rectangular) polished area of each tile not exc 0.36 SM in floors etc.., set and jointed in neat cement slurry and pointed in white cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Dark shade

Material and labour for Vitrified ceramic tile 10 mm thick (square or rectangular) polished on vertical surfaces such as in skirting /dado etc area of each tile not exc 0.36 SM in floors etc.., set and jointed in neat cement slurry and pointed in white cement to match including 10mm thick plaster bed in CM 1:3 complete all as specified and directed. Dark shade

Material and labour Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified.

Material and labour Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality on vertical surfaces such as in skirting /dado etc area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified.

Material and labour Glazeded ceramic coloured (colour & shade as approved) tile 450x350x7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specifide.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including notching/nosing/easing including 15mm thick screed bed in CM 1:6 complete all as specified and directed.complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar.

Material and labour for 100 mm thik Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub bases,floors and paving etc. complete all as specified.

Material and labour Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed.

Material and labour sand filling under floors or in foundations including watering and consolidation complete all as directed by Engieer-in-charge .

Material and labour for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat CM 1:4 complete including moulding at corners and polishing type all as specified and directed

Supply and fixing in repair powder coated aluminium anodized door/window shutters,aluminium section weighing 0.55 kg/mtr including necessary joining cleats, glazing clips,rubber neoprene packing handles 2 Nos in each door,hinges screws etc complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Glass panes shall be measured and paid separetly. (ii) The quoted rates shall be inclusive of cost of rubber beading however it will not be weighed and paid separetly.

Material and labour for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side complete all as specified and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.

Material and labour for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete , all as specified and directed.

Material and labour fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings

Supply and fixing Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

Supply and fixing Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tesile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

Demolition of un-reinforced cement concrete in any position complete all as specified.

Material and labour Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified.

Material and labour for 3 mm thick glass dividing stripps,38 mm and inserted in position to confirm to design complete all as specified and directed. width of strip

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item No 36 here-in-before but using old bricks retrieved from demolition under item 36 hereinbefore including cleaning and removal of mortar from old bricks.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.

All as per item No 39 herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004).

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.

Supply and fixing Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O

Supply and fixing 1mm thick Mild steel, plain, black sheet in wall cladng, eel gats and similar work, cut to size, holes punhed, including round headed screws, clout nails or rivets and fixed to wood or steel faming with plain 40mm lap joint with riveted or welded seams icluding bendig or turning up, mitred angles, etc as required complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified

Supply and fixing 75mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified.

Supply and fixing Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

Supply and fixing in repair mild steel 20 mm dia curtion rod powder coated fixed with fancy type chromium plated with bracket complete all as specified.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

Rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

Rendering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

Rendering 10 mm thick cement plaster on ceiling surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified

Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

Material and labour for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as directed.

Material and labour for preparing newly plastered surfaces of wall and applying 2 coats of distemper oil emulsion over 2mm thick wall care putty complete all as directed of any shade on walls surfaces

Preparation of old treated plastered surfaces including complete removal of existing treatment and applying two coats of cement base paint complete all as specified.

Material and labour for Preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified

Material and labour for Preparation of old plastered surfaces of walls & applying two coats coats of white wash complete all as specified.

Material and labour for White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified.

Material and labour for White wash in two coats on old plastered surfaces of ceiling including preparation of surfaces complete all as specified.

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc. 25cm hard and dense soil.

Material and labour cement concrete type C-2, 1:3:6 ( 40 mm graded aggregate) in foundation filling mass concrete for post holes etc complete all as specified and directed.

Supply and fixing Steel work in tabular trusse incl. special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 11614-1979 grade St-240

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified

Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified. (Pipes obtained from item 65 to be reused).

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified. (Pipes obtained from item 66 to be reused).

Supply and fixing in repair gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe. complete all as specified.

Supply and fixing in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.

Supply and fixing in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and as directed by Engr -in- charge .(Make : Prayag , Essco)

Supply and fixing in repairs brass chromium plated long body bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and as directed by Engr -in- charge .(Make : Prayag , Essco)

Supply and fixing in repairs chromium plated cast copper alloy 1-way angle cock with flange suitable for 15mm bore pipe, complete all as specified and as directed by Engr -in- charge (Make : Prayag, essco )

Supply and fixing wall mixer with 'L' bend (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engr -in- charge (Make : Prayag, Essco )

Supply and fixing in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engr -in- charge . (Make : Prayag , Essco).

Supply and fixing in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union.complete all as directed

Supply and fixing Cabinet Mirror (400mm x 500mm) complete all as specified and as directed by Engr -in- charge (Make : Prayag Cat No.554)

Supply and fixing in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and as directed by Engr -in- charge

Supply and fixing in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (including flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Material and labour Corner glass shelves 300 mm radious,8mm thick as per sample radious for bath room, fixed on suitable support of brass chromium plated clips complete all as directed (Make: Prayag Cat No BEA -46 or equivalent.)

Supply and fixing Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified.

Supply and fixing Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified.

Toilet paper holder of brass, chromium plated or stainless steel fixed in repair to walls with chromium plated (CP) brass screws , complete all as specified.

Supply and fixing in repair vitreous China wash down water closet pan one piece of Size 665 x 360 x 750 mm with integrated cisteren, seat cover and twin flush settings including soft close seat cover and connection to drain complete all as specified and directed. Make :- Prayag (SAGA) or Equivalent.

Supply and fixing in repair Stainless steel plate rack of standard pattern & of size 900 x 750 x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

Supply and fixing in repair 15 mm bore fancy type health faucet with SS hose complete all as specified and directed

Dismantling of boarding, any description, fixed in any position with nails

Supply and fixing 18mm thick Prelaminated particle board,flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelvesincluding 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and directed.

Providing and fixing factory made PVC cup boards/ Shelf / Partition of required size consisting of panel of 18mm thick Celuka PVC Ply and for supporting the hold of Shelf/ Partition and shall provided 3edges in size 18mm x18mm as per required length. The front side of the edge visible in the front of the shelf/ Partition to be edge lipped by 18mm width x 1mm thick PVC sheet using solvent cement etc. complete as direction of Engineer-in-charge, manufacturer's specificaton and drawing.

Supply and fixing 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised

Supply and fixing alluminium anodised handles 125 mm long fixed to windows all as specified and directed.

Supply and fixing 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

Supply and fixing 150mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

Supply and fixing 100mm Butt hinges, heavy weight, aluminium alloy, and fixed

S& F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

Material and labour for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) (i) Qty of ploymer to be used 15% by weight of the cement. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repear this step after 24 hrs as required.(iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as specified and directed by Engineer-in-CHarge. Make : - Epoxy bonding agent shall be Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika or Equivalent complete all as specified and directed.

Taking down eaves gutters and rain water pipes( any size or pattern),including all fittings heads shoes bends swan-necks etc all as specified and directed

Supply and fixing 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

Supply and fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls or laid in trenches complete all as specified and directed.

Supply and fixing 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

Supply and fixing 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

Supply and fixing 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

Supply and fixing 110mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

Material and labour PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified.

Supply and fixing as in repair grating doom 100 mm dia of PTMT(minimum 40 gms) complete all as specified.

Supply and fixing in repair sheet glass assembly concicting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Supply and fixing in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm. complete all as specified and directed.

Supply and fixing in repair 5 mm thick coloured of any selecetd design solid PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed.

Supply and fixing in repair Viterous china wash basin, white/coloured, flat back, size 550x400 mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc and making good distrubed surfaces to match with the existing complete all as specified and directed

Supply and fixing in repairs PVC (SWR) 'P’ trap to IWC/EWC complete all as specified

Supply and fixing in PVC (SWR) 'S' trap IWC/EWC complete all as specified

Manjeet Singh Contractor (BID ID -3192779)

B.L. Chaudhri and Co. (BID ID -3197004)

M/s Sudarshan Enterprises (BID ID -3193865)

KAILASH CONSTRUCTION COMPANY (BID ID -3197010)

M/s Bansi Lal (BID ID -3193690)

manoj and company (BID ID -3193595)

RAKESH KUMAR SATISH KUMAR (BID ID -3192904)