Repair and external painting of Adm Block Remaining part and repairing, maintenance and replacement of Old damaged wooden flooring and electrical work of Conference Hall Adm Block at GC, CRPF, Siliguri

Amount

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 ltr/10 sqm)

Supplying, fitting and fixing 08 mm thick HDF (high density fiber) Laminated PVC flooring work conforming to EN13329:2006 with plank size not Iess than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2 mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 840 kg/m3 substrate core over a rasin saturatedbacking layer and installing through unilin or tongue- groove system (having locking strength not less than 900 kg/m) over a 2 mm thick underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc.and tretment of termit with approved chemical (With Chlorpyriphos/Lindane E.C. 20% with 1% concentration) over the surface and as required complete in all respect with requisite accessories like endprofile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including allother incidental works as per direction & satisfaction of Engineer in charge. (This work should not be executed without specific permission of Engineer incharge).

Supplying,fittting and fixing PVC Laminate Floor Accessories (Skirting, End edge, T moulding Reducer ) to 08 mm thick HDF (high density fiber) Laminated flooring conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groov locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 840 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 900 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect as per direction & satisfaction of Engineer in charge.

Providing 600 mm X 600 mm 28-36 watt LED ceiling light

1.5 Sqmm copper wire (with colour code) 90 mtr roll

1 sqmm 2 core copper cable (100 mtr roll)

2.5 Sqmm copper wire(with colour code) 90 mtr roll

Providing 08 way metal box

Providing 08 way modular outer plate

Providing 6 amp modular socket

Providing 10 amp modular switch

Providing plug & socket 20 A SPN with plastic plug for AC

K.DAS AND CO.