PROVN OF UTENSILS WASHING POINT NEAR COOK HOUSE AT BLDG NO T-14-18 WITH OVERHEAD WATER TANK IN B ZONE AND SPECIAL REPAIRS TO BLDG NO T-48 AND T-49 IN A ZONE AT RMS

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.

S & F 2nd class hard wood scantling as in framed work etc clean sawn complete including dismantling of old from its position all as specified and directed.

M&L for second class hardwood plain fillets exceeding 13sqcm and not exceeding 25sqcm, square or rectangular in section, wrought, secured with nails or brads complete all as specified and directed.

M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exc 6 m mean radius in CM (1:4) including demolition of old brick work etc complete all as specified and as directed.

M&L brick work with sub class B bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick work etc complete all as specified and as directed.

M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exc 6 m mean radius in CM (1:4) etc complete all as specified and as directed.

M&L brick work with sub class B bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling of old asbestos cement sheets etc complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old asbestos cement sheets etc complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

M&L for 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers even and smooth without using extra cement using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement) including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including M&L for GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed. Note:(WPC will be measured and paid separately)

M&L for 12 mm thick plastering in CM (1:6) on the other side of lathing finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete work finished even and smooth (without using extra cement) using water proofing compound as per manufacturer instruction complete all as specified and as directed. Note: WPC will be measured and paid separately

M & L rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete work even and smooth without using extra cement complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 ,(using 40 mm graded stone aggregates) as in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide that area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping including dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location including dismantling of old ceiling board complete all as specified and as directed.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters ; walk ways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M & L for PCC 25 mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) as in levelling course of floor complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with complete all as specified and directed.

M&L for RCC Nominal Mix Type A-1 (1:1.5:3) (using 20 mm graded stone aggregate)as in slabs supported on walls,beams and columns in floors,roofs,landings balconies,canopies,dack slabs and in shelves and the like complete all as specified and as directed.

M&L form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L for 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work with teak wood beading at the edges complete all as specified and as directed.

S&F 40mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F 125mm size aluminium handles,cast type,anodised complete all as specified and as directed.

S&F in repairs Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws 100mm size complete all as specified and as directed.

S&F 40 mm cupboards knobs fixed with nut screw and washer of mild steel, bright finished complete all as specified and as directed.

M&L for 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for 30mm thick 2nd class hard wood Glazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified.

S&F butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long complete all as specified and as directed.

S&F 150mm long aluminum hook and eye complete all as specified and as directed.

S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of walls including preparation of surface complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of cement primer of approved shade on walls complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint complete all as specified and as directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to GDE Fe 410-0-or Fe 310-0 quality-A including dismantling of wrought iron or mild steel work of any description complete all as specified and as directed.

M&L for providing machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 20mm thick screed bed in CM (1:3) complete all as specified and as directed.

M&L for PCC 100mm thick,(1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil etc complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts wells cesspits man-holes pier holes etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil etc complete all as specified and as directed.

Returning filling in including spreading, leveling,watering and well ramming in layers not exc 25 cm in soft /loose soil complete all as specified and as directed

Removing excavated material n.exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed

Removing excavated material n.exc 100 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed

M & L for Mild steel work in tubular trusses including special shaped washer etc complete in using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 including painted one shop coat of zinc chromate primer paint etc complete all as specified and as directed.

S&F plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with reveted,bolted or welded attachment etc complete all as specified and as directed.

M&L for 100mm thick Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base flooring/ hard standing/pavings/plinth protections etc complete all as specified and as directed.

M&L for PCC 75mm thick,(1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 20 mm thick screed bed (bedding layer) in CM (1:4), complete all as specified and as directed.

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed.

S&F 75mm PVC(SWR) bends any radius complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed.

S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and as directed.

S&F of 110mm dia PVC (SWR) bends complete all as specified and as directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 15mm bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings etc complete all as specified and directed.

S&F 20mm bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings etc complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

S&F CP angle cock 15mm cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L for preparation for newly plastered surfaces and applying two coats of white wash complete all as specified and as directed

M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed.

S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates,using Fe-410 W(GdeE-250) quality-A, complete all as specified and as directed.

S&F for galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 22.5 cm but not exceeding 30cm long and 16 to 20mm dia of neck etc complete all as specified and as directed.

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .

M&L for PCC (1:4:8) type D-2 (using 40mm graded coarse stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for precast cement concrete(1:2:4) type B-1 (using 20 mm stone aggregate) as in slabs round square or rectangular in shape and set in CM (1:4) etc complete all as specified and as directed.

M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping/PVC Conduit pipe including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc of suitable size as required at site complete all as specified and as directed.

One light point controlled by one, one way switch.

One 3 pin socket outlet 5 Amps on the independent board.

S&F Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed.

S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed.

S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and as directed.

M&L for sub main wiring in repairs complete with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme

S&F in repairs LED light fitting 1 x 20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply , fixing in repairs and testing of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting complete all as specified and as directed.

S&F MCB Distribution board double door type SPN 8 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.

Supply and fixing MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with onnection testing and commissioning. complete all as specified and as directed.

Supply and fixing MCB SP 5- 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with onnection testing and commissioning. complete all as specified and as directed.

M&L for laying of LT UG cable , XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 6 sq mm, 2 core including taking out old unsv cable complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.

M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: Punned down thickness shall be measured and paid.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed

Supply and laying tubes light grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 40mm dia bore GI tubing complete incl taking old UNSV complete all as specified and as directed

Material and labour for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected with galvanised earth lead 4mm size by means of nuts, bolts, check nuts and washers made of glavanised iron pipe of 20mm bore (light grade) and other and connected to earthing test point or lightening arrestor or main controlling switch as directed including proviing funnel with 15mm bore galavised iron pipe (medium grade) wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickess) all round the earth electrode, concrete erth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC(1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15cm C/C bothways and suitable handle mad of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50m etc all as shown on electrical plate No.3 of MES schedule Part-I (2009) complete including testing on completion all as specified and as directed . Note : Earthstrip upto 7.5m from earthplate shall be measured and paid in the quoted rate.

M/S MUGHATOLI AYE (BID ID -3447164)

M/S ORIENTAL MOTORS COMPANY (BID ID -3447163)