PROVN OF GALVALUME SHEET SHED AND ASSOCIATED WORKS IN FRONT OF DNCO ROOM AT MAIN GATE AT AF STN MAMAURA

Amount

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth for foundation shafts, wells as in soft loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation fillings and mass concrete complete all as specified and directed.

Returning filling in including spreading levelling and well ramming in layers not exceeding 25 mm thick as in soft/loose soil complete all as specified and directed.

Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 1.50 m above the starting point where directed .

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical for fair finished surfaces of concrete complete all as specified and directed

Use and waste form work to sides of column, pillars shape as square, rectangular or polygon for fair finished surfaces complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 (using 20mm graded crushed stone aggregate) as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc complete all as specified & directed

M&L for reinforced cement concrete Design mix M-25 (using 20mm graded crushed stone aggregate) as in columns, piers, posts and struts complete all as specified and directed.

M&L TMT Bars 10mm dia and over cut to length bent to shape required inculding cranking bending spirally hooping for columns,roofs slab etc and binding with MS wire ennealed less than 0.9mm dia complete all as specified and directed.

All as per item No 9 above but 5 mm dia and over upto and including 10mm dia as in stirrups spacers and binders etc.

S/F steel works in tubular truss, purlins, post etc including special shaped washers complete using ERW or induction butt welded tubes conforming to I.S. 1161 -1979 grade St-240 including one shop coat of Zinc Chromate Primer paint at contractors workshop before fabrication complete all as specified and directed.

S & F MS sheet as In base plate, gusset plate etc welded or riveted to steel staircases including holding down bolts, nuts, rivets etc confirming to Fe 410-W(Gde -E-250)quality -A complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in ridge ,valley gutter etc and fixed with self tapping screws and flat iron complete all as specified and directed.

M & L for preparation of New or previously un-treated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

m/s pal associates

NAVSURAJ CONSTRUCTION AND INFRADEVELOPERS

Spectrum Enterprises