Purchase of Equipments

Equipment Items

CONTROL VALVE CHARACTERISTICS Industrial type "pneumatic control valve of type i) Quick opening. ii) Linear. iii) Equal Percentage * Rust proof tank to store water. * Industrial type Air regulator range of (0-2.1 Bar) to vary the 3-15 PSI pneumatic signal. * One Rotameter is provided for visual indication of flow. * FHP pump is used for water circulation * One bypass water line with hand valve is provided to avoid pump loading and to maintain the pressure drop across the control valve * Bourdon type pressure gauge fixed at input signal and Air input of the control valve to monitor the pressure * Three control valve lined parallel, provided with hand valves for a particular valve study.

MEASUREMENT OF PH * 3 ½ digit display to view the pH value * 0 to 14 pH * 0 to 2000 mV * Combined type Electrode * A glass beaker provided with capacity of 500ml * Buffer tablets provided for pH of 7,4,9.2 * Mimic logics in the front panel.

CONTROL OF LIQUID LEVEL SYSTEM To maintain the level of the water in a overhead tank - Sump and overhead water tank - Level measurement of water in the overhead water tank using Pressure sensor - PID controller - Level set in the PID controller itself - Flow control of water using Electrical actuator controlled by PID controller output - Ball valve to release the water from overhead tank - Panel mounted on MS powder coated stands

PLC UNIT WITH I/O INTERFACE KIT WITH PROXIMITY SENSOR FOR COUNTING AND ON-OFF CONTROL OF MOTOR * 8 Digital inputs (24V DC) * 6 Digital outputs (24V DC) * Memory SI2C 5K words * RS232 communication Interface * Supply voltage 24V DC

MEASUREMENT OF DISPLACEMENT USING ULTRASONIC METHOD *Ultrasonic Type Displacement Sensor Of Type : Ultrasonic Range :(0-1000)mm Supply Voltage:24V DC @ 150mA Output :(4-20)mA *One mechanical moving setup with scale provided to move the displacement sensor. *3 ½ digit Digital indicator provided to display the displacement *In built Regulated power supply. *Mounted On A Closed Cabinet.

MEASUREMENT OF HUMIDITY * One Humidity sensor of Output (0-1)V * In-built temperature Compensation. * Signal conditioner for Humidity sensor. Output (0-5) V DC. * Regulated power supply. * 3½ digit indicator to display the humidity and also temperature. * Powder coated frame with logical diagram. * Detailed Documentation.

Decade Resistance Box

Decade Inductance Box

Decade Capacitance Box

Function Generator

Rheostat (30Ω/1A)

Rheostat (350Ω/1A)

Stop Watch

MEASUREMENT OF TORQUE * Reaction type torque transducer is used to measure the torque of Range (0-9.81) Nm. with fulcrum arm. * Slotted weights with pan provision to applied the load in steps of 100 gms. * A mechanical holder provided to hold the sensor with the table rigidly * A 3½ digit digital indicator to display the torque * Built-in Instrumentation power supply * Zero and gain calibration provision. * Mounted in a sleek Cabinet. * Detailed documentation

MEASUREMENT OF ACCELERATION USING PIEZOELECTRIC ACCELEROMETER /VIBRATION SETUP * Vibration sensor of Piezo electric type mounted in the base plate to sense the vibration of the material. * Precision Rectifier circuit for above sensor. * Signal Conditioner of (0-10)VDC * IC regulated power supply * 3½ digit digital indicator to display the voltage. * Logical diagram in the panel * Mounted in a powder coated closed cabinet.

Measurement of speed using stroboscope setup

BARATHI ENTERPRISES (BID ID -1106037)

GM ELECTRONICS (BID ID -1106207)

Vi Microsystems Pvt Ltd (BID ID -1106386)