Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.7 CrAccepted-AOC A 15 1ST FLOOR PRIYADARSHINI VIHAR DELHI 110092 | SHAHDARA | DELHI | 110092 | ₹1.7 Cr | 1 | Accepted-AOC 1 |
| 2 | 2₹2.0 Cr+₹29.4 L (16.9%)Rejected-AOC 1391 SECTOR 57 PART II 122003 | GURUGRAM | HARYANA | 122003 | ₹2.0 Cr+₹29.4 L (16.9%) | 2 | Rejected-AOC 2 |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | chaudhary Construction Company Pvt. Ltd. L1 | JS SYNERGIES PRIVATE LIMITED L2 |
|---|---|---|---|---|---|
| 1.00 | Supply and installation of Re-Polymer based modules of make (Honeycomb Structure) made up of recycled polypropylene capable of taking vehicular movement up to 30 tonnes with adequate backfilling and 4 small plates combination creating 4 spans inside the module. These modules are made from combination of large (683*410mm) and small (369*410mm) plates along with external locks. Each large plate should have minimum fourteen external locking slots in order to give stability to tank. These tank should have optimum connection and block stability using double lock stability. Each single tank is made of four large and four small plates in case of single tank and 13 large and 16 small plates for quadruple tank. Capacity of single tank is (.683*.410*.450 mtr) equals to 0.126 CUM(gross). Weight of each large plate should be minimum 1.3 Kg and each small plate should be at least .650 Kg. The design to be approved by Engineer-in-Charge. | 1,192.79 | Per Cum | 7,000 ₹83,49,530 Lowest | 8,550 ₹1,01,98,354.5 |
| 2.00 | Supply and installation of non-woven geotextile having thickness of 400 GSM, having minimum tear strength
of 250 ASTM D4533, Width wise minimum 215 ASTM D4533 having puncture strength of 1550 plus as per
ASTM D6241 Having elongation at Break of 57% plus as per ASTM D 4595 in double layers, made out of
long fibres to hold the modules including cutting, sizing, Heat welding and needle punched for high porosity
and proper percolation. complete as per entire satisfaction of engineer-in- charge. | 2,400 | Sqm | 160 ₹3,84,000 | 130 ₹3,12,000 Lowest |
| 3.00 | Supply and installation of FRP based filtration device with diameter of 750 mm and height 1000 mm having
inlet of 160mm and outlet of 160mm. capable of filtration in two stage, upper layer has SS304 mesh which
can filter out solid suspended particle up to 600 microns and lower membranes is capable of filtering up
to 90 microns. Flow rate of filtration device is up to 80 KL / hr. (FRP based RWH Filter). Approved from GRIHA
complete (GRIHA V. 2015: criterion:18, GRIHA V.2019: criterion :15, SVAGRIHA: criterion:9) as per
entire satisfaction of engineer-in- charge. | 24 | one unit | 39,000 ₹9,36,000 Lowest | 41,000 ₹9,84,000 |
| 4.00 | Non Clogging SS filter with flat end having 153 mm inside dia and 163 mm outside dia and
500 mm length, 0.5 mm slot with integrated flange, rubber washer, bolts, PVC fitting,
threaded flange.
Filter is ready to use, flexible and modular: designed for huge volume and flow of rainwater.
The SS 304 filter element is non clogging in nature and can be integrated at various habitats
.Flow rate must be minimum 40 Cum/hr. Wires in filter with a V-shaped profile arrangement. | 60 | per | 19,000 ₹11,40,000 Lowest | 20,000 ₹12,00,000 |
| 5.00 | Providing and fixing UV-stabilized nylon mesh net of 150–200 GSM, mesh opening size
approximately 0.5 mm to 1 mm, cut and wrapped securely around the outlet pipe of SS
wedge wire filter using rust-resistant binding wire or stainless steel clamps. The mesh shall
act as a secondary barrier to prevent fine suspended matter, organic debris, and silt from
entering the recharge zone. It shall be tightly secured and easily removable for routine
cleaning. | 48 | one unit | 450 ₹21,600 | 300 ₹14,400 Lowest |
Tender Value
₹2.4 Cr
EMD Value
₹4.7 L
Closing Date
5 Dec 2025, 12:00 pmClosed
SH SANDEEP KUMAR
Municipal Corporation Gurugram
Construction of 6 Nos. Modular Rainwater Harvesting Systems of 200 Cum Capacity Using Polypropylene Block Structure and 400 GSM Geotextile Sheet in Sector - 15 Part-I and II Parks under Municipal Corporation Gurugram.Recall
2025_HRY_484734_1
20258DB89DAD 0A22 43BF 955C DBA97108E971285ULB
Open Tender
Civil Works
Works
210 days
Gurugram
2 documents required · 2 mandatory
₹15,000
₹4.7 L
Yes
16 Mar 2026
20 Nov 2025
5 Dec 2025
20 Nov 2025
5 Dec 2025
20 Nov 2025
Supply and installation of Re-Polymer based modules of make (Honeycomb Structure) made up of recycled polypropylene capable of taking vehicular movement up to 30 tonnes with adequate backfilling and 4 small plates combination creating 4 spans inside the module. These modules are made from combination of large (683*410mm) and small (369*410mm) plates along with external locks. Each large plate should have minimum fourteen external locking slots in order to give stability to tank. These tank should have optimum connection and block stability using double lock stability. Each single tank is made of four large and four small plates in case of single tank and 13 large and 16 small plates for quadruple tank. Capacity of single tank is (.683*.410*.450 mtr) equals to 0.126 CUM(gross). Weight of each large plate should be minimum 1.3 Kg and each small plate should be at least .650 Kg. The design to be approved by Engineer-in-Charge.
Supply and installation of non-woven geotextile having thickness of 400 GSM, having minimum tear strength of 250 ASTM D4533, Width wise minimum 215 ASTM D4533 having puncture strength of 1550 plus as per ASTM D6241 Having elongation at Break of 57% plus as per ASTM D 4595 in double layers, made out of long fibres to hold the modules including cutting, sizing, Heat welding and needle punched for high porosity and proper percolation. complete as per entire satisfaction of engineer-in- charge.
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Construction of 6 Nos. Modular Rainwater Harvesting Systems of 200 Cum Capacity Using Polypropylene Block Structure and 400 GSM Geotextile Sheet in Sector - 15 Part-I and II Parks under Municipal Corporation Gurugram.
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
BOQ_562758.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .