Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹52.2 LAccepted-AOC OPP SHRI NAVNIKETAN H S SCHOOL CHHOLA KANCHI BHOPAL M P 462 010 | BHOPAL | BHOPAL | MADHYA PRADESH | 462010 | L-1 | Accepted-AOC lowest bidder for the work. | |
| 2 | L-2₹55.5 L+₹3.2 L (6.14%)Rejected-Finance | L-2 | Rejected-Finance other than the lowest bidder | |
| 3 | L-3₹64.9 L+₹12.6 L (24.1%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L-3 | Rejected-Finance other than the lowest bidder | |
| 4 | L-4₹69.0 L+₹16.7 L (31.9%)Rejected-Finance | L-4 | Rejected-Finance other than the lowest bidder | |
| 5 | L-5₹71.6 L+₹19.3 L (36.9%)Rejected-Finance 84 A VIJAY NAGAR COLONY LALGHATI PO NAYAPURA BHOPAL 462032 | 462032 | L-5 | Rejected-Finance other than the lowest bidder |
Tender Value
₹1 Cr
EMD Value
₹1.8 L
Closing Date
16 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt. Col M C Patwardhan, Offg CWE
Headquarters, Commander Works Engineer, Bhopal, Military Engineer Services, SI Line, Bhopal, Pin Code - 462001 (Madhya Pradesh)
SMART PERIODICAL FOR MD AND OTM ACCN AT BAIRAGARH UNDER GE BHOPAL
2024_MES_672060_1
83926/E8
Open Tender
Civil Works
Item Rate
180 days
BHOPAL
AS PER NIT CONDITION
7 documents required · 7 mandatory
₹1,000
Yes
GE BHOPAL
₹1.8 L
Yes
28 Nov 2024
5 Sept 2024
18 Oct 2024
5 Sept 2024
16 Oct 2024
4 Oct 2024
5 Sept 2024 - 4 Oct 2024
Amount
The following precautionary measures shall be ensured by the contractor before and during execution of the work :- (i) All the painting works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company(OEM) and their authorised applicator alongwith performence guarentee otherwise recovary of Rs. 2000 per week will be made from contractor's dues from the date of commencement of work. Entire work shall be executed with the approved firm. All the material of smart periodical is to be precured only from approved firm and as mentioned against each item and application of materials to wall/ceiling surfaces to be done through smart automatic machines only and as mentioned against item No 2 to 10 or wherever applicable . (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. (v) Recovery @ cost of material shall be done from contractor if any material found lying on site after completion of work as per manufacturer's instruction and quality satisfaction of Engineer-In-Charge. (vi) The work shall be executed upto 15 mtr height and cost of suitable scaffolding shall be deemed to be included in quoted rates by the tenderer. (vii) Smart periodical work to be executed in sequential stages and all the stages to be got approved from GE and Engineer-In-Charge. Stage passing register duly signed for each stages to be kept in record. (viii) OEM visit shall be done after completion of Ph-I & Ph-II and guarantee for waterproofing of wall/roof of 05 years shall be given by OEM & Contractor. (ix) The work will be carried out in following steps as appended below :-
M&L for complete removal of old existing treatment of wall (External / internal) and ceiling finishes using mechanical dry wall sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 320 Grit or above to completely remove old existing treatment for wall and ceiling surface and ready to take new surface finishes complete as specified and as directed
M&L for applying waterproof cement based putty @ 0.5 Kg(undiluted) per sq mtr. of average thickness 1.5 mm in two coats on prepared wall (External / internal ) and ceiling surfaces as per sr item No 2 above in following steps:- Step-1) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent. Step 2) Mix the putty powder @ 0.5 kg/sqm by adding 35 to 40% water by volume or as per approved by manufacturer's instructions and mix it with electric putty mixer with the mixing capacity of min 2.5 kg putty per minute upto 5 to 10 minutes. Step 3) Apply the first coat of the prepared mix with the help of fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with bottom to top configuration. Step 4) Allow 6-8 hrs to dry putty surface. Step-5) Apply the second coat of the prepared mix with the help of fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with horizontal configuration. Step-6) Allow 6-8 hrs to dry putty surface then prepare the surface by electronic wall sander machine to apply subsequent coats of primer complete all as specified and as directed.
M&L for applying one coat of acrylic water based Exterior grade primer @ 0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) as per approved manufacturer's instructions to be applied with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces as per sr item No 6 . Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note:- Primer shall be measured and paid separately under relevant item. Make :- Berger HS PU Roof coat primer ,Truecare exterior wall primer ,dulux promise exterior primer , Kansai Nerolac Excel alkali prime .
M&L for applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint @ 0.2 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturer's instruction over prepared and primed surface of external wall with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI as per sr item No 2 to 3 above .Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. Make :- Berger weathercoat long life 15 emulsion paint / Apex Ultima Protek Duralife / Dulux weathershield Powerflexx paint/Kansai Nerolac Excel Everlast 12
Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for 15 mm thick ready mix plaster on brick/concrete/stone surfaces including finishing the surfaces fair and even (without using extra cement) and smooth as per manufacturer's direction complete all as specificed and directed. Make :- Ultratech readyplast, JSW Enduroplast, Hiscon Industries
M & L for applying Two coats of Damp proof coarse external paint (Primeless high build water based elastomeric exterior wall waterproof acrylic coating for exterior surfaces) designed with weather resistant acrylate polymers, UV resistant and good hiding and spreading,developing a strong intercoat adhesion with the substrate therefore no separate primer is required, features such as Waterproofing, UV protection, Anti algal resistance, crack bridging of elastic films covering hair line cracks, long term protection, colour variants. Preparation of surfaces by cleaning the surfaces till it is free from dust , grease and flaking paint , any unstable paint to be removed , using high pressure wash or scraper , whichever is appropriate . Algae and fungus on the wall to be removed by using high pressure wash or coir brush and shall be treated with fungicidal solution , all surface cracks upto 5 mm width should be filled up with Crack-X-paste. Cracks more than 5 mm and all separation gaps should be filled up with URP modified mortar or as specified complete all as specified and directed by Engr-in-Charge. Note : 1. Application for verticle surface fresh plaster or repainting on old prepared surfaces. 2. Use it directly from the container. Stir contents well before use. 3. Brush/ roller apply a self priming coat of it on the vertical wall surface in SSD condition, diluting 1 litre with 100 ml clean potable water. Allow it to dry for 4-6 hours. 4. Apply a coat of it without dilution as waterproof top coat, either by roller or brush with force coverage at the rate of 3.7- 4.1 Sqm / litre to achieve DFT of 100- 110 microns. Allow it to dry for 4- 6 hours. Lighter shades of white base on the top of dark colours need additional coat for finishing. 5. An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall etc. Allow the coating to full air cure for 7 days. Make: Dr Fixit rain coat Neo, Berger damp shield elasto, Asian smartcare damp proof
M&L for applying one coat of acrylic water based interior grade primer @ 0.7 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per approved manufacturer's instructions to be applied with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces as per sr item No 2 & 3 above Allow 6-8 hrs to dry the surface for subsequent distempering complete all as specified and directed. Note:- Primer shall be measured and paid separately under relevant item. Make :- Asian royale wall base coat primer, Nerolac premium primer, berger BP white primer.
M&L for applying with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.04 ltr per minute having a pressure of 3300 PSI of paint application with a flow speed of 2 ltr per minute having pressure of 3300 PSI two coats of high-sheen, anti- fungle , anti bacterial, low-VOC & highly washable luxury emulsion paint with @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per manufacturer's instruction taflon surface protector of shade as approved complete all as specified and as directed. Make:- Asian (Royale shyne luxury emulsion ) / Kansai Nerolac Impressions white 24carat premium luxury emulsion paint / Dulux valvet touch Diamond Glo /Berger paint (Silk Glamor Luxury Emulsion)
M&L for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Make:- Asian apcolite premium gloss enamel / Luxol High Gloss Enamel paint / Nerolac synthatic enamel high gloss / Dulux Gloss premium enamel paint.
M&L for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed. Make:- Asian apcolite premium gloss enamel / Luxol High Gloss Enamel paint / Nerolac synthatic enamel high gloss / Dulux Gloss premium enamel paint.
Supply & fixing in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
M&L in repair 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.
M&L in repair 3 mm thick sheet glass frosted on one side , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.
M&L for preparing old surface of eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying one coat of synthatic enamel paint complete all as specified and as directed. Make:- Asian apcolite premium gloss enamel / Luxol High Gloss Enamel paint / Nerolac synthatic enamel high gloss / Dulux Gloss premium enamel paint.
Complete removal of unservicable PCC of any type and in position from shunken floor complete all as specified and as directed
M & L for brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed
M&L for rendering 15mm thick polymer waterproof mortar plaster using Sika Latex ® SBR @ 0.675kg/m2 in ratio 1:4:8:32 (Sika Latex ® SBR : water: cement : sand) or equivalent mixed mechanicaly with water or as per manufacturer's instruction to wall & slab of sunken or structural repair in patches etc. including taking down old unservicable plaster porperly and prepare surface for application of new plaster complete all as specified and as directed
M&L for filling and mass concrete type E-2 1:5:10 using 40mm graded stone aggregate in sunken floor complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material & labour for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.
Material & labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:4 cement mortar complete all as specified and as directed.
Material & labour 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in levelling coarse complete all as specified and as directed.
Material & labour for glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in vertical surface skirting / dados etc complete all as specified and as directed.
Material & labour for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Material & labour in repair 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
Material & labour in repair 15mm dia conceled stop valves long shank , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
Supply & fixing in repair 10 litres, capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
Material & labour in repair 15mm dia Bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
Material & labour in repair 15mm dia medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old pipe complete all as specified and as directed.
Material & labour in repair 20mm dia medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old pipe complete all as specified and as directed.
Supply & fixing 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
Supply & fixing in repair 75mm PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including clamps complete all as specified and directed
Supply & fixing in repair 110mm PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or fixed to walls including clamps complete all as specified and directed
Supply & fixing 110mm PVC (SWR) junction single (single `T') equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed
Supply & fixing 110mm PVC (SWR) bend inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed
Supply & fixing 75mm PVC (SWR) bend inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed
Supply & fixing in repair light coloured vitreous china wash hand basin white available shape as approved of 550mmx400mm (minimun) on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified and as directed.
Material & labour Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
Material & labour in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed.
Material & labour in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
Material & labour in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
Supply & fixing in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete all as specified and as directed.
Supply & fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Material & labour in repair brass chromium plated shower rose 125mm size fixed to 15mm bore GI / CPVC pipe complete all as specified and as directed.
Taking down and refixing shutter exc. 1 sqm and not exc. 2 sqm in same opening complete all as specified and as directed.
Taking down existing old roof treatment of any description, any type including removal of old Tar felt, screed bed and plastering etc complete all as specified and directed.
Material & labour for roof treatment to RCC roofs with and including comprising of following steps:- (a) M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing with provision of neat cement slurry with 3.0kg of cement per sq. metre. (Note: - Water proofing compound will be measured and paid separately.) (b) M & L for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction complete all as specified and as directed. (c) Providing bituminous primer grade 85/25 bitumen @ 1.2 kg/Sqm in each coat to be applied on prepared surface till the surface is properly impregnated complete all as specified and as directed. (d) Applying APP based polymeric membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified and as directed. (e) M&L for preparing new bituminous APP membrane surfaces and applying two coats of aluminium paint complete all as specified and as directed. Note:- (i) Ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the roof slab at least for 72 hrs to be done. (ii) Taking down carefully cables and ACs and removing materials to MES store for keeping in safe custody for re-use at site in functional as earlier and making good disturbed surface of walls, floors, roofs etc. complete all as specified and as directed.
M&L for writing letters, figures & digits (Block. Roman, Italic or Indian) building Nos 25 centemeter height with black background and white letters as approved by Engineer-In- Charge complete all as specified and as directed.
M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc. complete all as specified and as directed.
Supply only integral waterproofing compound complete all as specified and as directed.
Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)
Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as spfd and directed.
S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed.
S&F rolled mild steel work as in rafter, purlins, trusses and like (beam, tee, angle, channel or flat sections (Fe 410-W(Gde E-250 quality) complete all as specified and directed.
Providing, cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
Removing loose concrete from chajjas, parapets, fascias, pillars, columns etc n exc 2 sqm on plan and repairing the same with cement mortar 1:3 cement concrete type B-0, 1:2:4(12.5 mm graded stone aggregate) incl white washing/ distempering/ weather proof paint/ cement base paint as per existing surface complete all as specified and directed.
RAJPATI CONSTRUCTION (BID ID -3141026)
JYOTI ENTERPRISES (BID ID -3134255)
M/S Blues Developers Pvt. ltd (BID ID -3141358)
POONAM ELECTRIC INDUSTRY (BID ID -3134326)
M/S AJAY JAIN (BID ID -3134283)
M/S RAKESH TRADERS (BID ID -3141296)
S R BUILDERS AND SUPPLIERS (BID ID -3140991)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .