REPAIR OR REPLACEMENT OF ELECTRIC WIRING INCLUDING

Amount

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete, including fittings such as switches,ceiling roses,pendants,regulators sockets etc.,removing from site and making good disturbed surfaces of walls,floors,ceiling etc.,all as directed

Material and labour for point wiring with 1.50 Sqmm PVC insulated un sheatned multi stranded copper conductor cable (FRLSH) 1100 volts grade two single core conforming to IS-694-1990 and one run of continious earth wire with 1.50 Sqmm PVC insulated unsheatned stranded copper conductor cable (FRLSH) draw in and including heavy duty 20 mm dia PVC conduit (ISI marked) in concealed with all necessary fittings and fixures with GI sunken boxes with earth dolly and 3 mm laminated cover sheet suitable for fixing switch, socket, regulator, fan point, exhaust fan point etc. including making good disturbed surface with CM (1:4) to match with the existing surface complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for conduit, cover plate and box of suitable module, cutting chases of wall, making good disturbed wall. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

One light/ fan point/ call bell controlled by one, one way switch

One light point controlled by two nos, two way switch

One bell point controlled by one bell push

One 5 pin 6 Amps switch socket outlet point controlled by one switch on independent board.

One 5 pin 6 Amps switch socket outlet point controlled by one switch on same board.

All as per Item No 2.00 but One 3 pin socket outlet. 15 amps, independent, with cables 4 sq. mm size complete all as specified.

Material and labour for point wiring (surface type) with 1.5 Sqmm PVC insulated (FRLSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping with all accessories and sunk cast pressed steel terminal box made out of MS sheet of 1.6 mm thick for mounting of fittings like switch, socket and fan regulator with3mm thick hylum laminated/bakalite sheet cover complete all as specified for the followings:- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for 'N' capping and box of suitable module. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

One light/ fan point/ call bell controlled by one, one way switch

One light point controlled by two nos, two way switch

One bell point controlled by one bell push

One 5 pin 6 Amps switch socket outlet point controlled by one switch on independent board.

One 5 pin 6 Amps switch socket outlet point controlled by one switch on same board.

All as per Item No 4.00 but One 3 pin socket outlet. 15 amps, independent, with cables 4 sq. mm size complete all as specified.

Supply and fix as in repairs Switch piano, flush type single pole one way 6 Amps 240V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs Switch piano, flush type single pole two way 6 Amps 240V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs bell push flush type 6 Amps. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket outlet , 3 pin 6 Amps 240 V flush type . Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket combination, 2 in 1, 5 pin 6 Amps 240 V ,flush type. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket combination, 2 in 1, 5 pin 6 Amps and 16 Amps 240 V ,flush type. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs call bell ding dong type SP 230V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs ceiling rose surface baklite with three terminals 240 V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs lamp Angular holder insulated body with back plate suitable for batten fittings all as specified. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in replacement LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 12-15W LED surface mounted downlighter with white powder coated aluminum housing with integrated electronic driver and all accessores complete all as directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 9W LED decorative brushed nickel finish wall light fittings including bulb and all accessories complete all as directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement decorative, wall mounting, chrome finish fixture with opal glass diffuser suitable for 7.5 W A60 LED filament lamp E27 base complete all as per manufacturer instruction. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fixing as in replacement 60W LED Gate light in aluminum die cast with modern artistic design and white PC diffuser suitable for retrofit LED lamps. complete all as directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement sheet metal enclosure MCB DB SPN with 200 Amp rated bus bar 8 way 240 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix as in replacement sheet metal enclosure MCB DB SPN with 200 Amp rated bus bar 12 way 240 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix as in replacement sheet metal enclosure MCCB DB TPN with 160 Amp rated bus bar 4 way 415 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix as in repair MCB SP 240 volts, 50 Hz capacity 6-32 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fix as in repair MCB SPN 240 volts, 50 Hz capacity 40 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fix as in replacement MCCB, adjustable type thermal magnetic release type,4 poles, 415 Volts, Ics = 100% Icu, Lcu = 36 KA breaking capacity, rating 160 Amps including all fixing accessories with both ends spreader links Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Material and labour for Sub main wiring with PVC insulated unsheathed two run of 4.00 Sq. mm single core multistand copper conductor cable (FRLSH), 1100 volt grade alongwith one run of 4.00 sqmm PVC insulated and unsheathed copper conductor cable (FRLSH) 1100 volt grade, connected to common earth dolly as earth continuity conductor, drawn through 25 mm x 16 mm PVC casing caping including taking out existing wiring complete all as specified and directed. Note: (a) PVC casing 'N' caping including accessories shall be measured measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) The Payment shall only be allowed after production of original GST defaced purchase vouchers by Engr- In- Charge Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

Material and labour for Sub main wiring with PVC insulated unsheathed two run of 6.00 Sq. mm single core multistand copper conductor cable (FRLSH), 1100 volt grade alongwith one run of 6.00 sqmm PVC insulated and unsheathed copper conductor cable (FRLSH) 1100 volt grade, connected to common earth dolly as earth continuity conductor, drawn through 25 mm x 16 mm PVC casing caping including taking out existing wiring complete all as specified and directed. Note: (a) PVC casing 'N' caping including accessories shall be measured measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) The Payment shall only be allowed after production of original GST defaced purchase vouchers by Engr- In- Charge Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

Material and labour for Sub main wiring with PVC insulated unsheathed two run of 10.00 Sq. mm single core multistand copper conductor cable (FRLSH), 1100 volt grade alongwith one run of 10.00 sqmm PVC insulated and unsheathed copper conductor cable (FRLSH) 1100 volt grade, connected to common earth dolly as earth continuity conductor, drawn through 32 mm x 16 mm PVC casing caping including taking out existing wiring complete all as specified and directed. Note: (a) PVC casing 'N' caping including accessories shall be measured measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) The Payment shall only be allowed after production of original GST defaced purchase vouchers by Engr- In- Charge Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

Material and labour for earthing complete with galvanised steel earth plate electrode 60 cm × 60 cm.× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including taking out old earthing complete all as specified and directed.

Material and labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire including taking out existing conductor complete all as specified and directed.

Material and labour for excavating in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for taking out/laying of under ground cable, pole or stay and getting out in soft/loose soil, complete all as specified and as directed.

Returning filling in soft/loose soil, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed. NOTE : The top of filled trench shall be made proud by using the excavated soil to cater for subsequent settlement of soil.

Removing excavated materials (soils) not exc 50.00mtr and depositing where directed at a level not exc 1.50 mtr above the starting point in soil, complete all as specified and as directed.

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 50 Sqmm 3.5 Core laid in trenches / ducts/ inside protection pipe including cable glands, lugs and suitable size of MS saddle clips etc. also including taking out existing UG cables all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ Gloster (ISI Marked)/ KEI (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately

Supply and filling for dry sand in cable protection trenches before and after the cables are laid, for sand cushioning to cables complete all as specified and directed. NOTE : thickness after punning of sand shall be (minimum as specified in SSR) measured and paid in this item.

Material and labour for brick protection for UG XLPE cable with burnt clay old size sub class 'B' bricks laid dry and flat abutting each other with gaps between adjacent brick not more than 10mm and width equal to length of brick in trenches across the cable complete all as directed by Engineer-In-Charge. Make: Best quality locally available which is duly approved by GE.

Material and labour for tubes "light grade" galvanised with all fittings laid in trenches of 40mm bore dia. Make : Tata / Jindal Steel / Prakash/ Surya Roshni ltd

M/S DEEDAR ENTERPRISE

S K ENTERPRISE

M/S RAGHU NATH SAH

madan enterprise

M/S BISWA CONSTRUCTION

kapoor and co

M/s Gupta Construction

MAHINDER ELECTRICALS