E-Tender No. 89/2024-25, EUDC-II, Noida.

Amount

fo|qr forj.k [k.M & prqFkZ] nknjh ds dk;Z{ks= esa jfuax bZ&fufonk }kjk tek ;kstuk en esa 1 o”kZ dh vof/k esa Lohd`r izkadyuksa ds vuqlkj ,yVh@,pVh fo|qr ykbZu] ehVfjax flLVe] ifjorZd ,oa vU; fo|qrhdj.k ra= dh f'kf¶Vax bR;kfn lEcfU/kr leLr dk;Z djus gsrq jafux dkWUVªsDVA

Removal of old and used AB Cable and ACSR Conductor from the both side spans of pole and removal of HT/LT Line accessories from old, damaged, shifted Pole and Carriage of its from work site to JE Store/Any Store Centre of PVVNL Discom including loading and unloading at both ends.

Removal of all line accessories from the Pole and Dismentaling of old, Damaged and Shifted ST/PCC Pole by digging of Pole pit in Pakka/Kacha Road with the help of road cutter/digging machine, Tractor etc and Carriage of old and Damaged ST/PCC Pole from work site to JE Store/Any Store Centre of PVVNL Discom including loading and unloading at both ends.

Re-Straightening of Tilted ST/PCC Pole after digging of Pit at Kaccha/Pakka Road of suitable size adjustment of PCC/ST Poles with proper grouting as per norms and complete work in all respect.

Repairing of broken/badly damaged/Rusted/Coroded S.T Poles (damaged at ground level) in existing H.T/L.T lines due to extra ordinary rusting & scaling. From bottom side welding of 4/5 pieces( approx 75 cm. long) of angle iron of size 50x50x6 mm. Ist of all digging of pit around the pole of size 1.0 mtr. x 1.0 mtr. x 1.0 mtr. is to be done and then cleaning of rust & de-scaling with the help of hard wire brush & chisel and then MS angle iron of size 50x50x6 mm in 4/5 pcs. of required length as per site requirement varying from 70 cms to 75 cm to cut down and then to be welded with the healthy top and bottom portion of the pole with Ist class electric welding with own welding generator set in such as way that on top of bottom potion over-lapping of healthy part is covered 200 mm length approx. before welding the poles where top & bottom portion are separated, the same are to be kept in alignment safely & after completing the above work, the pit should be refilled. Concreting of S.T Pole for grouting (0.285 cu mt.) cement, stone blast) Making plinth of above repaired ST pole in round shape of height 0.30 meters from ground level having outer dia of 500 mm size in CC 1:3:6 in cement, sand , Stone ballast etc. and completer the work in all respect as per RESPO.

Carriage of New 8.5mt./9mtr/11Mtr./13 Long PCC and ST Pole from Any Store of PVVNL Discom/Central Store, Shaibabad/Sector 20, Noida/J.E Store to work site including safe loading and unloading at both ends. (STP - 20 Nos. AND PCC 60 Nos. all length of Poles.)

Carriage of Single Pole line accessories, Double pole accessories as Cross arm, M.S channel, Angle, V Disc Insulator with fitting, GI Wire, Barbed Wire, Pin Insulator with pin, Distribution Box, Dropper channel, Stay Set, Earthing Complete, Fuse Set, T-off Channel, T/F Base Angle, Termination Kit, Straight Through etc. any other items mentioned in Estimate or material issued from Store as required for complete the work including loading and unloading both ends and Fixing the above accessories on Pole with complete work in all respect.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all Nut bolt & washer and other accessories . for Single Pole as following :

Single support on ST Pole 9/11/13Mtr. Long

Single support on PCC Pole 8.5/9/11Mtr. Long

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer and other accessories. Four Pole, Three Pole, Double Pole Structures of PCC and ST Pole .

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. The work are as Follows : Single Pole, Double Pole, Three Pole, Four Pole.

S.T pole 9/11/13Mtr. Long

8.5/9/11 Mtr PCC Poles.

Fixing of Stay set complete as per site requirement.

Driving and Fixing of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. (MATERIAL IN THE SCOPE OF DEPARTMENT)

Cartage and Laying lifting, stringing & proper sagging of 4/5 phases ACSR conductor (LT/HT) in accordance with Line chart includidng binding and fixing of all accessories in Conductor in parallel as per site requirement for New conductor on H.T/L.T line for New Connection to Consumer with binding, jumpering etc.including complete connections in all respect, from any Store Centre of PVVNL to work site including safe loading and unloading at both ends.

ACSR Dog Conductor.

ACSR Weasel Conductor.

ACSR Rabbit Conductor.

Carriage of new LT ABC cable 50/70/ 95/120 Sqmm from Store Centre, Sahibabad to work site including safe loading and unloading at both ends with laying, lifting and sagging of ABC cable and fixing of all types clamps & connection with complete work in all respect.

size 50/70 sqmm

size 95/120 sqmm

Shifting of 11/0.4 KV, 25/63/100/250 KVA/400/630/1000 KVA T/F from the site and Re-Installation of same T/F at including loading and unloading the T/F on Plinth/Double Pole/as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

Shifting of LT/HT Metering System, CT/PT with Cubicle,BREAKER,VCB ETC. From the site and RE-Installation of same System at proposed site including loading and unloading both sides with mounting on double pole/Meter Room or Plith and making all the connections complete in all respect.

Re-Sagging of Loose LT/HT line of ACSRConductor and complete work properly as per RESPO.

Re-Sagging of Loose LT line of AB Cable and complete work properly as per RESPO.

Tigtening & Re-winding of jumpering by ACSR Conductor as per site requirement with complete work in all respect.

Supply, Fixing, Painting and Errection of the Following material by the Contractor on his own cost.

Different Types of MS Nut & Bolts as per site requirement.

RED OXIDE PAINT

ALUMINIUM PAINT

Number Plate

Danger Board

Holding Clamp

Dead End Clamp

J Hook for Suspension

AAYANSH ELECTRICAL SOLUTIONS (BID ID -5065916)