REPAIRS TO JOINERY FALSE CEILING PLASTERING FLOORING PLUMBING AND SANITARY FITTINGS AT TECHNICAL AREA ZONE -1 UNDER GE I RND RCI HYDERABAD

Amount

Demolition of PCC in ground floors and paving's not exceeding 15cm thickness (below or above ground level) complete including disposal of debris off the premises all as directed by Engineer in Charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.

M&L, 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring, finishing the surface even and smooth using extra cement including necessary formwork complete all as specified and directed.

M&L, light coloured vitrified tiles in floors of size 600 x 600 x 9 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 300 x 300mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 400 x 400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, coloured glazed ceramic tiles of size 300 x 200mm/ 300 x 450mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, 20mm thick, approved pre polished Granite work (of any type, table rubbed and polished) edges rounded in steps, cooking platform and the like laid over and including screed bed or bedding layer 15mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.

M&L, 20-25mm thick Machine cut kola stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including screed bed or bedding layer 15mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of stone complete all as specified and directed.

Taking down existing PVC flooring of any thickness and description in any position including cleaning and disposing of rubbis material off the premises complete all as directed.

M&L, 2mm thick flexible PVC laminated flooring, coloured, marbled mosaic or mottled finish conforming to IS, laid with approved rubber based adhesive as per manufacturer's instructions in floors complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin white 550 x 400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size complete all as directed

S&F in repairs, vitreous china oval shaped wash hand basin, white or coloured of size 550 x 440mm or as per existing at site mounted on granite top including PVC waste pipe and coupling of suitable size complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete including fixing to floor with bolts, including provision of plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repairs, extended wall mounted water closet with cistern, white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete fixing to wall with bolts all as specified and directed. Make: Hindware CAT No 20084 and 21052 or techno commercially equivalent in Parryware or Jaquar

S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern of size 630 x 450mm, white, with integral foot rests, including connection to trap, and to flushing pipe, antisyphonage pipe, etc., complete including provision of cement concrete bedding in 1:5:10 and making good to floor complete all as specified and directed.

S&F in repairs, chromium plated Hand Shower (Health Faucet) with 8mm Dia 1.2meter long flexible tube and wall hook complete all as specified and directed. Make: Jaquar CAT No 573 or techno commercially equavalent in Hindware or Parryware

S&F in repairs, vitreous china Urinal, half stall type with sensor, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., complete all as specified and directed. Make: Jaquar / Hindware /Parryware / Cera

S&F in repairs, vitreous china Urinal, half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., complete all as specified and directed.

S&F in repairs, 10 litres, PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs, chromium plated towel rail 20mm dia, 600mm long, premium quality all as directed.

S&F in repairs, plastic water closet seat cover, white, closed pattern with recessed bottom and cover aluminized hinging device complete all as specified and directed.

S&F in repairs, waste coupling of PTMT (half or full threaded) (Minimum weight 45grams), 32mm bore dia of discharge pipe complete all as specified and directed.

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs, stainless steel kitchen sink with drainage board, 1mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking up or down 15mm bore steel tubing along with connections and all fittings from trenches / walls / floors complete all as directed.

All as per item No 28 above but 20mm bore of pipe.

All as per item No 28 above but 25mm bore of pipe.

All as per item No 28 above but 40 or 50mm bore of pipe. Note for item No 28 to 31: Excavation and earthwork if any will be measured and paid separately.

S&F, 15mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or concealed in walls, ducts/ceilings or laid in floors complete all as specified and directed.

All as per item No 32 above but 20mm bore of pipe.

All as per item No 32 above but 25mm bore of pipe.

All as per item No 32 above but 40mm bore of pipe.

All as per item No 32 above but 50mm bore of pipe.

S&F in repairs GI equal TEE for 15mm bore of pipe, ISI marked complete all as specified and as directed.

All as per item No 37 above but 20mm bore of pipe.

All as per item No 37 above but 25mm bore of pipe.

S&F in repairs GI elbow for 15mm bore of pipe, ISI marked complete all as specified and as directed.

All as per item No 40 above but 20mm bore of pipe.

All as per item No 40 above but 25mm bore of pipe.

S&F in repairs GI socket for 15mm bore of pipe, ISI marked complete all as specified and as directed.

All as per item No 43 above but 20mm bore of pipe.

All as per item No 43 above but 25mm bore of pipe.

S&F in repairs, 15mm bore chromium plated two way angle valve, fancy type, premium quality complete all as specified and directed.

S&F in repairs, 15mm bore bib cock, long body, chromium plated with wall flange complete all as specified and directed. Make for item No 46 & 47: Jaquar, Parryware, Hindware, ESS, MARC

S&F in repairs, 15mm bore bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90grams) complete all as specified and directed.

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm bore swan neck pillar cock, chromium plated with wall flange complete all as specified and directed. Make: Jaquar, Parryware, Hindware, ESS, MARC

S&F in repairs, chromium plated urinal spreader complete all as specified and as directed.

S&F in repairs, chromium plated push water tap/cock complete all as specified and as directed.

S&F in repairs, 32mm dia PVC flexible waste pipe with fittings of suitable length as per site requirement for WHB/Sink or urinal including taking down old waste pipe complete all as specified and directed.

S&F in repairs, PTMT grating round of size 125mm (minimum weight 40grams) complete all as specified and directed.

M&L in repairs, Cast iron floor trap, 100mm (diameter of outlet) with grating including jointing to waste pipe fixed in PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified.

Carrying out repairs of flushing cistern of any description and capacity by adjusting the float valve, checking and arresting leakage from PVC connections and bend including replacement of washer as per manufactuer's instructions and check nuts complete all as directed.

S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S&F in repairs, 15mm bore Stop valve of PTMT any colour high pressure screwed for iron/GI pipeor for union (Minimum weight 90grams) complete all as specified and directed.

S&F in repairs, 20mm dia Gun metal, globe or gate valves with iron wheel head, ISI marked screwed both ends for iron/GI pipe and fixed complete all as specified and as directed.

All as per item No 60 above but 25mm globe or gate valve.

All as per item No 60 above but 40mm globe or gate valve.

S&F in repairs, 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

All as per item No 63 above but 25mm bore ball brass valve.

S&F in repairs, 500 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.

All as per item No 65 above but 750litres capacity.

All as per item No 65 above but 1000litres capacity.

S&F in repairs, 75mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete all as specified and as directed.

S&F in repairs, 110mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete all as specified and as directed.

S&F, 75mm bore PVC(SWR) bends any radius complete all as specified and as directed.

S&F, 110mm bore PVC(SWR) bends any radius complete all as specified and as directed.

S&F in repairs, 75mm bore PVC(SWR) vent cowl complete all as specified and as directed.

S&F in repairs, powder coated aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat for fixing etc., fabricated complete to received sheet glass and prelaminated board complete all as specified and as directed.

S&F in repairs, Anodized aluminium door shutters with aluminium section weighing 0.55Kg/m including necessary joining cleats glazing clips, rubber neoprene packing, handles 2 No in each door, hinges, anodized aluminum snap beading, screws etc. complete all as specified and as directed.

S&F in repairs, 5mm thick float glass, plain, ordinary quality exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F in repairs, 5mm thick Tinted glass ordinary quality exceeding 0.50Sqm in each pane complete all as specified and directed.

M&L in repairs, 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed to aluminium framework complete all as specified and as directed.

S&F in repairs, Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. Make: DLINE/OZONE/DOORSET/EVERITE/INDOBRASS

S&F in repair, Door closer hydraulically regulated aluminium (die cast) body designation No 3 universal type suitable for door shutter of weight between 61 to 80Kg ISI marked complete all as specified and directed.

S&F in repairs, Aluminium door Lock seven lever vertical type brass body, 100mm long with duplicate key complete all as specified and directed. Make: Godrej/Link/Harrison/Everite

S&F in repairs, Standard EPDM rubber beading for fixing of glass in partitions or doors complete all as specified and directed.

S&F in repairs, powder coated aluminium window handles as per existing at site, left or right, fixing with bolt & nuts complete all as directed.

S&F in repairs, stainless steel door lock suitable for existing glass door with duplicate keys complete all as directed.

S&F in repairs, stainless steel 'H' type handles, 450mm long including screws complete all as directed

S&F in repairs, brass mortice lock vertical type of size 100mm, 4 levers complete all as specified and directed. Make: Godrej / Link / Harrison

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm and not exceeding 4Sqm complete all as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

Taking down shutters of any description from the frames exceeding 2Sqm complete all as directed.

S&F, second class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

S&F, mild steel work as in hold fast etc., and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L, PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in bed blocks for holding hold fast including necessary formwork complete all as specified and directed.

S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

S&F in repairs, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F in repairs, 75mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F in repairs, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs, 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs, 150mm size, 'D' type, aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F in repairs, 100mm size, 'D' type, aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F in repairs, aluminium anodized round handles for aluminium doors complete all as specified and as directed.

S&F in repairs, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs, solar control film 50micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F in repairs, Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed. Make: Vista Levlor / AMAR / MAC / MARC

S&F in repairs, Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and as directed.

Welding in position at site, mild steel butt hinges and projecting type hinges exceeding 2.5cm but not exceeding 5cm in length and thickness of metal to be welded not exceeding 6mm thick complete all as directed.

Resecuring or easing and adjusting without taking down shutters of any description exceeding 1Sqm and not exceeding 2Sqm each complete all as directed.

Taking down existing aluminium partition alongwith door with connected fittings of any description carefully, resizing, refabricating and refixing in new alignment or place including use of new screws and cleats as required at site complete all as directed by Engineer in charge.

Taking down existing aluminium door shutter alongwith with connected fittings of any description carefully, adjusting floor spring/hydraulic door closer, locking device, oiling the components for smooth opening and closing in place and refixing the same complete all as directed by Engineer in charge.

Taking door existing wooden door shutter and resecuring the hinges in new or old positions for smooth functioning of door including painting with synthetic enamel paint to affected area complete all as directed.

M&L, preparing surfaces of wood and wood based materials, steel and iron work/new or old, of any description and girth not otherwise described and treated with tar or coal tar black paint complete all as specified and as directed.

M&L, preparing surfaces of wood and wood based materials, steel and iron work/new or old, of any description such as treating ends of posts, backs of chowkats, etc., area tarred not exceeding 0.1Sqm each and treated with tar or coal tar black paint complete all as specified and as directed.

M&L, preparation new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Hacking out old putty from wooden or metal frames and taking out serviceable glass from windows or ventilators, and refixing the glass in its original position after cleaning and glaze with putty or fixed with beads, complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames, or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F, 3mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F, 3mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F, 4mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F, 4mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F, 3mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F, 12mm thick frameless toughened glass for doors with bevelled edges including pivot hinges at top and bottom, stainless steel 'H' type handles, locking arrangement with lock and keys in duplicate and taking down old broken glass door with fittings complete all as directed.

Complete removal of existing treatment from internal surfaces of walls and ceilings thoroughly by machine grinding and applying two coats of wall care putty, sand papered and making surface even and smooth to receive emulsion paint and applying two coats of oil bound distemper, white or tinted complete all as specified and as directed.

Dismantling false ceiling along with ceiling and wall boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as directed.

S&F, powder coated aluminium snap grid frame work for false ceiling, grid size 605mm x 605mm with GI hangers of 6mm dia, upto 1200mm length, adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including provision of 12mm thick perforated particle board tiles in ceiling fixed with screws as per manufacturers instructions complete all as specified and as directed.

S&F, GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to alround wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm, suspended from soffit at approximately 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clip across at 457mm centre to centre including provision of 12mm thick gypsum board in ceiling fixed with screws as per manufacturers instructions and finishing with two coats of oil bound distemper complete all as specified and as directed.

S&F, Armstrong false ceiling with board of size 600 x 600 x 12mm thick including Armstrong grid work all as manufacturers instructions complete all as specified and directed.

Re arranging the existing false ceiling of any description and type by taking down existing ceiling boards/tiles, straightening the grid frame work member, hangers /suspenders and refixing back to original position complete all as directed.

Taking down unserviceable ceiling boards from existing false ceiling and replacing with serviceable ceiling boards complete all as directed. Note: Serviceable ceiling board obtained from item No 126 shall be used against this item.

saradhi construction combines

M/s K Venkateswara Rao

EXELLENT POWER CORPORATION