Fabrication of Sliding gate and allied works to Xen quarter at MED complex Srinagar

Amount

Providing and fixing of M.S vertical angle iron posts , horizontal supports on top and bottom of vertical posts of size 50mmx50mm x5mm and M.S flates 50mmx4mm dully welded with each other as per directions of engineer in charge including cost and carriage of materials complete. The job further includes and also applying a priming coat of approved steel primer all complete. vertical posts =58 no 58x 2.24’=130 ft = 40 [email protected] kg/m152 kg Horizontal angle Length of all sides=596 ft =181m @3.8kg/m=689 kg No. of cross members = 30 no. Length of each cross posts to be used alternately=4 ft 4’x30 =120 [email protected]/m=137 kg M.S flat 50x5mm =596 Rft=181 [email protected]/m=363kg

Providing and fixing G.I. chain link MS fabric fencing of 1.5 mt width of size 10mm gauge in mesh size 50x50 mm, chain link fixed to angle iron Post of size 50*50*5mm with supplying struts of angle iron of size 50*50*5 at every 5th post or as required at corner/end post and struts embedded in concrete of size as per drawing and providing 50*5mm thick MS flat at top, bottom & Cross with making holes in angle post and fixing GI U/J hooks of chain link fencing between the vertical angle post including 6mm dia. GI J hook, bolt, nuts & washer at 200mm c/c.8mm dia. MS rod fixing for every vertical post including scaffolding stretching, straighting etc including strengthening with 2 mm dia. wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia. not less than 5 mm in required colour and shade. (Concrete Post & Angle Post, Struts, MS Flat to be paid separately under relevant items). The job including cost of cost and carriage of materials complete

Design, Fabrication, Supply, Installation, Testing and Commissioning of Single leaf Manually operated Sliding gate suitable for a clear opening of 3.3 mtrs clear width and 2.3 mtr clear height, over all width of 4.5 mtr min as per following specifications suitable for movement on track of MS Solid bright bar fixed on C channel i/c complete civil works for installation of gates and all associated works etc. complete as required. a. Outer main frame wil+B15l be M.S rectangular/square section of size 100X100X3.0 mm thickness. b. Vertical and horizontal support pipe will be M.S rectangular section of size 100X50X3.0 mm thickness. c.Cross supports for wheel will be of M.S rectangular section with suitable size and thickenss. d. Top supports will be M.S rectangular section of suitable size . e. M.S wheels of 125 mm dia/suitable size and design with double ball bearing, self lubricated bearings (Make SKF/NBC) f. Shaft of wheels and bracket as per site requirement g. Coupling arrangement as required at site. h. Double railing of suitable size with hole fast and 25 mm dia solid bright bar. i) Verticle Support Piller MS 100mm 4mm thick square hollow pipe with footing of MS plate 6mm thick j. Gate shall be fabricated as per the specifications and Painting with one coat of epoxy primer and two coatsof polyurethane spray paint of approved colour and make etc.. complete as required. k. M.S angle of size 50X50X5 SWG in M.S U channel of size 100mmX50mmX5 SEG i/c cutting of bituminous/concrete road, fixing of track with concrete and making good the same as per site condition including cost of Civil Work . ( Approx Weight 680 Kg )

JAVAID AHMAD BHAT

Elevate Engineers

M/S NAZIR ENGINEERING WORKS

M/S MOHD HANIEF WANI