NIT-18 of 2020-21 CERTAIN REPAIRS TO TILING, BRICK WORK, JOINERY, PLUMBING WORK, CEILING, ROOFING, PANELLING AND MISC REPAIRS AT CHINTA, DUGGA, NASKA AND JAI AREA AT BHALRA MIL STN UNDER GE (I) 873 EWS.

Amount

B/R Portion

Demolition of brick work masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete, but except brick, i.e. using serviceable bricks obtained from demolition, complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position complete and removing rubbish from the site, complete all as specified and directed.

Precast cement concrete 1:2:4 (nominal mix), type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manhole etc.), and similar articals with plain faces, set in cement mortar 1:4 complete all as specified & directed.

TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar including removal of debries outside cantt area, complete all as specified and as directed.

Vitrified coloured tiles, light shadeof size 596mm x 596mm x 9 to 10mm thick as in floors etc. bedded & jointed in neat cement slurry over and including 15mm thick screed bed in cement mortar 1:4 and pointed in coloured cement to match the colour of tile all as specified and directed.

Non-skid coloured glazed ceramic jointless tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 300mm x 300mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 350mm x 250mm x 7mm / 450mm x 350mm x 7mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

16mm to 18mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Mild steel rolled work as in doors or gates or study tables of angle or other section with gusset plates, rails, braces, eaves board etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. Note : The door frame shall be fixed in wall with PCC 1:2:4 type B-1 all as directed at site and the cost of the same shall be deemed to be included in quoted rate against the above item.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.00 Sqm each, complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, complete all as specified and as directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 125mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 No's of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge, complete all as specified and directed.

PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frames and in bed block for holdfast etc. similar work etc. complete all as specified and directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b), complete all as specified and as directed.

Aluminium anodised, powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified, complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.

Factory made solid panel PVC door / cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 150mm long complete all as specified and directed.

Aluminium handle cast type anodized of size 150mm complete all as specified and directed.

Hasp and staple, size 100 mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hinge plate and fixed with screws, fixed in repairs, complete all as specified and as directed.

150mm size (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in repairs in floor, complete all as specified and as directed.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, fixed in repairs, complete all as specified & directed.

Fancy type curtain rod 20 mm dia powder coated fixed to brackets complete all as specified and directed.

Mild Steel Brackets powder coated for holding drapery rods fixed with screws to walls all as specified and directed.

Fancy dome type corner ends fixed to drapery rods 20mm dia all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

4mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Mild steel steel wire cloth 0.56 mm nominal dia of wire and aperture 1.18mm and fixed with tinned tacks or galvanized wire staple all as specified and directed at site

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Refxing of serviceable Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour as in roof covering, fixed with self taping screws, complete all as specified and directed.

Self tapping screws 75mm long for fixing to old existing Pre-painted galvalume aluminium zinc coated sheets as in roof covering / cladding to walls, in buildings upto double storey height including all necessary scaffolding and safety arrangement complete all as specified and as directed.

Preparation of roof surfcaes by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and roughening old concrete roof surfaces and applying cement slurry @ 3.0 Kg of cement per Sqm and applying the following Roof Treatment complete all as directed :- (a) Applying 1st course of 10mm thick screed bed with cement mortar 1:3 over concrete surface. (b) Applying 2nd course of bituminous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (c) Applying 3rd course of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

(d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric membrane 3mm thick weight not less than 3.6 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. (f) Applying two coats of aluminium paint over APP membrane complete all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

6mm thick non asbestos fibre cement building boards laid / inserted to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40mm x 30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and scrwed at 450mm centre to centre / intermediate channel 0.9mm thick having two equal

flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.20 metre length) of 0.55 mm thickness having kurled web of 50mm and flanged of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

PVC panelling made up of PVC hollow panels 25 / 30 cm in width and 10mm thickness, interlocking pattern, of approved shape and design, fixed in repairs to walls or ceilings all as per the manufacturer's instructions, complete all as specified and as directed.

Prelaminated particle board, 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to iron frame work etc.all as specified and directed.

2nd class softwood plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face, sectional area exceeding 03 Sqcm but not exceeding 06 Sqcm complete all as specified and as directed.

Dismantling water tanks of any description capacity 250 litres, complete all as specified and directed.

Dismantling water tanks of any description exceeding 500 litres capacity but not exceeding 1000 litres, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 250 litre capacity complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 210gms), complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 20mm dia complete all as specified and as directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 15mm dia bore iron pipe, fixed in repairs, complete all as specified and as directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 20mm dia bore iron pipe, fixed in repairs, complete all as specified and as directed.

Bib tap cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Stop valve CP, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Stop valve CP, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 20mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Brass CP wall mixer, fancy type, with connector for hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower, fixed to 15mm dia pipe, complete all as specified and as directed. Make : Jaquar Cat Part No CON-271KN or equivalent in Ess Ess / Koheler / Marc

Angle stop cock with wall flange, cast copper alloy, fancy type, screwed down high pressure with capstan head fly handle, screwed with ends for iron pipe or unions of 15mm, fixed in repair, complete all as specified and directed. Make : JAQUAR Cat Part No CON-059KN or equivalent in Ess Ess / Koheler / Marc

Chromium plated health faucet including CP flexible pipe for EWC all as specified and and as directed. Make : Jaquar Cat Part No ALD-CHR-593N or equivalent in Ess Ess / Koheler / Marc

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

05 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) size 625mm x 365mm x 700mm with flushing cistern, snow white colour, including ‘P’ trap and soft close seat cover, complete all as specified and directed. Make : Cera 'Cruse' - WC Cat Part No S1031134, Cistern Cat Part No S1060106, Seat Cover Cat part No B1520110 or equivalent in Hindware / Parryware / Neycer

Vitreous china table bottom wash hand basin 560mm x 470mm, snow white colour, including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, complete, fixed in repair, all as specified and as directed. Make : Cera Cat Part No 'OVAL' S2030104 or equivalent in Hindware / Parryware / Neycer

PVC connection 45cm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed.

Bottle trap of PTMT having minimum water supply seal of 25mmm, suitable for discharge pipe of 32mm bore (minimum weight 260 grams), fixed in repairs, complete all as specified and directed.

Toilet Paper Holder, fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1151N or equivalent in Hindware / Parryware / Neycer

Soap dish, fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1131N or equivalent in Hindware / Parryware / Neycer

Towel Rack with lower hanger, fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No AHS-1581H or equivalent in Hindware / Parryware / Neycer

Corner Glass Shelf assembly (with bracket), fancy type, fixed in repairs, complete all as specified & directed. Make : Jaquar Cat Part No ACN-1173 or equivalent in Hindware / Parryware / Neycer

Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges, 100mm dia made out of 1mm thick sheet, complete all as specified and as directed.

Cast iron rainwater socketed pipes with cement joints, without ears, complete all as specified and directed.

Cast iron Bends or elbows square, or obtuse suitable for 100mm dia CI rain water pipe, complete all as specified and directed.

Preparation new plastered or previously untreated surfaces of walls and applying three coats of white wash , complete all as specified and directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of cement primer complete all as specified and directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

m/s vaid contractor and builders

VEER TRADERS

Girdhari lal parihar

VARDHMAN INTERNATIONAL

Bidder Name

m/s vaid contractor and builders

VARDHMAN INTERNATIONAL

VEER TRADERS

Girdhari lal parihar

M/S KOTWAL CONSTRUCTIONS