Construction of boundary wall, footpath and platform in Park of Chaman Garden, Ward no.12, M.C. Karnal.

Amount

Providing, designing and fixing of Air-Walker of size 100 x 550 x 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness U V resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters . The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.-According N.S. item.

Providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. -According N.S. item.

Providing, designing and fixing of airs winging pair of size 1150 x900 x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintained free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc -According N.S. item.

Providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc-According N.S. item.

Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000 x 800 x 1400 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc-According N.S. item.

Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.-According N.S. item.

Providing, designing and fixing of Pull chair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.-According N.S. item.

Providing, designing and fixing Exercising Bar of Pull pair of size 1800 X 550 X 1700 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.-According N.S. item

Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.-According N.S. item

Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.-According N.S. item

Providing, designing and fixing Elliptical Exerciser of size 1200 X 540 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.-According N.S. item

Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.-According N.S. item

Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.-According N.S. item

Providing, designing and fixing Rowing Machine of size 1280 X 800 X 1500 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment.-According N.S. item

P/L of precast concrete reinforced benches (Chair type) with back rest manufactured by using M-30 Grade of concrete & reinforced suitable to prevent damaged during handling, transportation, execution and long use. The bench consist of 2 no's L-shape base sport in grey/cement colour of thickness 100mm, back high 1000mm & grey/cement colour of thickness of 100mm, back high 1000mm & frount high 450mm, base with 620mm & 5 no's reinforced concrete planks in red colour size 1500 x 100 x 50mm & 1 no. of reinforced concrete plank of size 1500 x 200 x 50mm. All parks jointed together with galvanized, nuts & bolts of suitable size. All bolts are silled after assembled. Seating length of Bench = 1500mm Seating height of Bench = 450mm Seating back height of bench = 1000mm.-According N.S. item

P/f hut 14' x 14' & 8' above ground level and 2' below ground level made of 4'' M.S. Plate 9'' x 9'' x 8mm & M.S.Pipe 1.5' (16 Bg), 1'' x 1'' (16 Bg) and on the top of M.S. Seat ridge of 20 guage. The M.S. Pipe 4'' dia grouted with C.C.1:2:4 in column included stel and Kota stone florring 25mm thick to be laid on C.C. 1:8:16 in between toe wall and skirting 6'' around flooring and edge molding of 4 sides of flooring and complete hut except ceiling of corrugated sheet is to be painted with special quality paint of 1 coat of primer complete as per drawing and analysis of rates and to the entire satifaction of Engineer-in-charge. .-According N.S. item

Providiing and fixing of 4 seater See Saw is fabricated on 2” MS Pipes with T handles on either side. The board is of 8ft long with FRP seats fitted to the top pipe. The top pipe is fitted to the frame structure of 2”connected with MS Plate to the top. One central support is also provided between two boards see-saw base pipe shall be 3mm thick galvanized Pipe which is Thorough Process Powder coat . The dimension of the see saw is 96inch length and the height 21inch from ground level. The seat is made up FRP Kathi shapes, Complete in all respect to the satisfaction of Engineer-in-Charge. (Including all Taxes).-According N.S. item

P/F of Six Seater MGR, 5 feet (approx) dia made out of FRP 6 seats & legs made of iron structure (Merri Go Round). Also the foundation is done as per ISI standard. Capacity : 6 Children Main Frame : MS Seats : FRP with cover pipe railing All welded joints should be grined well and filled with filler, Complete in all respect, Engineer-in-charge. .-According N.S. item

Providing and Fixing of Two seater Arc Swing 2.4 meter high ground level consisting of top bar of swing made by 80nb MS Pipes and 2nos.chain should be minimum 6mm thick electro galvanized tested with in built 2 nos. for safe and comfortable swing. Antiskid chequered reinforced FRP belt should be Heavy duty only. All parts to be treated with pure polyster powder coating (oven baked) with minimum thickness of 40 microns done on the pipe extend the life of equipment .The finish shall be electro statically applied finished and proper fixed in Cement Concrete Block of Size 30 X 30 X 45 cm of concrete mix 1:1.5:3 as per the direction of EIC. Complete in all respect to the satisfaction of Engineer-in-Charge. (Including all Taxes).-According N.S. item

Providing and Fixing of Multi Activity Play System Sq Deck 3'Hight with tile canopy = 1 No. Sq Deck 3'Hight = 2 No's Sq Deck 5'Hight with tile canopy = 1 No. Sq Deck 5'Hight = 1 No. Spiral slide 5'Hight with railling = 1 No. Vertical loop climber 5'Hight = 1 No. Maps snack climber 5'Hight = 1 No's Roto Railing = 6 No's FRP bridhe 8'Long = 1 No. Mini wave slide with slide hight 5' = 1 No. Double wave slide with slide hight 5'= 1 No. Entry hight 5'= 1 No. FRP stair case 3'Hight with railing = 1 No. Swinging bridge 8' long with railing = 1 No. Split level ladder =1 No.-According N.S. item

Providing and Fixing of Jungle Gymnasium.-According N.S. item

Granite stone for Gate -According N.S. item

Supply and erection of MS Enclosure suitable for erection of 100 amp. to 220 amp. 3 phase moulded case circuit breakers in existing pedestal including bonding to earth and necessary connections. According to N.S. item.

Supply and Erection of cosmic bollard (LED PT Module) TLS-B 172R (H-980mm) are made of extruded aluminum profile with cast aluminum base combination of PC rings and die cast aluminum lovers suitable for 22 watt retrofit of twinkle/crompton/phillips make with 1:2:4 C.Conc. Block of size 0.3x0.3x0.46 mtr below ground level and 0.23 mtr above ground level including the cost of PVC pipe, with 22W led make amsung/cree/osram and fitting should be make of winkle/crompton/phillips with three guarantee period and petty material required to complete the job complete in all respect incuding necessary connections upto the entire satisfaction of engineer in-charge. Drawing of cosmic bollard is to be up loaded. According to N.S item.

NS 180 watt Flood light :- Supply of LED based flood light and it must be posses the following minimum specification :- 1.Input voltage:- 90-270 V, AC standred with cut off at 300v with automatic on provision. for protection from surge high voltage the provision of auto shut down should be provided.2.Input Frequency:- Input Frequency =50 Hz + 3%,3. Power factor :- (>0.95).,4.Working Humidity:-10% to 90% RH,5.Working temperature:- -10°C to (+) 50°C),6. Luminary efficiency:- ≥100 lumen/watt as per LM79 data from certified third party testing facility like NABL approved lab/UL Lab.7.Optics-Lens Material/Make of lens:- High impact polycarbonate (PMMA)/Cathode, Ledlink, Ledil.8.Luminary Housing:- power pressure die cast aluminium housing with ADC 12 Or LM6 alloy and toughened glass cover.9.Screws, Fasteners & Clamping material:- Stainless steel Grade – 304.10.Surge / Spike Protection:- 4 KV (internal) and 10 KV using external certified surge protector,11.Make of LED:- Lumileds / ree/Osram/Nichea/Samsung/Seoul or any other equivalent.12.Color Temperature:- 5500-6500K,13. Color rendering index:- ≥ 70 14.Life expectancy of the project (LEDs):- Minimum 50000 hrs. with minimum 70% lumen output L70 data to be produced for LEDs and LM79 for Luminaries.15.LED Printed Circuit Board:- Metal Core Printed Circuit Board. Thermal Conductivity ≥ 2W/MK,16.Class of Power Supply:- Class II, LVLE input output isolations (Max 100 VA output),17.THD:- ≤ 10%,18.Uplight:- Zero Uplight as per LM79 report from NABL/Lighting Facts/accredited third party testing facility.19. Photomtry :- LM79 Report from NABL/Lighting Facts accredited lab for all variants.20.Lumen depreciation (L-70) :- ≥ 50,000 hours (as per TM21 using L80 data & INSITU data by LED manufacture LM 80 report).21.Ingress Protection:- IP65/IP66 as per IEC 60598/IEC 60529 from NABL accredited lab for all LED.22.Conducted Emission and Radiation:- Emission test report from NABL accredited lab conforming limits complying with IEC 61000.,23.Driver Test:- As per BIS,24.Wattage Variation:- ±10%,25.Wattage of LED:- 1-3 watt,26.Pole entry dia :- Should be suitable for mounting of 30 to 56mm outer diameter poles with locking bolts / should provide with complete bracket with locking bolt.,27.LED drive current:- <1000mA,28.Beam angle:- 80° / 135° with lens,29.Safety Test:- As per IEC 61347 – 2 - 13,30.LED lights fittings should have approval from PWD Department haryana/Municipal Corporation Haryana/HAREDA such as bajaj/ crompton/ GE/ phillips/ wipro/ mayfair/ surya roshni/ HPL/ halonix/ insta power/ hevells/ ecolight/ C&S elctric polycab/ SE-sangwan energy, legero etc.,31.LED light fitting will provide a on site Guarantee/Warranty certificate applicable for minimum five(5) years from the date of commissioning of LED lights fitting.. According to N.S item.

Supply, installation, Testing and commissioning of 12.5 Mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 Nos. Luminaire loading fully motorized with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED type including suitable RCC (M-20) foundation as pre standard design recommended by manufacture taking soil bearing capacity 10 ton wind speed 180 Km per hour including shuttering, bar binding fixing of foundation bolts refilling the etc. to complete the job in all respect upto entire satisfaction of Engineer-in-Charge of the work. And it should be make of crompton/ bajaj/GE Thickness of Top Section = 3mm (Minimum) Bottom Section =3mm (Minimum) Top Dia = 150mm Bottom Dia = 360mm Thickness of Galvanization = Top = 65micron (Min.) Bottom = 85micron (Min.) Note:-No access rate will be paid on Non Schedules Items as taken in the BOQ/Estimates.. According to N.S item.

Main switches Supply, erection and commissioning of Digital time switch Make havells/ indo-asian make 110-240 VAC 1 C/O BASE/DIN 25 ON/OFF According to N.S. item

C.C. roads/pavements using micro tranching method including al pity material required for work. NS item

Along with 3 pole power contactors 110 amp., AC3 Rating (A) 110, aux. Contacts (2NO+2NC), Make havells/ indo-asian make switch gear) in pedestal at along with wiring contacts and programming of time switch to control street light ON-OFF . Time to be set as directed by Engineer in-charge of the work.According to N.S item.

Along with 3 pole power contactors type MNX 32 size: Fr2, AC3 Rating (A) 32, aux. Contacts (2NO+2NC), Cat. No. CS94111 (Make L&T make switch gear) in pedestal at along with wiring contacts and programming of time switch to control street light ON-OFF . Time to be set as directed by Engineer in-charge of the work..According to N.S item.

Supply and Erection of wire casing made of 1"x1"x1/8" A.l. frame and welded with 1.25" square M.S jali with 6" long legs fixed in ground with cement concrete mixture, duly painted with green or white paint as required. The size of casing is 1'x1'x3'-6" to cover with CC base of size 2'-6" high(1'-6" above G.L. & 1' below GL) and 12" squire duly plastered with 12.5 mm thick cement and mortar fitted with 16 GMS junction box of size 10"x7"x4" with lock upto the entire satisfaction of engineeer-in-charge. According to N.S item.

Providing and fixing of Cat eye size 90 mmX110 mmX 17 mm in different colour Make 3M 290 series in Yellow, White and Red.- According N.S. item.

Providing and fixing of solar Road stud Aluminium Alloy poly cabonate size of 125X125X20mm DARK EYE MAKE with 6 LED stem - According N.S. item.

Bidder Name

Amount

Parveen Contractor

M/S Singla Construction Co.

Parveen Contractor

M/S Singla Construction Co.