SPECIAL REPAIR TO BLDG NO P141 PERS LINE OF BASE HOSPITAL UNDER GE GUWAHATI

Amount

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each leaf all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm including hold fasts and PCC block & removing rubbish from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm in each (without taking off shutters from the frame) including hold fasts and PCC block & removing rubbish from site complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris from site of work complete all as directed by the Engineer-in-Charge.

Demolition of plain cement concrete (Un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and removing debris from site of work complete all as directed by the Engineer-in-Charge.

M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in cement mortar (1:6) and complete all as specified and as directed.

S&F for glazed ceramic tiles coloured in vertical surfaces,350x250x7mm/450x300x7mm thick, set and jointed in neat cement slurry and pointed in white and colour cement to match and including 10 mm thick backing in cement sand mortar 1:4 complete as specified and directed.

M&L for Non-Skid Ceramic coloured tiles 8 to 9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for 18 to 20mm thick machine cut and polished kota stone slab flooring laid over and including 15 mm thick cement screed bed in CM 1:4 and jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed

M & L for Marble tiles white or of any other approved shade 16 to 18mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing laid over and including 15 mm thick cement screed bed in CM 1:4 complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete

M&L for plain cement concrete (1:3:6) type C2 (using crushed stone aggregate) as in surface channel/drain complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type C 2, 1:3:6 (using 40 stone aggregate) in plinth protection, finished even and smooth without using extra cement, including provision of joints and filling the same with bitumen mastic complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof or wall covering complete all as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated /semi corrugated steel sheet 0.5 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/eaves boarding etc fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed.

Providing & fixing false ceiling of Designer tile Ivory painted Non asbestos fibre cement board (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel section (Galvanized @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instructions/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engr-in-Charge.

M&L for preparation of new wood or wood base surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc primer complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water and removing debris from site of work complete all as directed by the Engineer-in-Charge.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of exterior emulsion paint (1st quality of approved make ) over a coat of suitable primer (as per manufacturer recommendation) over white cement based wall care putty (minimum1.5mm thick) complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old wood or wood base surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of cement primer over white cement based wall care putty (minimum1.5mm thick) complete all as specified and as directed .

M&L for preparation of old plastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of cement primer complete all as specified and as directed .

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of cement primer over white cement based wall care putty (minimum1.5mm thick) complete all as specified and as directed .

M&L for preparing new plastered surfaces of walls and applying two coats of exterior emulsion paint (1st quality of approved make ) over a coat of suitable primer (as per manufacturer recommendation) over white cement based wall care putty (minimum1.5mm thick) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads and removing rubbish off the premises complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane.

Demolition of brick/stone masonry work built in cement mortar as in wall including all quoins, arches, pillars etc and removing debris from site of work complete all as directed by the Engineer-in-Charge.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Demolition of cement concrete reinforced of any description and in any position not other wise specifically provided and removing debris from site of work complete all as directed by the Engineer-in-Charge.

M&L for Pre cast RCC (1:1.5:3) type A-I (using 20 mm graded broken stone aggregate ) as in manhole cover slab etc and set in CM (1:4) including use of forms, moulds or machine mould and setting complete all as directed

M & L for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

M&L 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick flush shutter, solid core construction with particle board core and plywood face panel with decorative face veneer on both faces with lipping to match complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

M & L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing

S&F cold rolled mild steel butt hinges 100 mm long medium weight complete all as specified and as directed.

S&F butt hinges 100mm size, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type B-21 and fix complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed

S&F MS FI 25x3mm as in hold fasts etc conforming to Fe-290 Gde- E-165 complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in hold fast block or bed block complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminium wire staples complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminium wire staples complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames / shutters for doors/windows/ventilators and partitions with extruded built up standard sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including making provision for fixing of fittings wherever required including the cost of other required fittings etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P.brass/stainless steel screws, all complete as per the directions of Engineer-in-charge. (Notes:- 1. The weight shall be of all aluminium components and fittings except the gaskets. 2. Glazing, wire mesh and panelling to be paid for separately and all other fittings shall be deemed to be included in the rate quoted.)

S&F 5.5 mm thick sheet glass ordinary quality, fixed to aluminium shutter with rubber gasket fittings complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality, fixed to aluminium shutter with rubber gasket fittings complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting / box type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded including taking down old window complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting / box type hinges with steel handle, and steel peg stay, complete without glazing bars dovetailed or welded including taking down old window complete all as specified and as directed.

Taking up or down 15mm bore GI tubing and connections including cleaning for re-fixing or removal to store complete all as specified and as directed

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases for concealed water tubing etc not exceeding 10 cm width or girth in brick walls and making good in cement mortar 1:3 complete all as specified and as directed

Taking up or down 20 mm bore GI tubing and connections including cleaning for re-fixing or removal to store complete all as specified and as directed

S&F GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in repair 20 mm dia gun metal gate valves, with iron wheel head screwed both ends complete all as specified and as directed.

S&F in repair Bib taps 15mm dia cast copper alloy chromium plated with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as directed.

S&F in repair angle stop cock 15 mm bore, cast copper alloy, chromium plated with round operating knob screwed down for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated screwed for 15 mm bore complete all as specified and as directed.

S&F in repair 15mm dia PVC connection pipe 450 mm with PTMT nuts complete all as specified and as directed.

S&F in repair stop valve, fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) screwed down for 15 mm bore pipe complete all as specified and as directed.

S&F in repair 125 mm dia chromium plated swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

S&F in repair 20 mm dia towel rail 600mm long, chromium plated, fixed to wall with chromium plated brass screws and plastic cleats complete all as specified and directed.

Dismantling PVC drain pipes any size and in any position including all fittings complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S&F 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm dia PVC (SWR) junction single , (single T) equal or unequal provided with access door complete all as specified and as directed.

Dismantling PVC/cement water tank exceeding 500 litre but not exceeding 1000 litre capacity complete all as specified and as directed.

S & F 1000 litres capacity triple layer, rotational moulded, polythene (white colour), triple layer water storage tank (Cylindrical vertical with closed top) colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

S & F in repair Vitreous china squatting pan of pattern Orissa Pattern of size 580x 440 mm white with 110mm bore PVC ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( 1:5:10, using 40 mm graded stone aggregates), and finishing the top surfaces to match with the existing flooring complete all as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as specified and as directed.

S & F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 600mm length with PTMT nuts complete all as specified and as directed by Engineer-in-Charge.'

S&F in repair vitreous china, urinal half stall type white and union for discharge pipe including providing of PVC waste pipe and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S & F in repair PVC Cistern valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including, PVC connection 15mm size with PTMT nuts and provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge as in repairs.

S&F in repair 100mm dia grating doom of PTMT with minimum weight 25 grams complete all as specified and as directed.

Material and labour for preparation of surface of wood or wood based materials, steel and iron works new or old of any description and girth not otherwise described and treating ends of posts, back of chowkats, etc. and area tarred exc. 0.1sqm but not exc. 0.5sqm each with tar or coal tar black paint complete all as specified and directed.

Material and labour for preparation of treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area not exceeding 0.1 sqm each with tar or coal tar black paint complete all as specified and directed.

Taking down carefully old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

Taking down carefully MCB DBs SP/TP by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.

M&L for point wiring for modular fittings with 1.5 Sqmm (nominal area) PVC insulated1100 volts grade, multistranded, copper conductor, single core, unsheathed cables (FRLS quality) drawn through and including PVC conduits of suitable size but not less than 20 mm dia (medium grade) with all fittings and accessories concealed in walls/ceiling etc including cutting chases for conduits and sinking for boxes and making good to disturbed surfaces including MS powder coated terminal box, frame with innter and outer cover plate suitable for modular fittings including PVC insulated and unsheathed, single core, multi-stranded, copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light point / fan point controlled by one 5 Amps one way switch complete as specified and directed. Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

All as per serial item No. 93 above but for one light point controlled by two way switch complete all as specified and directed.

All as per serial item No. 93 above but for one 3 pin socket outlet point, 5 Amps on independent board complete all as specified and directed.

All as per serial item No. 93 above but for one 3 pin socket outlet point, 5 Amps control by one switch on same board with other switches complete all as specified and directed.

All as per item No 93 here-in-before but point wiring for one 3/5 pin 15 Amps socket point on independent board with 4 Sqmm size PVC insulated, unsheathed, multi stranded, FRLSH copper conductor cables and with 4 Sqmm PVC insulated unsheathed, single core, multistranded FRLSH copper conductor cable as earth wire complete as specified and directed.

Material & labour for concealed sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC conduits of suitable size but not less than 20 mm dia (medium grade) with all fittings and accessories concealed in walls/ceiling etc including cutting chases for conduits with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standard copper conductor of size 6 Sqmm as earth wire (green in colour) and connected common earth dolly including taking out the old sub main wiring . Note : (a) Two run of 6 Sqmm cable one run of pvc conduit pipe and one run of 6 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one unit. (b) Quoted rate shall be inclusive for necessary chasing and cutting and making good .

Material & labour for concealed sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC conduits of suitable size but not less than 20 mm dia (medium grade) with all fittings and accessories concealed in walls/ceiling etc including cutting chases for conduits with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standard copper conductor of size 4 Sqmm as earth wire (green in colour) and connected common earth dolly including taking out the old sub main wiring . Note : (a) Two run of 4 Sqmm cable one run of pvc conduit pipe and one run of 4 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one unit. (b) Quoted rate shall be inclusive for necessary chasing and cutting and making good .

Supply and fixing LED fitting 1x18 watts ( minimum) including Tube rod, 230 Volts, bipin holders connector block etc. complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. Make : Cat Part No: Bajaj Batten 112181 Batten for LED TUBE LIGHT fitting BLRB- DB 118. Bajaj Tube rod No BLRB-18 Watt CWc XE (112753) or Havells Cat Part No: REGALBATTENT5UPTO1X18WDSBSWH for batten and TITANIANEO1213T8SSTL18WLED865SPC for tube light or crompton , batten model-ECO DIJB12LT8-20, tube -ultronlt8-20-865-(20 .

S & F wall mounted LED batten fittings with all accessories 1X 10 Watt LED 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed Make : Cat Part No: Philips Astra Line Scene Switch HSN Code- 94021090 or Havells Cat Part No: ENDURALINEARNEOBS10WLED830SPCWH or Crompton TRIMLINE LDL-10 WW .

S & F 10 W LED bulkhead light fittings with LED , IP-65 protection and IK09 impact resistant suitable for surface/wall mounted complete with connection with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Cat Part No: Crompton Sud Bulk Head Cat Part No -LBHP-10-CDL or Havells Cat Part No: HEXAFT10WLED857SSYMBOPC or SURYA Cat No SLE BLH 10 W PLUS .

Supply and fixing of modular switch one way 6 amps 1 module 230/250 Volts complete all as specified/directed.

Supply and fixing of modular switch two way 6 amps 1 module 230/250Volts complete all as specified/directed.

Supply and fixing of modular socket outlet 2/3 pin 6 Amps 230/250 volts 2 module complete all as specified/ directed.

Supply and fixing of modular socket 6/16 Amps, 230/250 volts, 2/3 pin combined, 2 module complete all as specified and directed.

Supply and fixing of modular switch one way 16 amps 1 module 230/250 Volts complete all as specified/directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

S&F Modular fan step regulator,120W,2 Module A/C 240 Volts complete all as specified/directed.

Supply and fix of MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. (Note : 1. MCB SP/TPN shall be measured and paid separately under appropriate items of this schedule . 2. Copper thimble shall be used for connection of cable. ).Make :- Legrand / Schneider/ABB/Siemens/L&T

S&F of Single pole & neutral DB 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as directed. Make :- Legrand / Schneider/ABB/Siemens/L&T

S&F of Single pole & neutral DB 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as directed. Make :- Legrand / Schneider/ABB/Siemens/L&T

Supply and fix MCCB four pole, 125 Amps, 16 kA rupturing capacity 415 Volts complete all as specified and directed. Make :- Legrand / Schneider/ABB/Siemens/L&T

Supply and fix MCB SPN, 240 Volts, 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Make :- Legrand / Schneider/ABB/Siemens/L&T

Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity 'C' series fixed in DB's. Make :- Legrand / Schneider/ABB/Siemens/L&T

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

S & F test point terminal block made of gun metal or phosphorus bronze of size 75 x 75x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal headed screws complete all as specified and directed.

S&F for 25 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 32 mm 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles including taking down old one complete all as specified and directed.

Supply and fixing LED security Building light LED 20/25 Watt (minimum) , pressure die cast aluminium housing, heat resistant glass, better optics for uniform distribution complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light including taking down old one complete. Make:- Bajaj Cat part No- 169821 LED or CG as per cat No LSTO 25 CDL or Philips Model Greenline smart BRP 022 LED 20 CW MR S1 PSU GR or Havells .ENDURAPEARLSL25WLED757SASYTOPC

M/S KAMAKHYA CONSTRUCTION AND BUILDERS

PRITHWI BUILDERS

M/S K Nath and co

M/S PRADYUT ENTERPRISE