Repair maintenance and painting

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc . complete

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement :4 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/litre of approved brand and manufacture to give and even shade: Old work (one or more coats

Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work 100 mm diameter pipes

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

Finishing walls with Acrylic smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing and fixing stone slab with table rubbed, dges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of propriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size ) as per direction of Engineer-in–Charge and finished smooth. Granite stone of approved shade

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 course sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade compete.

Providing and laying ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer ) of Ist quality conforming to IS : 15622 of approved make in colour such as white, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 )1 Cement : 4 coarse sand )’ Jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with shite cement and matching pigment etc. Complete.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part-I) decorative type, core of block board construction with frame of Ist class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked stainless steel butt hinges with necessary screws

Providing and fixing aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etc complete : 300x16 mm each

Providing and fixing aluminum tower bolts, ISI marked anodized coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200x10mm each

Providing and fixing aluminum handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm

Providing and fixing aluminum hanging floor door stopper , ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Twin rubber stopper

Providing and fixing ISI marked aluminum butt hinges, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Size 125x75x4mm

Providing and fixing 8 mm dia C.P/S.S Jet with flexile tube upto 1 meter long with S.S triangular plate to Eureopean type W.C of quality anhd make as approved by Engineer-in-charge. Each

Providing and fixing uplasticised PVC connection pipe with brass unions: 15 mm nominal bore each

Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore each

Providing and fixing C.P brash angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore each

Providing and fixing round led down light 15 W with necessary screws etc. natural white (for plan surface slab)

Providing and fixing led batten light 24 W with necessary screws etc. natural white

Providing and fixing of high speed 3 blade black exhaust fan size 230x230mm with necessary screws etc.

NIVYA CONSTRUCTION