Providing, installation, testing and commissioning of electro-mechanical machinery alongwith allied works at WSS Gandala

Amount

STAGE-0 PUMP ROOM (ANIA SPRING) TO BALDAN

Providing, installation, testing and commissioning of 3500 GPH x 180 meter head HC pump set coupled with suitable rating prime mover (in compliance with the technical conditions) and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size 6’x3’x4’ by using TMT steel bar of 10mm dia for steel mesh. The foundation block as per size of pump set should have additional margin of 6” on all sides. The foundation block may be combined for all the pumps which must include space on all sides of pump set and space between the pump sets. Providing, fabrication and laying of 80mm dia MS suction pipe line to the pump set of length as per site conditions including 80mm dia MS bends, MS flanges, MS expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 80mm dia Cast Iron sluice valve-1no., and / or foot valve-1no., gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of delivery pipe line of 65mm dia alongwith providing and fitting of MS pipe, bends, MS expanders / reducers / MS dismantling joints / MS saddles, MS flanges, cast steel NRV 65mm and sluice valve 65mm dia (Class 300) alongwith providing and fitting of nuts, bolts, washers, gaskets, flanges etc. Job includes providing and fabrication of bypass arrangement across in and out side of NRV. Job includes providing / fitting and laying of single core multi-strand copper cable 25mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 35mm2 copper cable approximately 30 meters in length single core multi-strand upto MCCB and further upto voltage stabilizer conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 100 ampere MCCB of 50KA breaking strength. . Proper earthing of equipment should be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles and material handling equipment etc.

Making of connection of sump outlet pipe with suction lines through 100mm dia MS pipe manifold. Making of connection of delivery lines with common rising main through 100mm dia MS pipe manifold. Job further includes providing and fitting of bus bar arrangement on the walls of the pump room. Job includes providing, laying and fixing of insulation rubber mats on the floor of the pump house around electro mechanical machinery. Job includes providing and fitting of overhead MS girder of required size so as to sustain the load of material / equipment / machinery while lifting / shifting of the material / equipments / machinery alongwith 03 tonnes manually operated chain pulley block at pumping station. Job includes providing of maintenance tool kit. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.

Providing, carriage, installation, testing and commissioning of 3 phase, 63 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 14 gauge container chamber alongwith allied works at WSS Gandala. Job includes providing of 63 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 70mm2 from electric pole to main switch in four leads approximately 50 meters length of each lead and further providing and fitting of 35mm2 copper cable single core multi-strand upto voltage stabilizer complete with insulation and thimbling as per site requirement .The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles and material handling equipment etc.

Vaibhav Engineers and Technocrates

GEETA ENGINEERING MECH WORKS