Loading
Loading…
Loading…
Tender Value
₹48.6 L
EMD Value
₹97,500
Closing Date
10 Aug 2026, 6:00 pm
GE 860 EWS
GE 860 EWS PIN-913860 c/o 56 APO
PROVN OF MT VEH SHED HARD STANDING FOR B VEHILCES AT KIARI AND SPL REPAIR TO BLDG NO. TA-155/010C AND CONSTR OF TWO-SOCKAGE PIT AT KARU UNDER GE 860 EWS
2026_MES_779662_1
8175/2026-27/E8
Open Tender
Civil Works
Item Rate
270 days
KIARI AND KARU
As per tender documents
9 documents required · 9 mandatory
₹500
GE 860 EWS Karu
₹97,500
Yes
20 Jul 2026
20 Jul 2026
12 Aug 2026
20 Jul 2026
10 Aug 2026
3 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling post or struts (wood, steel or RCC) any section incl taking out embedded portion in concrete, brick work, masonry etc and making good disturbed ground complete all as specified and directed by Engr-in-Charge. | 5 | Each | - | - |
| 2 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed by Engr-in-Charge. | 53 | Each | - | - |
| 3 | M&L Cement concrete type C2 1:3:6 (40mm graded aggregate) in foundations, post hole, filling and mass concrete etc complete all as specified and directed by Engr-in-Charge. | 3.2 | Cum | - | - |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and as directed by Engr-in-charge. | 0.6 | Per Qtl | - | - |
| 5 | S&F of mild steel work in angle iron posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe – 290 Gde E -165complete all as specified and directed by Engr-in-Charge. | 200 | Kg | - | - |
| 6 | S&F Rolled MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde E-165), complete all as specified and directed. | 400 | Kg | - | - |
| 7 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc complete all as specified and directed by Engr-in-Charge. | 25 | Sqm | - | - |
| 8 | S&F Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugation side lap, fixed withL-type or J-type or cranked hook bolts and washers as in roofs, walls etc complete all as directed by Engr-in-Charge. | 20 | Sqm | - | - |
| 9 | S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), with grade of zinc coating 275 as complete all as specified and direct by Engineer-in-Charge. | 5 | Sqm | - | - |
| 10 | M & L for two coat of synthetic enamel paint of approved tint on steel and iron surfaces of any description over 10 cm width or girth not otherwise described including preparing new zinc(or galvanised) surfaces to receive painting by coating with mordant solution incl washing and cleaning, etc. over a coat of red oxide complete all as specified and directed. | 23.6 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
Tender1.pdf
Tender Documents • 0.65 MB
Tender2.pdf
Tender Documents • 1.23 MB
Tender3.pdf
Tender Documents • 0.20 MB
BOQ_873279.xls
BOQ • 0.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].