REPAIR MAINT OF ROOF SHEET AND FLOORING IN ZONE C UNDER AGE B/R-I GE(W) LUCKNOW

Amount

Dismantling Asbestos cement (corrugated or semi corrugated sheets etc) in roof covering including ridges etc complete all as specified and ditected.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and ditected.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and ditected.

M & L for 6mm thick asbestos cement, corrugated or semi corrugated sheets fixed with L-type or J- type or cranked hook bolts in roofs, walls etc complete all as specified and directed.

M & L for Asbestos cement serrated ridge for corrugated or semi corrugated sheets complete all as specified and directed.

S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Ditto all as above Item No 06 but excluding snap grid complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing coat) and rubbish off the premises complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.18sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of mortar 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.18sqm but not exceeding 0.38 sqm as in vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of mortar 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed.

Taking down shutter only of any description exc 1 sqm n. exc 2 sqm each and refixing in same opening after necessary cutting and easing complete all as specified and directed.

M & L for preparation of old steel surface of any description over 10cm width and girth and applying one coat of synthetic enamel paint over a coat of red oxide primer upto 10m height complete all as specified and directed.

Demolition of brick or stone/boulder masonry built in cement or cement lime mortar complete all as specified and directed.

M&L brick work with fly ash brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surface and finishing the surface even and fair complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for prepration of new treated surface of wall and applying three coat of white wash complete all as specified and directed.

M & L for prepration of old treated surface of wall and applying two coat of white wash complete all as specified and directed.

M & L for preparation of old treated surface of wall and applying two coat of oil bound distemper complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.inc Brushing neat cement slurry with 3.0kg of cement per sq. metrecomplete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20mm thick screed bed or bedding layer of mortar for laying floor finishes with cement mortar 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick in riser to step etc, skirting, dado, pillar laid over 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F steel work in tabular trusses including special shaped washer etc. complete using ERW or induction butt welding tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed.

abhinish traders

suniltraders

chandra kaushal supplier

M/s Bajpai Constructions

M/S Reliance Construction

M/S SWATI CONSTRUCTION

KUMAR ENTERPRISES

M/s SNS Construction

Tecj Nirmaan