REPAIR TO JOINERY, FALSE CEILING, ROOFING, WALL PANELING ETC TO MD/OTM ACCN AT AFS DINJAN UNDER GE (AF) MOHANBARI.

Amount

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed by Engineer-in-charge.

Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description n exc 1 sq.m each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or frame n.exc 1.5sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description n exc 1 sq.m each and refixing in the same opening after rescuring / easing complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and refixing in the same opening after rescuring / easing complete all as specified and directed by Engineer-in-charge.

Dismantling timber scantlings 40 sq. cm and over in section,unframed work in any position including removing of unserviceable material from work site complete all as specified and directed by Engineer-in-charge.

Material and Labour for 2nd class hard wood (well seasoned) scantling clean sawn as in unframed work etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing 35 mm thick Factory made plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I) complete all as specified and directed by Engineer-in-charge.

Material and labour 35 mm thick, IInd class HW(sal), factory made, Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. (without sash bars) ,edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc;size of members of shutters as specified in SSR part-I, Section-8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified.complete all as specified and directed by Engineer-in-charge.

Material and labour 35 mm thick, IInd class HW(sal), factory made, Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. divided into square with plain , chamfered or rounded, mitred and rebated sash bars, any numbers with edge of sash bars, forming moulded for window etc provided with stile and rails as specified in SSR part-I, Section-8, clause 8.24 (b) supplied and fitted to chowkhats complete all as specified and directed by Engineer-in-charge.

M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed including tarring back of chowkhats with tar or coal tar black paint complete all as specified and directed by Engineer-in-charge.

Supply and fixing Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-charge.

Material and labour for 125 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete all as specified and directed by Engineer-in-charge.

Material and labour for 105 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified and directed by Engineer-in-charge.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified and directed by Engineer-in-charge.

Supply and fixing for Steel ventilator with top hung shutter including hinges steel peg stay, steel handle complete including taking down existing old steel ventilator complete all as specified and directed by Engineer-in-charge.

Supply and fixing framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed by Engineer-in-charge.

Supply and fixing Galvanised steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Galvanised steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-charge.

Supply and fixing 4 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair 3 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads including hacking out old broken glass complete all as specified and directed by Engineer-in-charge.

Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification complete all as specified and directed by Engineer-in-charge.

Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed by Engineer-in-charge.

Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed by Engineer-in-charge.

Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified and directed by Engineer-in-charge.

Supply and Fixing aluminium handle cast type anodised 150 mm size etc ccomplete all as specified and directed by Engineer-in-charge

Supply and Fixing aluminium handle cast type anodised 100 mm size etc ccomplete all as specified and directed by Engineer-in-charge

Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed by Engineer-in-charge.

Supply and fixing 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of new untreated wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting two coat with synthetic enamel paint over a coat of pink primer including cleaning, stopping and rubbing down and removing all dropings etc. complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide primer including cleaning, stopping and rubbing down and removing all dropings etc. complete all as specified and directed by Engineer-in-charge.

Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets including removing rubbish obtained from dismantling from worksite outside MD land at any distance complete all as specified and directed by Engineer-in-charge.

Material and labour for non asbestos fibre cement building board, 4mm thick, fixed to aluminium frame work with screw as in ceiling in flat or sloping complete all as specified and directed by Engineer-in-charge.

Supplying and fixing Aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 X 605 mm with aluminium main T section of size 36.5 X 23.5 X 1.6 mm and cross T of size 23.5 X 23.8 X 1.6 mm with aluminium wall angle of size 36.5 X 23.5 X 1.6mm with suspender complete all as specified and directed by Engineer-in-charge.

Material and labour for anodised aluminium frame with power coating of min thickness 50 micron for doors, windows,ventilators wih one or more rebates joining cleat for fixing etc complete all as specified and directed by Engineer-in-charge.

Material and labour for anodised aluminium door shutter with power coating of min thickness 50 micron, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips,rubber neoprene packing, handle 4 no. in each door ,hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engineer-in-charge.

Material and labour for anodised aluminium window and ventilator shutters with power coating of min thickness 50 micron, sliding or fixed type without sash bar, aluminium section weighting 0.55 Kg/m including necessary joining cleats, glazing clips,rubber packing,anodised aluminium snap beading, screws, etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing 5.5 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 4 mm thick figured glass,pin head type, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with oil putty complete all as specified and directed by Engineer-in-charge.

Supply and fixing Stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-charge.

Material and labour for aluminium grill of thickness 5mm and opening not exceeding 75mm*100mm complete all as specified and directed by Engineer-in-charge.

supply and fixing in repair Mortice lock , 2 lever ,vertical type , size 100mm, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair Prelaminated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in kitchen cabinet shutter complete all as specified and directed by Engineer-in-charge.

Taking out existing aluminium frame with shutter and repair of all necessary items i.e. hinge aluminium snap beading, rubber packing, glazing clip, door closer, door closer screw etc, any type of repair and making good distrubed portion of wall/floor incl. refixing the same complete all as specified and directed by Engineer-in-charge.

Repair to steel window, i.e. hinges ,window stays,handles etc. welding of hinge complete all as specified and directed by Engineer-in-charge.

Material and labour for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in hold fast block, filling in pressed steel chowkats including necessary form work etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing of bands, straps,hold fast etc conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer-in-charge.

S&F in repairs aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 25 drapery rods, coloured, standard quality, PVC coated not less than 25 dia. With heads at both ends and middle support ring etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs for double action floor spring hydraulically regu-lated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to existing surfaces complete all as specified and directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed by Engineer-in-charge.

M&L for rolled mild steel as in roof truss, purlins, rails and fastering and similar work including distance pieces, cleats etc conforming to Fe-410-W ( Gde-E-250) quality including cutting and welding as required complete all as specified and directed by Engineer-in-charge.

Dismantling of asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings including removing of unserviceable material from work site complete all as specified and directed by Engineer-in-charge.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

M/s PRABIR ENTERPRISE

M/S S. P. ENTERPRISE

M/S D G ENTERPRISE