REPAIRS TO CRACKS ROOF TREATMENT GUNITING PLASTER MASNORY AND GROUNTING AND REPAIR REPLACEMENT OF SEWAGE SYSTEM AT OD SHAKURBASTI AND HIRANKUDNA UNDER GE NORTH DELHI CANTT 10

Amount

SCH 'A' PART-I Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified.

M&L for Reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as in chajjas and the like, all as specified and directed by Engr-in-Charge.

Use and waste of form work to soffits of suspended slab such as chajja slab landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .

M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L for TMT bars 6mm to 8mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L Taking down cement plaster from other than fair faces of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water , rendering 15mm thick in cement mortar 1:6,mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water,and rendering 15 mm th in cm (1:4) in two layers (10mm+5mm ) mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

M&L Taking down cement plaster of any description from brick, or concrete cieling surfaces including raking out joints, hacking for key,scrubbing down with water,and rendering 10 mm th in cm (1:4) in mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

M&L for cutting chases in V shape, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Bk walls complete all as specified and directed.

Supply only PD proof 101 LW (+) of Dr Fixit or eqe. complete all as specified.

Supply only super latex 302 of Dr Fixit or eqe.complete all as specified.

Demolition of brick/stone masonry built in CM. all as specified.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 but except bricks all as specified.

M&L half brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed.

S&F chicken wire mesh fixed 20mm mesh size with nails at the junction of two desimiler material on wall, roof or any other surface/location all as sepecified and directed

Demolition of cement concrete unreinforced in any position not exceed 15 cm thickness complete all as sepecified and directed

M&LProviding cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0.

M&L Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm complete all as sepecified and directed.

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 15mm thick plaster screed bed layer in CM 1:3 finished even and smooth mixed with water proofing compound on concrete surfaces. (WPC shall be measured and paid separately) (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge

Supply only water proofing compound @ 200 ml per 50 kg cement or as per manufacturer instructions complete all as specified.

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in roof padding,roof kerbs of mud spots rounded or chamfered levelling /sloping course finished even and fair complete all as specified.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting, scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layess of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunited surface of required thickness to give even, uniform and smooth finish conforming to proper gerometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs all as specified. (Note : Steel welded mesh is to be tightend / welded with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor).

M&L preparing new/old galvanized wire mesh in door/windows and applying two coats of blue oil paint.

M&L for preparing newly plastered surfaces of ceilling and applying two coats of white wash complete all as specified.

M&L preparation of newly plastered surface on walls and applying 2 coat of OBD over a coat of chalk whiting complete all as specified.

M&L two coats of cement base paint on walls including preparation on new surfaces over a coat of primer complete all as specified and directed. .

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces wall by brooming down scrapping down smoke and efflorescent salts etc and applying two coat of white wash on walls complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds,filling gaps with wall care putty, complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying one coats of cement base paint on external wall surface complete all as specified and directed. ( Height of Bldg is upto 15 mtr )

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed.

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

M & L for form work as in suspended floors, slab and similar other locations not exc 200 mm thick for rough finished surface, complete all as specified.

M & L for form work edges of concete flats, treads,breaks in floors,window cills,cncete railings, opening in concrete walls,floors and roofs n exc 20cm wide and sides of Rcc/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide complete all as specified.

M & L for providing precast reinforced cement concrete jallies 40 mm thick including all mouldings type B-0 1:2:4 (12.5mm graded stone aggreagte) set in cement mortar 1:4 including taking down Old RCC Jallies complete all as specified.

M&L for renderning 15 mm thick in CM 1:4 on any faces of brick/concrete surfaces finished even and smooth with out using extra cement and two coats of cement base paint with one coat primer complete all as specified and all as directed by Engineer in charge .

S & F in repairs cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints (in CM 1:1), laid in trenches or in floors or fixed to walls, bore of pipe 75 mm complete all as specified and as directed

S & F cast iron branch pieces single (equal or unequal) ordinary or inverted, spigot or socket type or with parallel branches, bore of pipe 75 mm fitted with oval access door complete all as directed

S & F cast iron bends (any radius) tapers or diminishing pieces (larger bore measured) for bore of pipe 75 mm, fitted complete all as directed

S & F in repairs stack clamps made of flat iron 20x5 mm with iron rod of 16 mm dia for bore of pipe 75 mm fixed to walls with nails of suitable sizes complete all as directed

S & F in repairs cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints (in CM 1:1), laid in trenches or in floors or fixed to walls, bore of pipe 100 mm complete all as specified and as directed

S & F in repairs cast iron branch pieces single (equal or unequal) ordinary or inverted, spigot or socket type or with parallel branches, bore of pipe 100 mm fitted with oval access door complete all as directed

S & F in repairs cast iron bends (any radius) tapers or diminishing pieces (larger bore measured) for bore of pipe 100 mm, fitted with oval access door complete all as directed

S & F in repairs stack clamps made of flat iron 20x5 mm with iron rod of 16 mm dia for bore of pipe 100 mm fixed to walls with nails of suitable sizes complete all as directed

S & F in repairs 110 mm pvc (SWR) pipes single socketed in any length along with rubber ring joints fixed to walls with all accessories complete all as specified and as directed

Taking down eaves gutters and rainwater (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F Plain, galvanised, mild steel sheeting 1mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl nessary welding ,screwing, bending etc complete all as specified and directed by Engr-in-Charge. Note: Hieght of building/ shed is upto 12mtr. Contractor will provide safety arrangements.

S&F PVC (SWR) pipes single socketed 150mm dia in any length with rubber ring joints fixed to walls/ column including all fittings as socket, L/T bend etc complete all as specified and directed by Engr-in-Charge.

S&F in repair 2mm thick plain fiber glass reinforced translucent plain sheeting as in clading, roofing, gates fixed with screw, washers complete all as specified and directed.

Dismantaling plain or corrugated AC sheeting any gauge, thickness, including nainital or similar pattern roof covering all as specified and directed..

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs, walls, with 'L' or 'J' type hooks etc all as specified and directed..Note: Hieght of building/ shed is upto 12mtr. Contractor will provide safety arrangements.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, confirming; Fe 410-W. all as specified and directed

S & F Steel work in tubular trusses/purlin of any size or shape including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 including nut,bolt, MS plate complete all as specified and directed by Engr-in-Charge.

M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The entire area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. The each block shall be connect of of 6 Qtrs. All roots of plants shall be removed completely and making good the disturbed surface with 1:4 and painted cement base or acrylic paint as per old finish all as specified and directed by Engr-in-charge

S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls incl taking down all as specified.

S&F in repairs 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls incl taking down all as specified.

Cutting chases pinning in making good to facing where required and pointing in CM (1:3) for concealed water tubing etc as in brick walls cutting not exc 10cm girth, complete all as specified and directed.

S&F in repairs 500 ltrs capacity three layer rotational molded polyethylene water storage tanks, colour white (cylindrical vertical with closed top) hoisted of and fixed in position incuding provn of inlet , out let and over flow connection with tank connection nipple of existing pipe dia including, dismantling existing water tanks etc all as specified and directed.

All as per item No 62 above but 1000 ltrs capacity of tanks

S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed etc all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed etc all as specified and directed.

Demolition of stone slabe or tiles pf any description or thickness in floors aprons etc laid bedded and pointed in any mortar comlete all as specified and directed

M/L 18- 20mm thick granite (of any type) work (table rubbed and polished) as in pillars, steps and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick plaster, all as specified.

Dismantling floor, hearth or wall tiling incliding cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premisses, complete all as specified and directed.

M&L for Vetrified Ceramic tiles 10 mm thick (Square/rectangular) light shade polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over 15mm thick screed bedding layer of mortar in CM 1:6 for laying floor finish complete all as specified and directed.

M & L non skid ceramic tiles coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and incliding 15 mm thick cement mortar (1:6) screed bed complete all as specified and directed.

M & L Non-skid ceramic coloured tiles 7 to 8mm thick square area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and joinnted in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L glazed ceramic coloured tiles size 450 x 300x 7-8 mm thick in walls etc set and jounted in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M & L glazed ceramic coloured tiles size 300 x 200x 7-8 mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Dismantling of timber scantlings, of framed work, from any position & height 40 Sq.cm and over in section complete all as specified and directed..

SCH 'A' PART-II M&L for Reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded cdrushed stone aggregate) as in roof slab, all as specified and directed by Engr-in-Charge.

Cleaning of EWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC pipes all types top to bottom including junctions etc, cleaning of sewage line upto GT complete all as specified and as directed.

Cleaning of manhole up to 1.00 meter depth any size of manhole and taking out sludge and depositing the same in notified area by Municipal Corp of Delhi for dumping or out side Defence land complete all as specified and as directed.

Cleaning of manhole depth exc1.00 meter and n exc 2.00 meter of any size of manhole and taking out sludge and depositing the same in notified area by Municipal Corp of Delhi for dumping or out side Defence land complete all as specified and as directed.

Cleaning of sewage line from GT to Ist manhole complete all as specified and as directed. Note:-Cleaning of sewage line of daimeter upto 100mm to 150mm

Cleaning of sewage line 100 mm dia from manhole to man hole by manual/ mechanicalrooding removing all sludge/waste aqnd making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Cleaning of sewage line 150 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Cleaning of sewage line 200 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Cleaning of sewage line 300 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Dewatering/desludging of septic tanks, soakage wells etc of any depth, cleaning of all sludge, silt residue of both organic and inorganic nature by manual labour or by mechanical scrappers etc and burried off the same out side the defence area notified by Municipal Corporation of Delhi all as specified and as directed by Engr-in-Charge.

Cleaning of sewage line, man holes exc 1.25 m depth and septic tank etc using mechanically oprated Hydraulic pressure machine equpied with jet and suction pressure cleaning all as specified and directed.(08 working hours for one job). Note work will be executed in foul condition

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with clamps etc including taking out/dismantling of old pipes complete all as specified.

S&F in repair PVC (SWR) bends any radius bore 75 mm

All as per item No. above but bore of pipe in 110 mm.

S & F in repair for precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mmx500mmx 80mm complete all as specified and as directed.

S & F in repair precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mm x1000mmx80mm omplete all as specified and as directed.

Excavation in soft/loose soil in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out complete all as specified and as directed.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and as directed.

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil omplete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia SGSW / RCCpipes after they are laid and tested including demolition of old bed and pipes omplete all as specified and as directed. (thickness of concrete bed 100mm).

All as per ser item No above here-in-before but for 200 mm internal dia SGSW/RCC pipes (thickness of concrete bed 150mm).

Supply and laying, jointing 150mm internal dia of salt glazed stoneware pipes grade 'A' incl testing and laid in trenches to a level on concrete bed complete all as specified.

All as per item No.96 here-in-before but 200mm internal dia of salt glazed stoneware pipes grade 'A' .

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes omplete all as specified and as directed.

S & F for precast reinforced cement concrete Manhole covers in 1:2:4 using 20 mmgraded stone agg and set in CM 1:4 all as specified and directed by Engineer-in-Charge.

Vitreous china squattting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests including CI 'P' or 'S' trap excluding flushing cistern but including connection to trap, anti syphonage pipe etc. complete, fixed in repairs all as specified.

Taking down cement plaster on brick walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. (Water proofing compound shll be measure and paid separatelly).

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement omplete all as specified and as directed. .

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified

M&L Chequered cement concrete tiles 200x200mm by 25 mm thick, with grey cement and no pigments incl over 15 mm thick screed bed in CM 1:6, jointed and pointed in neat cement slurry in floors.

M & L machine precast colour concrete decorative interlocking paver block of a with grey cement and pigment any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified.

M & L sand filling under floors including watering and consolidation.

M&L in repair for Ultra design coloured tiles with PU coating of size 300x300x25 mm thick rubber moulded with white cement, as in floors incl over 15 mm thick screed bed in CM 1:6 jointed and pointed in neat cement slurry all as directed.Make: Coral, A-1, Hindustan.

Dismantling fencing wire mesh, any type as per site all as directed.

M&L for punched tape concertina coil (PTTC) 610mm dia coil provided on Y shaped MS section including necessary biding/welding complete all as specified and directed.

S&F galvanised 2 starand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc as dirrected.

S&F in repair for framed work such as fencing posts, supporting flat iron strips, nut bolts, gates etc complete all as specified and directed.

Supply only chain link MS galavnised any size and type complete all as specified and directed

Fixing only chain link fencing incl line wires any mesh size & type to any type of standards rails straining bolts etc. incl provision of bindig wire.

S&F screw bolts (machine made) with hexagonal or squre heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts not exc 5cm and dia of shank 10 mm.

Excavating in post holes (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and raming earth or broken rubble midxed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface soft/loose soil.

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs. 19885.00

friends associeates

M/S SONU ENTERPRISES

QUALITY CONSTRUCTIONS CO

The new hut furnitures

V M CONSTRUCTION

S GOURAV PRAKASH ENTERPRISES