PROVN OF 01X TRG SHED (18MX10M) ALONG WITH FOOTPATH APPROX 400MX1.20M AT 50(I) PARA BDE PRO UNIT UNDER AGE B/R -II OF GE (W) AGRA

Amount

Excavating in trenches,in soft /loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out , complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm using soils complete all as specified & directed.

Removal of surplus excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point as in soft/loose soil complete all as specified and directed.

Surface excavation in soft/loose soil n.exc 30cm deep and averaging 15cm deep and getting out, including cutting to required gradient and camber as for formation of roads berms complete all as specified & directed.

Removal of surplus excavated soil to a distance exe. 250m but n.exc 500m and depositing where directed at a level n.exc 1.5m above the starting point as in soft/loose soil complete all as specified & directed..

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in fdn filling and mass concrete complete all as specified and directed.

M & L for TMT 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beam and Fdn, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified & directed.

M & L for TMT 5mm dia and over, upto 10mm dia in stirrups/ties, spacers and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/beam, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified & directed.

M & L for flat, Rough finished formwork to sides of concrete foundations, footings, plinth beam, bases of columns, raft similar work etc.including supports complete all as specified & directed .

M & L for Square, Circular & rectangular, Rough finished formwork to sides of pillars,posts, struts, piers, columns, similar work etc. including supports complete all as specified and directed.

M & L for flat Rough finished formwork to plinth/ lintel beam, soffits, roof beams, lintels, cantilevers, shelves, similar work etc. including supports complete all as specified and directed..

M & L for RCC (mix with mixture machine) Type B1 1:2:4 (20mm graded stone aggregate) in foundations of column, plinth beam, rafts, similar work etc complete all as specified and directed..

M & L for RCC (mix with mixture machine) Type B1 1:2:4 (20mm graded stone aggregate) in column, pillars, piers, posts, similar work etc complete all as specified and directed..

M & L for RCC (mix with mixture machine) Type B1 1:2:4 (20mm graded stone aggregate) in Beams, lintel/roof beam, similar work etc complete all as specified and directed..

M&L for brickwork with fly ash brick (old size) built in CM 1:6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Spreading and levelling (Soil) in layers n exc. 25 cm, well ramming including watering as required, complete all as specified and directed.

M&L for moorum/red bajri filling in floors/sub base or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed incl watering complete all as specified and directed.

M & L for hard core of broken stones or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M & L for PCC 1:5:10 (75mm thick) Type E-2 using 40 mm graded aggregate as in floor & subbase, similar work etc complete all as specified and directed..

M&L Machine cut kota stone with white marble strip 20-25 mm thick as in floor, laid and jointed with grey cement slurry with 3.0 kg of cement per sqm ,mixed with pigment to match the shade of the stone including grinding and polishing over 20mm thick screed bed in CM (1:4) as in floor complete all as specified and directed.

M & L for Machine cut & polished smooth surface of kota stone slab 20-25mm thick as in skerting, including 10 mm thick cement plaster inch 1:4 complete all as specified and directed.

M&L roof truss (framed) trussed, purlins, crane gantries, rails , box type section and fasterning and heavy bracket framing (Beam, tee, angle, M S plates etc including steel primer coat, welding, distnace pieces cleats etc confirming to Fe290 grade E-165 complete all as specified and directed..

S&F rolled section as in main and cross beams hip and angle, jack rafters, purlins, box type section where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc including steel primer coat, welding, confirming to Fe290 grade E-165.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, washer as specified.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet for ridges 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, washer as specified.

M&L PCC 75 mm thick (1:3:6) type C-1 using 20 mm graded aggregate, plinth protection / sub base etc complete all as specified and directed..

M&L for plain Cement Concrete Type B1 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in coping, hold fast, gap filling of door frame, benching of MH, and moulded precast kerb stone of size as directed including jointed, pointed in cement mortar 1:4 embedding in ground to a depth as indicated, & inside support of kerb stone, taping earth around kerd stone and also removing surplus soil, and similar work etc including necessary form work and all as directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on concrete, brick/stone surfaces of wall finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick on concrete/ brick/stone surface wall in cement mortar 1:4 mixed with liquid WPC @ 200 ml/50Kg of cement or as per manufactures's instructions, finished fair and even, complete all as specified and directed. Note:- WPC shall be measured and paid separately as supply only.

Supply only integral water proofing compound (Liquid) complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for applying two coats of cement based paint over a coat of primer on newly plastered surfaces including preparation, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions including necessary scaffoldingcomplete all as specified and directed.

M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed.

M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cusion shall be measured & paid separately

M&L PCC 75 mm thick ( 1:4:8) type D-2, (using 40 mm graded aggregatr) as in sub base complete all as specified and directed.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multi stranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0 mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as per item No-38 here in before but One socket outlet 5/6 Amps on independent bd but not below the board controlled by one switch complete all as specified & directed.

All as per item No-1 here in before but One socket outlet 5/6 Amps controlled by one switch on same board with other switches complete all as specified & directed.

All as per item No-38 here in before but using 2.5 sqmm PVC FRLS insulated stranded copper cunductor cable and for one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed. NOTE-For item no 1 to 4 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed.

Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed.

Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed.

Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed.

S&F for ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed.

Supply & fix rotory stepped type electronic fan regulator mini flush type 100 watt 230 Volts complete all as specified & directed.

Supply and fixing LED Bulb 15 watt suitable for lamp holder complete all as specified and directed.

Supply & fix surface/wall mounting LED batten 20 watt luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed.

Supply & fix, outdoor security light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Supply and fix MCB DB 4 way sheet metal enclosure triple pole and neutral 415 volts with 100 Amp standard copper bus bar IP-43, IK-09 with metal doors of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mouting type double door factory fabricated complete as per IEC 61439-3 without MCB but with enclosue blank plate complete all as specified and directed .

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doorscomplete all as specified and directed.

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 4 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doorscomplete all as specified and directed.

Supply & fix Isolator TPN, 4 Pole, 415 Volts, 50 Hz AC Supply , 63 Amps, IP-20 as per IEC 60947-3 ISI marked complete all as specified & directed.

Supply and fixing MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 32 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified & directed.

Supply & fix MCB SP, 40 Amps, 'C' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.

Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

Supply & Laying, testing ,cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade, with stranded aluminium conductor of size 16 Sqmm 4 core compele all as specified and as directed.

Supply & Laying, testing ,cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade, with stranded aluminium conductor of size 6 Sqmm 2 core compele all as specified and as directed.

Supplying and laying un-reinforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable.

M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as directed at site by Engr- in-Charge.

Supply and fixing GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed.

Supply and fix ceiling fan, 1200mm sweep, minimum 220 CFM, 230 V, BEE 5 star rated, BLDC (brushless direct current motor ) type complete with standard accessories i.e (three blade, 02 Nos canopy, electronic type modular fan regulator 90 to 100 W, down rod of length 1.5 mtr to 2.0 mtr long, 01 No. fan hock, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts, bolts, washers, split locking pins etc), double ball bearing, copper wound with synchronous motor, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cable cord complete all as specified and directed.

M/S KAMAKHYA CONTRACTORS

CREATIVE CONSTRUCTION

VISHESH BUILDERS

M/s Rahul Kumar Agrawal

RAJESH ENTERPRISES

M/s D AND R CONSTRUCTION AND SUPPIERS

Balaji Associates

MNR ASSOCIATES

N.K. ENTERPRISES

M/s Kok Singh Sisodia