Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹42.0 LAccepted-AOC C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | 1 | Accepted-AOC Being lowest | |
| 2 | 2₹43.5 L+₹1.4 L (3.39%)Rejected-Finance 40 6 UKHARA PO PRATAP PURA AGRA UP 282001 | AGRA | AGRA | UP | 282001 | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹48.5 L+₹6.4 L (15.3%)Rejected-Finance 86 NAROTTAM KUNJ MADHU NAGAR AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | 3 | Rejected-Finance Not being lowest | |
| 4 | 4₹51.6 L+₹9.5 L (22.6%)Rejected-Finance VILLAGE DEVRATHA NO 1 POST SHAHGANJ DIST AGRA U P | 4 | Rejected-Finance Not being lowest | |
| 5 | 5₹53.4 L+₹11.3 L (26.8%)Rejected-Finance | 5 | Rejected-Finance Not being lowest |
Tender Value
₹69.3 L
EMD Value
₹1.4 L
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE AGRA
112 TAJ ROAD AGRA CANTT
SPL REPAIR TO ROAD ALONGWITH ROAD SIDE FURNITURE UNDER GE (EAST) AGRA
2022_MES_569712_1
84271/E8
Open Tender
Civil Works
Item Rate
180 days
AGRA
MES contractors enlisted in Class C category a(v) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹1,000
GE EAST AGRA
₹1.4 L
Yes
25 Feb 2023
17 Dec 2022
28 Jan 2023
17 Dec 2022
21 Jan 2023
7 Jan 2023
17 Dec 2022 - 24 Dec 2022
Amount
M&L for repairs to pot holes of any depth of size n. exc. 1 sqm each including sweeping free from dust and mud or water, scoring sunken portion of roads path etc by cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (incl supply of road metal) complete all as specified and directed.
M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 10 kg per 10 sqm over the prepared surfaces by mechanical sprayer complete all as specified and directed.
M&L for preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed
M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sqm over the old black top surface after prepared surfaces by mechanical sprayer complete all as specified and directed.
M&L for laying bituminous premix Asphaltic semi dense asphaltic concrete with using mechanical paver 30 mm thick consolidated thickness with using 5.5% binder content by weight of total mix, (Paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power road roller to required camber and gradient complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted lower side of binder used however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A' / BOQ
M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as a arrow dashes, letters etc on road or pavement with using retro reflective thermoplastic road marking paint of white or yellow colour approved make applied with machine all as per manufacturer's instructions & colour as directed by GE complete all as specified and directed.
Supply and fixing metal tubular delinator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) ( of size 150 x 150 x 300 mm) complete all as specified and directed.
Supply and fixing cate eye solar reflector type of metal body alloy of size 100 mm x 100 mm x 20 mm with PMMA stripless reflector of model No. DA 970.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.
Demolition of cement concrete (unreinfroced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size / shape, made by table vibratory methods using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) 100 mm thick as in sub floor, sub base, padding etc complete all as specified and directed.
M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggreage) providing precast kerb stone as in edging finished even and smooth cross section area not lessthan embedding kerb stone and removing surplus earth outside premises complete all as specified and directed.
Supply & fixing of retro reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro reflective sheeting as approved by Engineer in charge letter, symbol, borders etc will be as per IRC-67 with required colour scheme on the boards and with the high uintensity grade A, the aluminium sheet to be riveted to MS frame of angle iron of size 40 x 40 x 4 mm the boards will be fixed to 1 No. 50 x 50 mm square post made of MS angle 50 x 50 x 4mm, 4 m long welded to the frame with adquate anti theft arrangement sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction complete all as specified and directed.
S&F convex mirror 80 cm in size out door purpose including stand / pedestal embedded in PCC block 1:2:4 type B-1 (using 20 mm graded stone aggregate) size 45 x 45 x 40 cm and necessary earth work complete all as specified and directed.
Attar Singh and Sons
M/s J S & SONS
M/s M S Sharma and Co.
m/s meetu enterprises
Lachman Das Govind Ram
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .