REPLACEMENT OF FIRE FIGHTING INSTALLATION, DISTRIBUTION LINES, FIRE HYDRANT SYSTEM (PIPE, MOTER/PUMPS AND OTHER CONNECTED WORKS) AT DPL COMPLEX, MAYUR VIHAR, TAG ARC COMPLEX MAHIPALPUR, GITORNI AREA UNDER GE SOUTH WEST, NEW DELHI-03

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority : HQ CWE NO 2 DELHI CANTT-10

NAME OF WORK: REPLACEMENT OF FIRE FIGHTING INSTALLATION, DISTRIBUTION LINES, FIRE HYDRANT SYSTEM (PIPE, MOTER/PUMPS AND OTHER CONNECTED WORKS) AT DP COMPLEX, MAYUR VIHAR, TAG ARC COMPLEX MAHIPALPUR, GITORNI AREA UNDER GE SOUTH WEST,NEW DELHI-03

Contract No : CWE/WEST/TOKEN-43/2025-26

Sch. item No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Supply, laying, fixing and testing in replacement of heavy duty MS Pipe conforming to IS: 1239/3589 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. including welding, cutting, and grinding works, laid in trenches, or fixing in wall, ceiling and floor complete and making good the disturbed surface similar to existing excavation & providing cement concrete blocks as supports and painting with two or more coats of synthetic enamel paint of post office red coloras per IS- 10221, in and including disconnected/dismantaling and taking out of rusty/damaged MS pipes complete all as specified and as directed of following sizes as required:-

150 mm. dia 30 RM 0.0000 Excess(+) Full Conversion INR

100 mm. dia 30 RM 0.0000 Excess(+) Full Conversion INR

80 mm. dia 30 RM 0.0000 Excess(+) Full Conversion INR

65 mm. dia 30 RM 0.0000 Excess(+) Full Conversion INR

50 mm dia 30 RM 0.0000 Excess(+) Full Conversion INR

Supplying, fixing and testing in replacement of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze, ISI marked complete with matching flange, nuts, bolts, washers, gaskets and conforming to IS: 780 complete all as specified and as directed of following sizes as required:-

150 mm dia 4 Each 0.0000 Excess(+) Full Conversion INR

100 mm dia 4 Each 0.0000 Excess(+) Full Conversion INR

80 mm dia 4 Each 0.0000 Excess(+) Full Conversion INR

Supplying, fixing and testing in replacement of double flanged butterfly valve of PN 1.6 rating, CI , gear/hand lever operated, with soft seated wafer, bronze and ss 304 shaft duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 complete all as specified and as directed of following sizes as required.

150 mm dia 4 Each 0.0000 Excess(+) Full Conversion INR

100 mm dia 4 Each 0.0000 Excess(+) Full Conversion INR

80 mm dia 4 Each 0.0000 Excess(+) Full Conversion INR

Supplying, fixing and testing in replacement of non return valve flange type of PN 1.6 rating, ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 complete all as specified and as directed of following sizes as required. :

150 mm dia 3 Each 0.0000 Excess(+) Full Conversion INR

100 mm dia 3 Each 0.0000 Excess(+) Full Conversion INR

80 mm dia 2 Each 0.0000 Excess(+) Full Conversion INR

Supplying, fixing and testing in replacement of unserviceable gun metal branch pipe, short type, instantaneous pattern to suit hose delivery coupling of size 63 mm bore complete with gun metal solid jet nozzle of 15 mm nominal size confirmin to IS:903 complete all as specified and directed. 6 Each 0.0000 Excess(+) Full Conversion INR

Supplying, fixing and testing in replacement of unserviceable fire hydrant fanged type landing valve, oblique type, single headed outlet with hose copling adaptor of size 63 mm bore made of gun metal with female mouth and cast iron wheel and instantaneous spring lock, blank cap with chain confirmin to IS:5290 complete all as specified and directed. 2 Each 0.0000 Excess(+) Full Conversion INR

All as per item No 6 above but double headed outlet type 2 Each 0.0000 Excess(+) Full Conversion INR

Repair of sluice valve in position double flanged cast iron for repair , replacement of unserviceable components such as of bonnet, gland packing ,seat , disk gasket nut bolts and spindal with nut after repair grending ,resurfacing refixing the valve in position and testing complete all as specified and as directed of following sizes as required:-

150 mm dia 6 Each 0.0000 Excess(+) Full Conversion INR

100 mm dia 6 Each 0.0000 Excess(+) Full Conversion INR

80 mm dia 9 Each 0.0000 Excess(+) Full Conversion INR

M& L for servicing of diesel engine generator (Make -kirlosker ) direct coupling with horizontal mounted multi stage centrifugal pump (fire fighting pump capacity 75 HP model-DSM 100/36) servicing and maintenance by OEM/ authorised dealer cleaning and servicing of fuel supply assembly coolent assembly, AVR unit, control panel, incl repacement of minor spare parts viz. air filter ,oil filter , fuel filter ,battery terminals complete including servicing of CI impeller horizontal split casing pump with replacement of old bearing set gland packing lubricatiting all moveable parts all complete all as specified and directed. Note:- The contractor will attend breakdown immediately in case of generator gets off road or any other fault occured. 1 Each 0.0000 Excess(+) Full Conversion INR

Supplying, fixing and testing in replacement of unserviceable swinging hose reel comprising of ply rubber hose of size 20mm(3/4"), 30 m long tested with 25kg/cm²/350 psi bursting pressure with wall mounted mild steel pressel reel with 180º angle swinging with non-jamming contolling handle which shall stay at the ON/OFF position as set, wall bracket with 'U' shaped reel carrier made of CI of post office red colour finished in and including gun metal noel and shut off ball valve, heavy duty confirming to IS: 884 and ISI marked complete all as specified and directed. 1 Each 0.0000 Excess(+) Full Conversion INR

Supplying and install in replacement yard fire hydrant box, outdoor type of internal size not less than 120 cm x 60cm x 45 cm made out of 18 SWG thick CRCA mild steel sheet, factory made, totally enclosed with front side hinged openable cover with locking arrangement and pad lock duly painted with two coat of red post office colour synthetic enamel paint on inside and outside surface comprising 4 mm thick glass window of size not less than 100 X 45 cm on front side openable cover inscribed with word 'FIRE' (5 inch size) with post office red synthetic enamel paint. The box to be installed on brick pillar foundation with suitable size of MS foundation bolt grouting in and including dismantling corroded/worn out yard fire hydrant box from brick pillar foundation complete all as specified and as directed. 4 Each Job 0.0000 Excess(+) Full Conversion INR

Supply & fixing in replacement of broken glass window size not less than 100 cm x 45 cm of 4 mm thick in yard fire hydrant box including replacement of unservicable rubber beeding of suitable size complete all as specified and as directed. 30 Each Job 0.0000 Excess(+) Full Conversion INR

Supply & fixing in replacement of broken glass window size not less than 110 cm x 110 cm of 4 mm thick in hydrant box including replacement of unservicable rubber beeding of suitable size complete all as specified and as directed. 30 Each Job 0.0000 Excess(+) Full Conversion INR

Supplying and fixing in replacement of unserviceable internal hydrant rubber washer 4mm thick of size 12mm inner diameter and 72 mm outer diameter complete all as specified and as directed. 30 Each 0.0000 Excess(+) Full Conversion INR

Supply & fixing in replacement of unserviceable taflon/nylon washer with outer dia 19mm and inner dia 9 mm and thichness 3mm complete all as specified and as directed. 30 Each 0.0000 Excess(+) Full Conversion INR

M&L repair/servicing of air vessel (size 300mm dia, 2 m height) by disconnecting water pipe conection ,opening air valve cleaning of inner/outer surface for proper functioning after repairing and servicing testing for proper functioning including painting with synthetic enamel paint of post office red coloured over two coat of red oxide primer on outside complete all as specified and as directed. 2 Each 0.0000 Excess(+) Full Conversion INR

M&L for fittings for flanged pipes such as Bends, Tapers, Tee Pieces (Single & double branch) any type and angle/radious and straight connecting pieces but all ends flanged complete all as specified and as directed. 120 KG 0.0000 Excess(+) Full Conversion INR

M&L for painting up to 200 mm bore New MS/GI pipe with one coat of red oxide primer and two coats of red post office synthetic enamel paints on all external steel surface after throughly cleaning/scraping of old paints, rust and scale etc.before applying the primer all complete all as specified and as directed. 800 Sqm 0.0000 Excess(+) Full Conversion INR

M&L for painting of MS fire hydrant box Indoor and outdoor type of internal size not less than 97x105x60cm after throughly cleaning/scraping of old paints, preparation of surfaces with emery paper as per existing colour code duly painted with two coat of red post office colour synthetic enamel paint in surface over a coat of red oxide primer complete all as specified and as directed. 30 Each Job 0.0000 Excess(+) Full Conversion INR

M&L painting of pump motor complete set including base plate, of capacity 75 HP motor with two coat of synthetic enamel paint of existing colour after preparing surfaces all complete all as specified and as directed. 3 Each Job 0.0000 Excess(+) Full Conversion INR

Supply and fixing in replacement of dial type pressure gauge 4"dial 0-14 kgs rating including necessary fittings complete all as specified and as directed. 8 Each 0.0000 Excess(+) Full Conversion INR

M&L for cleaning of fire pipe line of size 80 mm to 150 mm passing through any type of duct/trench/wall size not less than 1.0 mtr width and 1.5 mtr depth by using high pressure water jet pump for removing/taking up dirty water alongwith sludge including cleaning of valve chamber/pit of any size by scrubbing of the internal surfaces and refixing of MS cover complete all as specified and directed. (Note:- Earth work if required at site the same will be measured under relevant item of sch A) 1000 RM 0.0000 Excess(+) Full Conversion INR

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep in any type of PCC/Hard/Dense soil complete all as specified and directed. 47 Cum 0.0000 Excess(+) Full Conversion INR

Returning filling including leveling,watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and directed. 38 Cum 0.0000 Excess(+) Full Conversion INR

Removing the excavated materials not exceeding 50 m and depositing where directed at level not exceeding 1.5 m above the starting level complete all as specified and directed. Cum 0.0000 Excess(+) Full Conversion INR

Disconnecting of electric connection and taking out pump motor from 75 HP 3 phase 415 volt pump set ,transporting the same work shop opening the motor, removing burnt winding and cleaning winding slots and rewinding of motor using suitable gauge/ size with supper enamelled copper wire, replacing insulation paper of class F and fire proof sleeves, varnishing complete, oiling, greasing, replacing old rear/ front bearings with new and reassembling complete motor including testing at site complete all as specified and directed. 1 Each Job 0.0000 Excess(+) Full Conversion INR

All as per item No 26 here in above but for motor pump set up to 5.5 HP motor pump set 1 Each Job 0.0000 Excess(+) Full Conversion INR

M&L for taking out electrical driven motor suitable for 75 HP pump setafter disconnected all electrical and water connection and disassembling form base and uncoupling motor shaft copling and taking and transport to work shop & opening carefully and servicing complete with replacing of bushes/bearings, motor crank set, shaft seal assembly , rubber gasket, nut, bolt & washers painting internally with synthetic enamell paint and re-fixing it in original position and making out all electrical and water connection after necessary prepartion incl testing & commissioning complete all as specified and directed. 1 Each Job 0.0000 Excess(+) Full Conversion INR

All as per item No 28 above but for motor pump set up to 5.5 HP motor pump set complete all as specified and directed. 1 Each Job 0.0000 Excess(+) Full Conversion INR

M& L repair and servicing of 75 HP pump set by dismantling at site or transport to work shop as required by opening the pump, replacement unserviceable both side bearing and bushes, shaft seal assembly and worn out nut and bolts gaskets, machining of shafts, over hauling & greasing of pump and reassembling complete with testing motor at site complete all as specified and directed. 2 Each Job 0.0000 Excess(+) Full Conversion INR

All as per item No 30 as above but up to 5.5 HP pump capacity complete all as specified and directed. 1 Each Job 0.0000 Excess(+) Full Conversion INR

Supply and Fixing in replacement of star delta strater in sheet -steel enclosure type with suitable power contactor ,single phase preventor and relay for pump motor rating 5.5 HP 3 phase 415 Volt 50 Hz with suitable relay range complete all as specified and directed. 1 Each 0.0000 Excess(+) Full Conversion INR

Supply only front bearing for 75 HP motor for bearing suitable / existing sample complete all as specified and directed. 2 Each set 0.0000 Excess(+) Full Conversion INR

Supply only rear end bearing for 75 HP motor for bearing suitable / existing sample complete all as specified and directed. 2 Each set 0.0000 Excess(+) Full Conversion INR

S & F in repair tyre coupling suitable for 75 HP motor set with existing alignement all as specifiedand directed 4 Each 0.0000 Excess(+) Full Conversion INR

Supply and fix in repair 3 pole power contactor 2 NO +2 NC ML 6 three phase, AC 440 volts, 50Hz, , of 110 Amps AC-1, 110 Amps AC-3. complete all as specified and directed. 3 Each 0.0000 Excess(+) Full Conversion INR

Supply and fix in repair 3 pole power contactor MNX 80 AC-1 rating 80 A and AC 3 rating 100 A three phase, AC 440 volts, 50Hz, complete all as specified and directed. 3 Each 0.0000 Excess(+) Full Conversion INR

Supply and fix in repair 3 pole power contactor MNX 35 AC-1 rating 32 A and AC 3 rating 45 A three phase, AC 440 volts, 50Hz, complete all as specified and directed. 3 Each 0.0000 Excess(+) Full Conversion INR

Supply and fix in repair 3 pole power contactor MNX 25 AC-1 rating 25 A and AC 3 rating 45 A three phase, AC 440 volts, 50Hz, complete all as specified and directed. 3 Each 0.0000 Excess(+) Full Conversion INR

Supply and fix in repair ST timer 100 range 3-30 Sec coil voltage 160-500 Volt AC complete all as specified and directed. 4 Each 0.0000 Excess(+) Full Conversion INR

Supply and fix in repair thermal overhead relay MN-5 with start and off/reset of Amps range Relay 66-110A 415V AC Class complete all as specified and directed. 3 Each 0.0000 Excess(+) Full Conversion INR

Supply and Fixing in replacement of MCCB 250 Amp breaking capacity 36 KA , 4 pole, 415 volts, 50 Hz complete all as specified and directed. 3 Each 0.0000 Excess(+) Full Conversion INR

Supply and Fixing in replacement of MCCB 100 Amp breaking capacity 16 KA , 3 pole and neutral , 415 volts, 50 Hz complete all as specified and directed. 1 Each 0.0000 Excess(+) Full Conversion INR

Supply and fix in repair rubber gland packing suitable for sluice valve 200/150 mm dia complete all as specified and directed. 30 Each job 0.0000 Excess(+) Full Conversion INR

Supply and fix in repair rubber gland packing suitable for sluice valve 100/80 mm dia complete all as specified and directed. 30 Each job 0.0000 Excess(+) Full Conversion INR

M & L for repair of NRV of size 200/150 mm flanged type by opening and cleaning inner plate spindle replacement of 6mm thick rubber gasket, MS nuts, bolts and washers after repairing refixing the same in existing position complete all as specified and directed. 4 Each Job 0.0000 Excess(+) Full Conversion INR

M&L for repair of leakage fire fighting distribution pipe line 80 mm bore to 150 mm bore by cutting of existing line finding leakage and repair with suitable jointing materials complete including necessary exavation, returning filling, removing etc in any type of soil complete all as specified and directed. Note -: T&P and fittings if required shall be inclusive in qouted rate. 16 Each Job 0.0000 Excess(+) Full Conversion INR

Supplying, fixing and testing in replacement of unserviceable synthetic fibre circular woven seamless reinforcement jacketed coupling with type- II (reinforced rubber lined type), flexible fire hose made of 100% synthetic yarn, circular shaped of size 63 mm bore x 15 mtr long, complete with gun metal coupling of 63mm, with multi serrated tail and double instantaneous sprin lock arrangment comprising of heavy duty pair of gun metal male and female parts, hydralically crimped to hose with rubber cap washer and copper binding wire confirming to IS: 903 and ISI marked complete all as specified and directed. 1 Each 0.0000 Excess(+) Full Conversion INR

Supplying, fixing and testing in replacement of unserviceable swinging hose reel comprising of ply rubber hose of size 20mm(3/4"), 30m long tested with 25kg/cm²/350 psi bursting pressure with wall mounted mild steel pressel reel with 180º angle swinging with non-jamming contolling handle which shall stay at the ON/OFF position as set, wall bracket with 'U' shaped reel carrier made of CI of post office red colour finish in and including gun metal noel and shut off ball valve, heavy duty confirming to IS: 884 and ISI marked complete all as specified and directed. 2 Each 0.0000 Excess(+) Full Conversion INR

Supplying and fixing in replacement of unserviceable internal hydrant rubber washer 4mm thick of size 12mm inner diameter and 72mm outer diameter complete all as specified and directed. 20 Each 0.0000 Excess(+) Full Conversion INR

S&F in replacement of battery 12V 180 AH including suitable battery lead complete all as specified and directed. 4 Each 0.0000 Excess(+) Full Conversion INR

Supplying and install in replacement yard fire hydrant box, outdoor type of internal size not less than 800mm X 600mmX 250mm and 60 cm width, made out of 18 SWG thick CRCA mild steel sheet, factory made, totally enclosed with front side hinged openable cover with locking arrangement and pad lock duly painted with two coat of red post office colour synthetic enamel paint on outside surface and white colour paint on inside surface over a coat of red oxide primer comprising 4 mm thick glass window of size not less than 76 X 76 cm on front side openable cover inscribed with word 'FIRE' (5 inch size) with post office red synthetic enamel paint. The box to be installed on brick pillar foundation with suitable size of MS foundation bolt grouting in and including dismantling corroded/worn out yard fire hydrant box from brick pillar foundation complete all as specified and as directed. 4 Each Job 0.0000 Excess(+) Full Conversion INR

M&L for dismantling and taking down corroded/worn out base frames/pit covers, any type of water supply/fire fighting installations and supply and fix new base frames/pit covers. MS angle iron frame /MS plates/MS flat or round bars including welding work,duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 50 KG 0.0000 Excess(+) Full Conversion INR

M&L for making insertion under road without cutting of road for laying of MS/GI pipe line up to 150 mm bore by using mechanically operated machine complete all as specified and directed. Note :- (i) Works are to be carried out as and where required. (ii) All T&P item/Scap folding as required at site will be arranged by the contractor at no extra cost. 3 RM 0.0000 Excess(+) Full Conversion INR

M & L in replacement of fire fighting stand post made out of 40 mm GI pipe of size 1.5mtr x 1.0mtr and 1.0 mtr high above the ground level incl cutting, welding and painting in frame and plinth protection of 0.6x0.6x0.3 mtr with hanging hooks 4 for hanging of sand buckets/4 fire extinguiser incl painting with red/post office red colour Complete as directed. 6 Each Job 0.0000 Excess(+) Full Conversion INR

M & L for fire bucket made out of 20 SWG GI sheet 10.0 Ltr capacity incl painting with red colour enamel paint. complete all as specified and directed. 12 Each 0.0000 Excess(+) Full Conversion INR

M & L in replacement of fire beater with bamboo 10’ long (02 Nos) incl painting with red coloured complete all as specified and directed. 6 Each 0.0000 Excess(+) Full Conversion INR

M & L in replacement of fire Hook 10’ long (02 Nos) incl painting with red coloured complete all as specified and directed. 6 Each 0.0000 Excess(+) Full Conversion INR

M&L for cleaning of underground/semi underground sump by taking out all sludge, silt from bottom and cleaning all inside walls with wire brush and brooming the walls and top ceiling/roof including washing the walls with fresh water mixed with bleaching powder and draining out complete sludge, silt etc from bottom of the sump and applying one coat of lime wash for the UG sump of capacity upto 25,000 gallons complete all as specified and directed. 4 Each 0.0000 Excess(+) Full Conversion INR

M&L for servicing of diesel engine generator (Make-Kirloskar) direct coupling with horizontal mounted multi stage centrifugal pump (fire fighting pump capacity 72 HP Diesel engine type - RB66TO) as per prescribed in repair servicing and maintenance by OEM/authorised dealer cleaning and servicing of fuel supply assembly coolent assembly, AVR unit, control panel incl replacement of minor spare parts viz air filter, oil filter, fuel filter, battery terminals complete including servicing of CI impeller horizantal split casing pump with replacement of old bearing set gland packing lubricating all moveable parts complete all as specified and directed. (Note:- The contractor will attend breakdown immediately in case of generator gets off road or any other fault occured. 1 Each 0.0000 Excess(+) Full Conversion INR

M&L for painting of pump, motor complete set including base plate, of capacity 60 HP motor with two coat of synthetic enamel paint after preparing surface complete all as specified and directed. 1 Each Job 0.0000 Excess(+) Full Conversion INR

Disconnecting of electric connection and taking out pump motor from 60 HP 3 phase 415 volt pumpset, transportating the same work shop opening the motor, removing burnt winding and cleaning winding slots and rewinding of motor using suitable gause/size with super enamelled copper wire, replacing insulation paper of class F and fire poor sleeves, varnishing complete, oiling, greasing, replacing old rear/front bearing with new and reassembling complete motor including testing at site complete all as specified and directed. 1 Each Job 0.0000 Excess(+) Full Conversion INR

All as per item No-62 above but for motor pump set up to 7.5 HP motor pump complete all as specified and directed. 1 Each Job 0.0000 Excess(+) Full Conversion INR

All as per item No 62 above but for motor pump set up to 15 HP motor pump set complete all as specified and directed. 1 Each Job 0.0000 Excess(+) Full Conversion INR

S&F in replacement of fully automatic star delta starter in sheet-steel enclouser type MN with single phase protection suitable for motor rating 5.5 KW 3 phase 415 volt 50 Hz relay range 12-15 Amps complete all as specified and directed. 2 Each 0.0000 Excess(+) Full Conversion INR

M&L for repair/servicing of LT indoor panel board of any size/type, cleaning with compressed air, checking all internal components viz wiring, controls replacement of old lugs, nut bolts, thimble for proper connection to main earth lead , glands to be provided /replaced as required at cable entires, fixing of front & back side broken door hinges after repair and servicing spray painting with powder coated paint with weather protection supper enamelled paint of existing colour in outer/inner side of panel aftercleaning and preparing surface complete all as specified and directed. (Note:- Any other Unsv spares if any required for replacement , same will be measured under relevent item of schedule) 2 Each Job 0.0000 Excess(+) Full Conversion INR

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI strip 32 x 6mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1,using (20mm graded stone aggregate), "mild steel angle iron frame" made out of MS angle iron of size 40x 40 x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering 40mm dia light grade, GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical "plate No 3" and connected to earthing test point all as specified and indicated including testing on completion including retrieving old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing complete all as specified and directed. 8 Each Set 0.0000 Excess(+) Full Conversion INR

Refilling of fire extingusers with Carbon dioxide ( CO2) capacity 2 Kg complete all as specified and as directed. 26 Each Job 0.0000 Excess(+) Full Conversion INR

Refilling of fire extingusers with Carbon dioxide ( CO2) capacity 4.5 complete all as specified and as directed. 26 Each Job 0.0000 Excess(+) Full Conversion INR

Refilling of fire extingusers with Carbon dioxide ( CO2) capacity 6.8 Kg complete all as specified and as directed. 2 Each Job 0.0000 Excess(+) Full Conversion INR

Refilling of fire extingusers with Carbon dioxide ( CO2) capacity 3.2 complete all as specified and as directed. 13 Each Job 0.0000 Excess(+) Full Conversion INR

Reffiling of fire extingusers with ABC(DCP) type 10 Kg capacity complete all as specified and as directed. 5 Each Job 0.0000 Excess(+) Full Conversion INR

Reffiling of fire extingusers with ABC(DCP) type 6 Kg capacity complete all as specified and as directed. 5 Each Job 0.0000 Excess(+) Full Conversion INR

Reffiling of fire extingusers with ABC(DCP) type 5 Kg capacity complete all as specified and as directed. 28 Each Job 0.0000 Excess(+) Full Conversion INR

Reffiling of fire extingusers with ABC(DCP) type 4 Kg capacity complete all as specified and as directed. 22 Each Job 0.0000 Excess(+) Full Conversion INR

Reffiling of fire extingusers with ABC type 1 Kg capacity complete all as specified and as directed. 1 Each Job 0.0000 Excess(+) Full Conversion INR

Supplying and fixing of fire branches(Nozzles) complete all as specified and as directed. 9 Each Job 0.0000 Excess(+) Full Conversion INR

Supplying, fixing and testing including taking down in replacement of unserviceable hose reel drum with swinging hose reel 30 mtr comprising of ply rubber hose of size 20mm(3/4"), 15m long tested with 25kg/cm²/350 psi bursting pressure with wall mounted mild steel pressel reel with 180º angle swinging with non-jamming contolling handle which shall stay at the ON/OFF position as set, wall bracket with 'U' shaped reel carrier made of CI of post office red colour finish in and including gun metal noel and shut off ball valve, heavy duty confirming to IS: 884 and ISI marked complete all as specified and as directed. 10 Each 0.0000 Excess(+) Full Conversion INR

Supply and fixing of RRL hose type - A 7.5 m complete all as specified and as directed. 4 Each 0.0000 Excess(+) Full Conversion INR

Supply and fixing of Fire Extinguisher, CO2 Type Capacity 2 kg, ISI Marked IS:15683 complete all as specified and as directed. 4 Each 0.0000 Excess(+) Full Conversion INR

S & F fire Extinguisher, CO2 Type Capacity 3 kg, ISI Marked IS:15683 complete all as specified and as directed. 5 Each 0.0000 Excess(+) Full Conversion INR

Supply and fixing of Fire Extinguisher, CO2 Type Capacity 4.5 kg, ISI Marked IS: 15683 complete all as specified and as directed. 5 Each 0.0000 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information