Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAccepted-AOC | ₹12.8 L Quoted ₹13.0 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹13.5 L+₹47,576 (3.66%)Rejected-Finance | ₹13.5 L+₹47,576 (3.66%) | L2 | Rejected-Finance L1 being accepted |
| 3 | L3₹13.7 L+₹70,190 (5.40%)Rejected-Finance | ₹13.7 L+₹70,190 (5.40%) | L3 | Rejected-Finance L1 being accepted |
| 4 | L4₹13.8 L+₹77,878 (5.99%)Rejected-Finance | ₹13.8 L+₹77,878 (5.99%) | L4 | Rejected-Finance L1 being accepted |
| 5 | L5₹13.9 L+₹85,780 (6.60%)Rejected-Finance | ₹13.9 L+₹85,780 (6.60%) | L5 | Rejected-Finance L1 being accepted |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
28 Sept 2020, 6:00 pmClosed
GE 867 EWS
GE 867 EWS C/O 99 APO PIN 913867
SPECIAL REPAIRS TO WATER SUPPLY LINE FROM POWAKHOLA NATURAL SOURCE TO MES PUMP HOUSE AT RHENOCK UNDER GE 867 EWS
2020_MES_375054_1
CA NO GE / 867 / TOKEN / 35 OF 2020-2021
Open Tender
Civil Works - Water Works
Item Rate
180 days
Rhenock
Refer Tender Documents
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹24,000
Yes
22 Oct 2020
5 Sept 2020
29 Sept 2020
5 Sept 2020
28 Sept 2020
22 Sept 2020
5 Sept 2020 - 12 Sept 2020
Amount
S&F 80 mm dia bore medium grade galvanised iron tubing with all fittings and fixtures complete laid in trenches or on ground including taking up or down existing water tubing and connections complete all as specified and as directed by Engineer-in-Charge. NOTE: Excavation and earth work shall be measured and paid separately.
All as per item No. 1 above but 50 mm dia bore.
All as per item No. 1 above but 40 mm dia bore.
All as per item No. 1 above but 25 mm dia bore. Make for Item No. 1 to 4: TATA/ ZENITH / JINDAL
S&F 80 mm bore cast Iron sluice valve, confirming to IS 780, both ends flanged, with iron wheel, brass spindle complete with jointing materials, nuts, bolts, washers and rubber gasket etc., including Disconnecting and taking out the old unserviceable sluice valve complete all as specified and as directed by Engineer-in-Charge. Make:- KARTAR/ DURGA/ KIRLOSKAR or equivalent ISI marked make as approved by GE.
S&F gun-metal, globe or gate valves of with iron wheel head, screwed both ends for iron pipe of 50 mm dia bore and fixed including taking down existing unserviceable valve complete all as specified and directed by the Engineer-in-Charge.
All as per item No. 6 above but 40 mm dia bore.
All as per item No. 6 above but 25 mm dia bore. Make for Item No. 6 to 8: LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE.
Excavation in trenches ,n.exe 1.5m wide and n.exe 1.5m deep for foundation, laying of pipes etc., or for shafts, wells, cesspits, manholes etc., n.exe 10 sqm on plan and n. exe 1.5 m in depth and getting out in soft/ loose soil complete all as directed by Engineer-in-Charge.
Returning, filling in soil, including spreading leveling, watering and well ramming in laying not exceeding 25 cm thick complete all as directed by Engineer-in-Charge.
Removing excavated soil to a distance n.exe 50m and depositing where directed at a level n.exe 1.5m above the starting point complete all as directed by Engineer-in-Charge.
M & L Plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to even and smooth without using extra cement all as specified and directed by Engr-in-charge.
M&L for Plain cement concrete 1:3:6 mix type C2 (using 40 mm graded stone aggregate) in walls or retaining walls, pillars etc., including necessary form work all as specified and directed by Engineer-in-Charge.
M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and directed by Engr-in-charge.
S&F 40 mm dia butterfly Valve, lever operated, conforming to IS 13095 of class PN 1.6, with flanged ends, suitable for connecting with GI Pipe medium grade, with necessary nut-bolts and washers etc including taking down existing unserviceable valve complete with flanges nut - bolts etc., all as specified and directed.
S&F 50 mm dia butterfly Valve, lever operated, conforming to IS 13095 of class PN 1.6, with flanged ends, suitable for connecting with GI Pipe medium grade, with necessary nut-bolts and washers etc including taking down old unserviceable valve complete with flanges nut - bolts etc., all as specified and directed. Make for Item No. 15&16: LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE.
Sub Total of Schedule 'A'
Schedule of Credit (Minus) Rs. 54,950.00 B/F from Ser page No. 23 NOTE: Bidder shall insert credit amount as rate Rs. 54,950.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.
Sub Total of Schedule of Credit
MS MAYA PRAKASH GOEL AND SONS
G K SUTHAR
PRASAD PRADHAN AND SON
JAYSHREE CONCERN
MS BRAHMA CONSTRUCTION
SANJAY MITTAL
RAJU TAMANG
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .