WELCOME MAINT OF VARIOUS OMQS, REPAIR/MAINT OF PERIMETER LIGHTS INCL REPLACEMENT OF UNSERVICEABLE FITTINGS, DAMAGE ELECTRIC CONNECTIONS AND ALLIED WORKS IN BASRA/MES/IN-LIVING AREA AND REPAIR/MAINT OF EMERGENCY BELL, DIFFERENTIAL SIRENS, CRASH BELL

Amount

M&L for preparation of old decorated surfaces of wall by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying one coat of white wash, complete all as specified and directed.

All as per item No 1.00 here-in- before but one coat of white wash on ceiling, soffits of slabs, chajj etc, complete all as specified and directed.

All as per item No 1.00 here-in- before but applying one coat of oil bound distemper on wall, complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of oil bound distemper, complete all as specified and directed.

All as per item No 4.00 here-in- before but on ceiling, complete all as specified and directed.

M & L for complete removal of existing treatment on wall and applying two coats of oil bound distemper over and including 2mm thick wall care putty to achieve smooth finish, complete all as specified and directed

All as per item No 6.00 here-in- before but on ceiling, complete all as specified and directed.

M&L for preparation of old painted surfaces of wood or wood based material and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth, complete all as specified and directed.

All as per item No 8.00 here-in- before but n. exc. 10cm width or girth, complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth, complete all as specified and directed.

All as per item No 10.00 here-in- before but n. exc. 10cm width or girth, complete all as specified and directed.

M & L for preparing old decorated surfaces of wall/chajja by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying one coat of cement base paint, complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall, cornices etc and application of one coat of 100% acrylic exterior emulsion paint (weather coat,1st grade quality) of approved colour, complete all as specified and directed.

M&L for preparation of old surfaces of walls, by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying one coat of plastic emulsion paint (1st grade quality), complete all as specified and directed.

M&L for complete removal of existing treatment of old steel surfaces of any description over 10cm width or grith and applying two coats of aluminium paint (1st grade quality), complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, cornices etc and application of two coats of 100% acrylic exterior emulsion paint (weather coat,1st grade quality) of approved colour over a coat of primer, complete all as specified and directed.

M&L preparation of new or previously untreated wooden surface any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed.

M&L for preparation of new steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.

Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:4), complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces fair and even, complete all as specified and directed.

M & L for rendering 15mm thick (10mm + 5mm) in two coats on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound at top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed

M&L 10mm thick rendering in CM (1:3) as in ceiling, chajja, soffits etc, finished surfaces fair and even, complete all as specified and directed.

Taking down shutter of any description exc 1 & n.exc 2 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc 1 & n.exc 2 Sqm each and refixing in same opening, complete all as specified and directed.

Takiing down chowkat with shutter without taking off shutter from the frame n.exc 1.5 Sqm each, complete all as specified and directed.

Takiing down chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each, complete all as specified and directed.

Taking down aluminium door & window of size exc. 1.0 Sqm but N. exc. 2.0 Sqm and refixed after necessary required repair by replacing its faulty parts to bring its functional condition, complete all as specified and directed. Note : (i) Unit quoted rate shall deemed to be included for handle, roller, locking system required for repair. (ii) Aluminium section & glass panes shall be paid separately)

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. including powder coating (minimum thickness of powder coating 50 micron), complete all as specified and directed.

M&L for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. powder coating of any colour (thickness or powder coating not less than 50 micron), complete all as specified and directed.

Taking down steel window, cutting u/s projected hinge and fixing/welding the box type hinge, handle, stay etc and refixed in the same opening, complete all as specified and directed. (Note : Box type hinge, handle and stay shall measured and paid separately as 'Supply only' under respective items).

Supply only box type hinge for fixing/welding in steel window, complete all as specified and directed.

Supply only stay for fixing / welding steel window, complete all as specified and directed.

Supply only chromium plated steel handle left/right for fixing in steel window, complete all as specified and directed.

Dismantling structural steel work including doors, gates, but excluding framed truss etc., complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, complete all as specified and directed.

All as per item No. 43.00 here-in-before but without glazing bars, complete all as specified and directed.

Steel ventilator with top hung shutter incl hinges, steel peg stay, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips and providing new pins / spring clips, complete all as specified and directed.

S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm. in each pane, complete all as specified and directed.

S&F 3mm thick sheet glass, frosted on one side, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and directed.

M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple in repair including wooden beads, complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple, complete all as specified and directed.

M&L for flat iron fillets for securing wire mesh etc including necessary driling, bolting or rivetting etc comforming to Fe 290 Gde E-165, complete all as specified and directed.

S&F in repair fancy type brass 'magic eye' for doors, complete all as specified and directed.

M &L PCC (1:3: 6) type C1 (using 20mm graded crushed stone aggregate) as in bed plates,filling in MS pressed door/tank frame etc, complete all as specified and directed.

S&F 105X60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc, complete all as specified and directed.

S&F 125X60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc, complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 25mm thick wooden grain PVC celuka ply for shutters of built in cupboards, almirahs, book cases, toilet boxes, racks and kitchen cabinet and similar work fixed with screws/self tapping screws etc fixed in repair complete including required accessory and builder hardware (steel handle, hasp & staple, magnet), complete all as specified and directed.

S&F 18mm thick wooden grain PVC celuka ply fixed in shelves, partitions and shelves of built in cupboards, almirahs, book cases, toilet boxes, racks, pelmet and similar work fixed with screws/self tapping screws etc fixed in repair complete including required accessory and builder hardware, complete all as specified and directed.

Extra over rates of block board or veneered particle board (25 mm thick board) for external teak wood lipping, 6mm thick, fixed with nails, complete all as specified and directed.

Extra over rates of block board or veneered particle board (18mm thick board) for external teak wood lipping, 6mm thick fixed with nails, complete all as specified and directed.

S&F continuous piano hinges, brass, bright finishes, width of flaps 30mm (when open), complete all as specified and directed.

M&L for concealed hinge with integrated dampening/ soft close system including all fixing arrangements for cupboard doors, complete all as specified and directed.

S&F in repair of good quality telescopic channel set for drawer (a) for grocery basket Heavy duty drawer multi-tech high capacity 500 mm long approx (b) For cutlery plain and thali basket, complete all as specified and directed.

S&F 75mm aluminium anodised hasp and staple, safety type and fixed with screws, complete all as specified and directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410W Gde E-250 quality A including dismantling structural steel work including doors,gates but excluding framed truss etc, complete all as specified and directed.

S&F in repair 20mm dia curtain rod mild steel chromium plated, complete all as specified and directed.

S&F CP bracket and other accessories for fixing of 20mm dia curtain rod to wall, complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet used instead of Plain colour PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood board core free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F factory made solid wire gauzed i.e. panel will be of wire gauze PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 900 bent edge & as gap insert for top rail & bottom rail; i.e. panel will be of wire gauge. The wire gauge shall be wrapped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, complete all as specified and directed.

S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F 100mm long aluminium handle, cast type anodised, complete all as specified and directed.

S&F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

M&L 35mm thick 2nd class hardwood factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particale board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

S & F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc., complete all as specified and directed.

S&F 200mm long aluminum anodized barred tower bolts of extruded section, complete all as specified and directed.

S&F 125 mm long aluminium handle cast type anodised ('D' shaped), complete all as specified and directed.

S&F butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.

S&F butt hinges of size 75mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F 50mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles n. exc. 200 Cum each, complete all as specified and directed.

S&F 150mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15mm thick rendering in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing surface in any type, complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 10mm thick screed bed in CM (1:4), complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling in concealed position including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F steel water tubing and connection medium grade 15mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed..

S&F steel water tubing and connection, medium grade, 15mm bore with all fitting fixed concealed to wall or in ceiling complete and making good surfaces with CM (1:3), complete all as specified and directed.

Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F steel water tubing and connection, medium grade, 20mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.

S & F 75mm bore PVC SWR pipe, single socketed, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed.

S & F 110mm bore PVC SWR pipe, single socketed, in any length with rubber ring joint, fixed to wall with and including clamps, complete all as specified and directed.

S&F in repair of 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F in repair of 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) branch pieces, (single Y) equal or unequal, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) branch pieces, (single Y) equal or unequal, complete all as specified and directed.

S&F in repair 15mm bore, fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated, two way, long body, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed.

S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed.

S&F in repair 15mm bore angular stop cock, chromium plated, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges, compelete all as specified and directed.

S&F in repair two way angular stop cock 15mm bore chromium plated coat copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore health faucet with 1.0m tube & hook (branded tube), complete all as specified and as directed.

S&F in repair, CP toilet paper holder, with cover white, box type, white with CP screws, complete all as specified and directed.

S&F in repair 5mm size CP telephonic shower with shower arm 195mm long angular, complete all as specified and directed.

S&F in repair 15mm bore jet spray chromium plated, of standard make, complete all as specified and directed.

S&F in repair long body bib tap 15mm bore, fancy type, cast copper alloy, chromium plated screwed doen, screwed for iron pipe, complete all as specified and directed

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and directed

S&F in repair swivel shower rose 125mm size, brass, chromium plated, with long head arm for fixing with 15mm bore pipe, complete all as specified and directed.

S&F in repair vitreous china squatting pan ,"Orissa pattern" white, size 580x 440 mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe, complete all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 550x 400mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and directed.

Fixing only in repairs wash basins vitreous china (flat back or angle back type) any size including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 250 & n. exc. 500 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on ____" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 500 & n. exc. 1000 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on ____" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

S&F in repair 20mm bore PTMT Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms), complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm), complete all as specified and directed.

S&F in repair waste fittings 32mm bore, brass, chromium plated for wash basins/sink etc with long screwed shanks and fly nuts, flange and bed deal in red lead cement and other end, complete all as specified and directed.

S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repair of 32mm size PVC solid waste pipe for wash hand basin and sink 800mm long, complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle, complete all as specified and directed.

Fixing only in repairs hgh or low level flushing cistern and connections to pipes and fixing of chain and pull, or lever, if any, complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight 15mm-90gms), complete all as specified and directed.

S&F in repair sinks made of stainless steel with draining board 1mm thick with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed.

S&F in repair of swan Neck Sink Mixer chromium plated regular spout T/M (swing spout) fancy type, complete all as specified and directed.

S & F in repair soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair 3-in-1 wall mixer, chromium plated, fancy type, complete all as specified and directed.

S&F in repair central hole basin mixer, chromium plated, fancy type, complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S &F corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 25 cm side with chromium plate bracket guard, complete all as specified and directed.

S&F in repair vitreous china EWC (padestal pattern) white 'P' or 'S' trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and as directed.

S&F in repair plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for pedestal pan, complete all as specified and as directed.

Repairs to concealed stopcock, angular stop cock, bib tap etc with required brass spindle as required and other necessary arrangement / spare parts, complete all as specified and directed. (Note : Spare parts required for repairing shall deemed to e included in the unit quoted rate)

S&F in repairs CP grating 100mm dia with or without waste hole, fixed to floor trap, complete all as specified and directed.

S&F chromium plated, peg set of 5, fixed to wall or doors, complete all as specified and directed.

S&F in repair stainless steel plate rack of size 0.75 x 0.78m made out of 0.65mm stainless steel, complete all as specified and directed.

S&F rubberised dood cill, width exc 30mm but n. exc. 50mm, complete all as specified and directed.

S & F in repairs, 15mm bore pillar taps, of PTMT any colour high pressure screwed iron for iron pipes and fixed 9Min Wt- 110gms), complete all as specified and directed.

S & F in repairs, 15 mm bore, stop valves standard of PTMT any colour high pressure screwed for iron pipes and fixed (Min Wt 15mm-90 Grams), complete all as specified and directed.

S & F in repairs, 15mm bore, angle stop valves of PTMT any colour high pressure screwed for iron pipes and fixed (Min Wt 15mm-90 Grams), complete all as specified and directed.

M&L repair to broken/damaged RCC chajjas by making good with PCC (1:2:4) type B1 or CM (1:3) rendering 15mm thick mixed with water proofing compound to top & sides and soffits in CM (1:4) including necessary form work, reinforecement work if required including demolition of broken/loose PCC or taking down old plaster all complete at any position and upto 10mtr height from ground, complete all as specified and directed.

Taking out existing unserviceable/ defective light fitting / high bay light fitting of any wattage from poles/walls/ high mast (including taking down of high mast fitting), dismantling the complete fittings of checking out the defects, trace out damage/ unserviceable parts like driver, wire, led lamp etc and clean thoroughly the complete set and re-fixing in its original position after replacing defective parts including testing, complete all as specified and directed. Note :- (i) Any minor item like nuts, bolts, clamps, washers and wires for connection is required to make the fitting serviceable shall deemed to be included in the unit quoted rate (ii) Defective parts replaced shall be paid separately under respective items as 'supply only'.

S&F 40mm nominal bore GI pipe brackets made out of medium grade pipe of required length not less than 1.20m consisting mounting brackets made out of mild steel FI 40x6mm required shape ( two Nos per GI pipe brackets ) duly fitted with 4 Nos Mild steel nuts, bolts and washers in walls /poles etc. and painting with two coats of synthetic enamelled paint over one coat of red oxide zinc chrome primer including taking out existing unserviceable GI braket of any shape/size from pole, complete all as specified and directed.

S&F astronomical time switch in existing street light timer panel for switching on /off lights and other electric devices according to the susrise / sunset times based on the entered location or location coordinates including taking dwon old unserviceable time switch, complete all as specified and directed.

S&F in repair contactor TP, 40 Amp, 415 volts, complete all as specified and directed. (Make : L&T Cat Part No. CS 94190 or equivalent model in Legrand/ABB/Schneider)

S&F in repair of MCBs, single pole, 6 to 32 Amp, "C" series, 10 KA, 240Volt, complete all as specified and directed.

M & L for cleaning of creepers from electric pole, junction box and street light including replacement of cable gland, lugs, MCBs, tightening of earthing, orientation of street light bracket properly, complete all as specified and directed. Note : (i) Cable gland, lugs / thimble shall deemed to be included in the unit quoted rate. (ii) MCBs shall be measured and paid seperately.

Servicing of up-down function of high mast light including greesing, oiling, tightening of moving mechanism, replacement of minor parts, including replacement of control wiring for electric auto up-down function etc, complete all as specifed and directed. (Note: Cost of minor parts included control wiring required for servicing shall deemed to be included in the unit quoted rate.)

M & L for disconnecting burnt end or portion of UG cable, removing the cable from loop including necessary excvation and earth work, relaying and reconnecting the cable by removing burnt portion of cable and preparing fresh terminal for cable of cross sectional area 10 Sqmm 2 core to 95 Sqmm 3.5 core of LT cable to pole, main switch, LT panel etc including taking down unserviceable street light fittings, complete all as specified and directed.

S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including taking down unserviceable street light fittings, complete all as specified and directed.

S&F LED street light fitting 70/72 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including taking down unserviceable street light fittings, complete all as specified and directed.

S&F LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant made out od pressure die cast aluminium housing with toughened glass and high power LED and secondary lenses, System efficacy > 110 LPM and 10 KV SPD included complete with driver and lamp complete with polycarbonate junction box and connecting wire copper 2.5 Sqmm 3 core up to junction box including taking down unserviceable flood light fittings, complete all as specified and directed.

S&F of LED type integral aviation obstruction light (heavy duty) IP65, single light fitting comprising of Die-cast aluminum housing with Red polycarbonate dome for better illumination, Integral driver, Supper flux 5mm 302 Nos LEDs incorporated. powder coated aluminium housing with polycarbonate enclosure including taking down unserviceable aviation light fitting, complete all as specified and directed. (Make : Bajaj model No. BGAV 302 LED or equivalent model in philips/Kheraj)

S&F in repair PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 1.5 Sqmm for providing necessary electrical connection from junction box to light fittings including with suitable size copper lugs including taking down existing cable, complete all as specified and directed.

S&F in repair KIOSK box weather proof made out of PVC and including one piece mounted SMC base and door pole mounted hinged door size 333 x 233 x 200mm out side and 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp and 10 Amp MCB for controlling the street light fitting including FI clamps 30 x 4mm with necessary MS nuts bolts and washer including embossing/painting of danger notice of size not less than 10cm x 7.5 cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body, complete all as specified and directed.

M&L for earthing & testing complete with GI earth plate electrode 60cmX60cmX6mm thick buried directly in ground vertically to a depth not less than 2.25mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including earth lead wire 4mm dia by means of bolts, nuts and check nuts and washers etc. made of GI & connected to earthing test point and earth dolly all as shown in elect plate No 3 of SSR Pt I including all necessary earth work, excavation, PCC chamber, (1:2:4) B1 & RCC (1:2:4) B1 chamber cover with suitable reinforcement with handle including 15mm bore GI light grade protection pipe upto 7.5m length & 20mm bore GI medium grade watering pipe and wire mesh, funnel, char coal dust, common salt, wire mesh etc. including taking down unserviceable earthing of any description, complete all as specified and directed. (Note : GI wire from earth pit to panel / pole shall deemed to be included in in the unit quoted rate)

Supply only OEM LED driver suitable for 45-50 Watts LED outdoor (Flood light/Street Light) luminaries, complete all as specified and directed.

Supply only OEM LED driver suitable for 60 Watts LED outdoor (Flood light / Street Light) luminaries, complete all as specified and directed.

Supply only OEM LED driver suitable for 72 - 80 Watts LED outdoor (Flood light / Street Light) luminaries, complete all as specified and directed.

M&L for painting steel tubular poles, 8.5 to 9.0 meter in height above GL including cross arms & bracings on existing surface after cleaning and removing dust, rust & dirt with one coat of redoxide primer and two coat of aluminium paint and painting with black & white alternate strips of 30cm each externally from ground level up to 1.5 mtr with synthetic enamel paint, numbering of pole (MES/SL-Number) and white wash on pole coping, complete all as specified and directed.

Supply and laying or fixing or passing through pipe PVC insulated and PVC sheathed with electolytic grade annealed copper conductor suitable upto 1100 volts grade confirming IS 694 size 2.5 Sqmm 7 core including taking down unserviceable cable, complete all as specified and directed.

S&F in repair LED based traffic signal 'Go' or 'No Go' (bicolour) light of size 300mm dia 230 V AC, 50 Hz and having polycarbonate body suitable for extreme condition including fixing poles and clamps including taking down unserviceable cable, complete all as specified and directed.

S&F in repair electronic type single tone siren AC, 220 volts of range not less than 1.0 KM including control box with control wiring from junction box to siren with suitable size copper conductor cable as per manufacturer's instruction, complete all as specified and directed.

S&F horizontal type submersible pump heavy duty of capacity 0.75 HP complete for drainage of water out of sump well with control wiring from controller for auto operation including taking down unserviceable pump and deposited to AGE E/M store yard, complete all as specified and directed.

S&F audio visual alarm with revolving flasher LED lights (red colour), 220 V AC including mounting arrangement, complete all as specified and directed.

S&F in repair indoor type LED display board/LED scrolling display board 16 x 128 (size of LED display not less than 16 x 128cm) for displaying the traffic signal 'Go' or 'No Go' at ATC control room with necessary fixing arrngement on wall, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core including taking down old unserviceable UG cable of any description, complete all as specified and directed.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in deep for foundation etc. or for shaft, wells, cesspits, manhole, pair house etc. n. exc. 10 Sqm on plan and getting out in any type of soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

M & L for boring of holes under road, pavement, hard standing by using trenchless technology, using ultra sounding technique and necessary machine including providing HDPE/DWC pipe of 50mm bore suitable for 0.4 mpa working pressure, complete all as specified and directed.

Supply and laying in trenches/fixed on wall 50mm bore GI tubing, light grade, with necessary fittings such as bend, tee, elbow etc complete for protection of LT UG cable, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

S & F in repair junction box made from SMC/FRP sheet ready made of size 350X 250 X138mm with aluminium bus bar of 100 Amp capacity for RYB and for neutral made in suitable size fixed inside the junction box with necessary supporting insulators, fixed on hylem sheet, MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete , entire assembly fixed to pole/wall with MS clamp 25 X 5mm and nuts & bolts, or inside the copping of pole/post top including MCB SP 6 Amp 10 KA 'C' series 240 V - 1 No, with suitable size copper lugs for connecting cables from junction box to fittings, complete all as specified and dirtected.

Note: An amount of Rs.79,005.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. VINITA CONSTRUCTION

M/S P K AGARWALA

M/S MANODEEP CONSTRUCTION

M/S ANNI ENTERPRISE

M/S ANIL KUMAR BAUL

CONSTRUCTION SHELTER