Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.2 LAccepted-AOC 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹77.7 L+₹14.2 L (22.3%)Rejected-Finance | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹77.8 L+₹14.2 L (22.4%)Rejected-Finance | L3 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.4 L
Closing Date
6 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR MAINT OF MOTORISED/MANUAL ROLLING SHUTTER IN ZONE 1 2 3 AT ND UNDER GE (NW) KUNJALI COLABA MUMBAI
2023_MES_578039_1
8543/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Kunjali
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) KUNJALI
₹1.4 L
Yes
31 Mar 2023
30 Jan 2023
8 Mar 2023
30 Jan 2023
6 Mar 2023
20 Feb 2023
30 Jan 2023 - 18 Feb 2023
Amount
Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed by Engineer-in-Charge.
All as per Srl Item No.1 here in before but area of shutters exc 10 sqm and n.exc 20 sqm each complete all as specified and directed by Engineer-in-Charge.
All as per Srl Item No.1 here in before but area of shutter exc 20sqm each complete all as specified and directed by Engineer-in-Charge. Note :- Any parts required for srl item No. 1, 2 & 3 shall be measured and paid for separately
Supply and fixing in repair factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair factory fabricated mild steel (hardened) helical wire spring of size 400mm long, 80mm dia to match with existing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs factory fabricated mild steel (hardened) helical wire spring of size 600mm long, 80mm dia to match with existing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs factory fabricated new guide,side brackets, of rolling shutter made out of mimimum 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing factory fabricated mild steel of grade Fe-410-0 or Fe-310-0, bottom lock plate riveted and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing rubber sponge gasket of 20mm thick and 40mm width fixed with and including approved adhesive complete all as specified and directed by Engineer-in-Charge.
Supply and fixing factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters as fixed in repairs complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair mild steel pressed beval handles 150mm long, oval type, enamelled black complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs mild steel safety lever lock with 4 levers for rolling shutters complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for greasing and easing in position of mild steel rolling shutters of area n.exc 10sqm each for full movement and for easy operation for shutters complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for greasing and easing in position of mild steel rolling shutters of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters complete all as specified and directed by Engineer-in-Charge.
Material and labour for greasing and easing in position of mild steel rolling shutters of area exc 20sqm each for full movement and for easy operation for shutters complete all as specified and directed by Engineer-in-Charge. Note for item no. 16 to 18:- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
Material and labour for preparing new or previously untreated surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of aluminium red oxide primer complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparing old painted surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparing old painted surface of any decription over 10cm in width or girth and applying one coats of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs plain aluminium sheeting, alloy 31000H4, 1.25mm thick as in covering to door shutters et, cut to size, edge beads punched including rivets with plain 40mm joints including bending turning up, mitered angles, stopped ends, outlets etc, as required complete all as specified and directed by Engineer-in-Charge.
Extra for wicket door including 4 lever mild steel safety lock lockable from both inside and outside (area of wicket door to be measured) complete all as specified and directed by Engineer-in-Charge.
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.
Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W-(Gde-E-250) quality A complete all as specified and directed by Engineer-in-Charge.
All as per Item No 28 above but MS Plate (Plain or Chequred) complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for rolled mild steel sctions of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc and similar work complete all as specified and directed by Engineer-in-Charge.
Supply and fixing mild steel framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs collapsible steel gates, top hungs consisting of channel pickets, provided flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfast and brackets complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs rolling shutter with/without ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, gear operated type with chain wheel and hand chain and erected in position as directed push pull or manual complete all as specified and directed by Engineer-in-Charge.
Material and labour for Chipping , removing carefullly concrete work by low impact hammer ,breakar without damaging the structure & cleaning and disposal of debries out side the premises etc. complete as directed. Hard concrete should not be removed by force complete all as specified and directed by Engineer-in-Charge.
Material and labour for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry complete all as specified and directed by Engineer-in-Charge.
Material and labour for applying two coats of Epoy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be by brush. Epoxy primer for steel of make / brand - Corroseal-ZR of Krishna Conchem or Dr. Fixit Epoxy zinc primer complete all as specified and directed by Engineer-in-Charge.
Material and labour for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or as approved by GE complete all as specified and directed by Engineer-in-Charge.
Material and labour for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and directed by Engineer-in-Charge.
Material and labour for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit complete all as specified and directed by Engineer-in-Charge.
Material and labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.
Material and labour for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency ,Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd. complete all as specified and directed by Engineer-in-Charge.
Material and labour for Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materialas:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting:Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/Protectsil CIT or Ferogard 903. Maintain desired pressure in the gun by air compressor; maintain the pressureat exit(2 to 3kg/cm2) by monitoring pressure guage at exit.Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles complete all as specified and directed by Engineer-in-Charge.
Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness of M-35 Grade with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed by Engineer-in-Charge.
Material and labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 80mm thickness of Grade M-40 with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed by Engineer-in-Charge.
Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed by Engineer-in-Charge.
Material and labour brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for complete all as specified and directed by Engineer-in-Charge.
Material and Labour for RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, walls deck slabs in shelves and the like including all necessary form work complete all as specified and directed by Engineer-in-Charge.
Material and labour Mild steel TMT bars 10mm dia and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed by Engineer-in-Charge.
All as per item No 51 above but 6 to 8mm dia bars as in stirrups complete all as specified and directed by Engineer-in-Charge.
Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish with 3% weight of cement water proofing compound complete all as specified. (note : Water proofing compound shall be measured and paid seperately complete all as specified and directed by Engineer-in-Charge.
Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.
Cleaning of covered drains of sectional area exc 0.05 sqm but n.exc 0.15 Sqm by using suitable device for removing blockage of line, mud, silt and other debris and removal of obtained spoils outside MD land, including taking precautionary and safety measures etc complete all as specified and directed by Engineer-in-Charge.
All as item No 55 above but section area exc 0.24 sqm complete all as specified and directed by Engineer-in-Charge.
Removing excavated/demolised material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil complete all as specified and directed by Engineer-in-Charge.
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for complete all as specified and directed by Engineer-in-Charge.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 of flexural strength of 40Kg/Square in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for PCC 1:2:4 type B2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc all as specified and directed. (Rate inclusive of necessary formwork and suitable arrangements) complete all as specified and directed by Engineer-in-Charge.
Material and labour cement concrete type B0, 1:2:4 (12.5mm graded stone aggregate) in floor kerbs of mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge.
Cleaning and disilting of any type of drain , removing of silt, muds, sludge and other waste material with mannual or mechanical instrument in trucks cover with tarpaulin to outside of MD land all as per existing rules and regulation etc and matching the existing surface complete all as specified and directed by Engineer-in-Charge.
Material and labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof at any height including scaffolding complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces at any height including scaffolding complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation and applying two coat of indigo paint on Chequered tiles/Interlocking paver blocks etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of old surfaces of any description and applying two coats of acrylic (antifungal) exterior grade paint on Asbestos/Glavalume sheets/mangalore pattern tiles including necessary scaffolding & removing of vegetation etc complete all as specified and directed by Engineer-in-Charge.
Satyanarayan Trading Co.
jalandhara construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .