REPAIR MAINTENANCE WORK AT FILTRATION PLANT EM POWER HOUSE INSTALATIONS MES OFFICE AND STORE IN THE AREA OF AGE BR II UNDER GE MAINT INF SCHOOL MHOW

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 Sqm complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 Sqm each complete all as specified and directed.

S&F of second class hard wood plain, solid, straight chawkats and frames, wrought, framed rabated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.

S&F of mild steel work angle or flat iron section in hold fasts for door/window chowkats including two coats of red oxide primer complete all as specified and directed.

S&F of plain, framed, panalled factory made shutters approved quality second class hard wood 35mm thick (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per I.S.1003 (Part-I) kiln seasoned and chemically pressure treated, fixed with screws etc. complete all as specified and directed.

S&F of 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) complete all as specified and directed.

S & F of 30 mm thick factory made, 2nd class hard wood glazed and skeleton shutters, open rebeated and prepared to received glass, gauzed, with sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (b) for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F of Solid PVC frame (Single Rebated) of size 60mmX30mm made out of solid PVC foam with homogeneous fine cellular struture having smooth outer integral skin with suitable metal stifner and fixed with 100 X 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note:- Door frame shall be water proof, termite proof, elegant and should be should have excellent screws holding strengh to fix hinges and hold doors properly for a long life) complete all as per manufacture instruction and directed by Engr-in-charge.Make:- Rajshree co.

S&F of factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40X20X19 of MS pipe as stiffer & supplying & fixing in frame at site as per specification & drawing complete all as per manufacture instruction and directed by Engr-in-charge.Make:- Rajshree co.

S&F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of mild steel sliding door bolts 250 mm long, stove enameled black with bright bolt and staple plate including necessary fixing bolts & nuts complete all as specified and directed.

S&F of stainless steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.

S&F of stainless steel butt hinges 75 mm size cold rolled medium weight and fixed complete all as specified and directed.

S&F of Aluminium anodised barrel tower bolts of extruded section, 150mm long complete all as specified and directed.

S&F of Aluminium anodised barrel tower bolts of extruded section, 200mm long complete all as specified and directed.

S&F of Extruded aluminium alloy handles fabricated type anodised 100 mm sizecomplete all as specified and directed.

S&F of Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed.

M&L for preparation of new wooden surfaces any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F in repairs of 12mm thick perforated particle board / tile for insulation and acoustic purposes , 600 x 600 mm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed.

Taking down existing roof treatment of any description and in any position including removal from out side of MD land etc complete all as specified and directed.

M & L for PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified and directed. Note:- Liquid WPC shall be measured and paid separately.

M&L for Cutting out cracks to V section in existing roofs,brushing neat cement slurry with cement and sand slurry (1:3) per sqm mixed with chemical compound super latex of Pidilite Industries Ltd, or SBR Latex of STP Ltd as per manufacturers instructions complete all as specified and directed

M&L for water proofing treatment to non accessible roof and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface and over 10 mm thick plaster CM (1:4) (ii) Applying a coat of bitumen primer @ 1.2Kg/Sqm and primer shall be allowed to dry over night. (iii) Laying APP based modified water proofing membrane of weight not less than 3kg per sqm and thickness not less than 3 mm, with 100mm overlaps, sealed and bonded to the surface by 'torchon' method (iv) Applying two coat of bituminous based aluminum painting @ 0.15 kg/Sqm each coat on water proofing treatment with preparation of surfaces complete all as specified and directed at site.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plaster on wall (any number of layers) by scrapping with steel scrapper or any other means and applying two coat of oil emulsion distemper over one coat of primer including one coat JK/BIRLA white wall care putty complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound (liquid) including neceaary scafolding at any position, any height (upto 15Mtr) complete all as specified and directed. (Note:WPC (liquid) shall be measured and paid separetly)

Supply only liquid water proofing compound complete all as specified and directed..

M&L for rendering 5mm thick in CM 1:3 on ceiling on any faces of brick or concrete surface finish the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of ceiling and apply two coats of oil emulsion distember over a coat of primer complete complete all as specified and directed.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc. complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed

Preparation of new plastered surface and apply two coat of cement base paint over a coat of primer on wall complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) unreinforced complete all as specified and directed.

M & L for 75 mm thick cement concrete (1:3:6), type C-2, using 40 mm graded stone aggregate as in floor/plinth protection, finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler/filler boards complete all as specified and directed.

Dismantling of any type of tiles, pavement, including cement mortar / sand cusioning,stone slabs and tiles of any description or thickness in floors,aprons etc laid dry or laid dry and pointed removing serviceable tile, keep aside for refixing and rubbish off the premises, etc complete all as specified and directed.

M&L for 75 mm thick PCC(1:4:8) type D-2 using 40mm graded stone aggregateas as in sub base of floor (40 mm graded stone aggregate), complete all as specified and directed.

M&L for machine Pressed Precast concrete glossy interlocking Paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness M-40 grade with grey cement and pigment including 25 mm thick sand coushioning complete all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 30mm thick grid cushion complete all as specified and directed.

M&L for expect tiles (refixing obtain from demolition) of 80mm thick machine pressed precast interlocking paver block (glossy finished) with grey cement with pigment conferming to IS 15658-2006 of M-40 grade ,laid dry & jionts filled with grid cushion and shape,colour and pattern as approved by GE complete all as specified and directed..

Dismantling floor,hearth or wall tiling incl cement mortar bedding/ backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..

M&L for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.11 Sqm but n. exc 0.18 Sqm, over & including 20mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm size 5 to 6mm thick in dados or skirting over rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles complete all as specified and directed.

Material and labour for Chequered cement concrete glossy tiles (25Cm x 25 Cm) x 25mm thick over and including 15mm thick screed bed in CM (1:6), set, jointed with grey cement and pigments and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for 40 mm thick plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate,as in floor, finish the surfaces even and smooth with using extra cement complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over and including 15mm thick screed bed in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed and specified.

M&L for for kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar laid over and including 10mm thick cement screed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F of sheet glass ordinary quality, 3 mm thick and glazing with oil putty/wooden beads in squars n. exc 0.5 sqm each complete all as specified and directed.

S&F of Figured glass, pinhead type , 3 mm thick and glazing with oil putty/wooden beads in squars n. exc 0.5 sqm each pane complete all as specified and directed.

Dismantling water tanks of exc.250 ltr.and not exc.500 ltr capacity and removing etc completed all as specified and directed at site.

Dismantling water tanks of exc.500 ltr.and not exc.1000 ltr capacity and removing etc completed all as specified and directed at site.

S&F of 500 litres tripple layer white colour anti-bacterials rotational moulded polyethylene water storage tanks (three layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I completed all as specified and directed at site.

S&F of 1000 litres tripple layer white colour anti-bacterials rotational moulded polyethylene water storage tanks (three layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I completed all as specified and directed at site.

S&F of 25 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) completed all as specified and directed at site.

S&F of 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) completed all as specified and directed at site.

S&F in repairs of Vetreous china wash down water closet, Orissa pattern, white, size 580 x 440mm with integral foot rests complete all as specified and directed.

Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing complete all as specified and directed .

All as per item no 60 above but 20mm dia complete all as specified and as directed.

All as per item no above but 25mm dia complete all as specified and as directed.

Refixing 15 mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20 mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 25 mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F of steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm dia of pipes complete all as specified and as directed.

All as per item no 66 above but 20mm dia of pipe complete all as specified and as directed.

All as per item no 66 above but 25mm dia of pipe complete all as specified and as directed.

S&F in repair of 15 mm dia of pipe in gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed completed all as specified and directed at site.

S&F in repair of 20 mm dia of pipe in gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed completed all as specified and directed at site.

S&F in repair for 25 mm dia of pipe in gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed completed all as specified and directed at site.

S&F in repairs of vitreous china Wash hand basin flat back, size (550 x 450)mm white excluding pillar taps & waste pipe but including Waste coupling CP and fixing brackets complete all as specified and directed.

S&Fin repairs of vitreous china bowl urinal flat back of size (465 x 355 x 265) mm, including PVC down waste pipe, fixing plugs etc and fix to walls and connect to existing flush systems complete all as specified and directed.

S&F in repairs of PVC low level flushing cistern 10 ltrs capacity, white with all fitting and fixtures including brackets and 32mm bore PVC flush pipe complete all as specified and directed.

S&F in repairs of PVC connections, 450 mm long with brass CP/PTMT nuts suitable for connecting 15 mm bore pipes, superior quality complete all as specified and directed.

S&F in repairs of bib tap cast copper alloy with chromium plated crutch or butterfly handle, screwed down, screwed for iron pipes 15mm bore,complete all as specified and directed.

S&F in repairs of Pillar tap 15mm bore, cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete.

S&F in repairs of stop valves 15mm bore, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

S&F in repairs of sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs of Stainless steel grating dome 125mm dia with or without waste holes as required complete all as specified and directed..

Dismantling Asbestos cement (corrugated, semi corrugated.etc) sheets in roof covering complete all as specified and directed. .

Dismantling mild steel work of any description in any position complete all as specified and directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.

S & F of 0.50 mm thick (Total coated thickness) pre-colour coated Galvalume/ Zinkalume tiles profile sheet as in roof, wall cladding, north light curves, valley gutter ridge etc having crest depth 28-30mm at a pitch of 195-250 mm and having 2 ribs in between for addition strength fixed with zink coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid slope complete all as specified and directed.

S&F of steel hollow steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding door fixed with angle cleat or other connecting plates etc complete conforming to IS-4923-1997 of FE 410-W (Gde-E-250) quality A complete all as specified and as directed

S&F in repair of 2mm thick fibre glass reinforced translucent plain green sheeting with proper side lap fixed with coach screw and washer in vertical cladding, wall etc. complete all as specified and directed at site.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

M&L in repair roof trusses (framed), trussed,purlins,crane gantries,rails and fastenings (Beam,Tee,Angle,Channel or flat sections) including distance pieces,cleat etc. complete all as specified and as directed

S&F of rolled mild steel plates (plain or chequered) thickness 6 mm ,welded on channels, without any attachment conforming to Fe-290 Gde-E-165 complete all as specified and as directed

M&L for Running welding in repairs thickness of metal to be welded n.exc 6mm complete all as specified and directed.

Roughening surfaces of old RCC chajjas,Sundrops/fecia cracks,ceiling,wall etc.by picking, sweeping clean and washing down with water to remove dust, etc. at any height upto 25 mtr with proper scaffolding arranged etc. including dubbing plaster average 10 mm thick CM (1:4) (required places used expandable wire mesh jali) after that making good by rendering 5 mm thickCM (1:4) plaster etc complete all as specified and directed at site by Engr-in-charge. Note:- Expandable wire mesh shall be measured and paid seperately

Supply only for expendable wire mesh netting/metal in avaible size weight per squre metre n.exc. 4 kg etc.binding on walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete at any height upto 25 mtr all as specified and directed at site by Engr-in-charge.

M&L for pressure grouting with cement mortar with mechanical pressure through nozzles HD PVC 10 CM long 25mm dia to stop cracks /leakagesand seepage from wall floor nozzles shall be fixed at 1 mt c/c in stagered manner and CM (1:1) mixed with WPC shall be filled with pressure to stop leakage (seepage in croaks, concret, walls or floor) till rejection finishing the nozzles by concrete mix with appoxy after treatment including taking down plaster height upto 25 mtr complete all as specified and directed at site by Engr in Charge.

Dismantling fencing wire mesh, any type etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section,Posts embedded in including taking out embedded portion and making good disturbed ground Concrete, brick work, masonry, etc.complete all as specified and directed.

Excavating in post holes hard/dense soil(or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface etc complete all as specified and directed at site.

M&L for Plain Cement concrete(1:3:6) type C-2 using 40mm graded stone aggregate as in in foundations, filling and mass concrete etc complete all as specified and directed at site.

S&F for mild steel works as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed at site.

S&Fof Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed at site.

S&F of Mild steel bolts, exc 11 but n. exc 15 and 75 mm long purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc.10cm long dia 11 to 15 mm etc complete all as specified and directed at site.

S&F of framed work such as grills, gate, gratings, etc., with ends of bars shouldered and/or riveted, butt welded, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290,Gde-E-165 for portions framed and hung as gates,including pintle hindes,stops,etc completed all as specified and directed at site.

Supply only for Chain link MS galvanised fencing,any size or type etc complete all as specified and directed at site.

Fixing only chain link fencing including line wire any mesh size and any type of standard rail s staining bolt etc including provision of binding wire etc complete all as specified and directed at site.

S&F in repair of Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified and directed. NOTE: (each line wire to be measured)

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and as directed

S&F of true horizonal level 595x595x8mm false ceiling fully perforated tile system manufactured by M/s Ramco Industries or equivalent including GI snap grid of size (600x600)mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm having 0.27mm gauge at every 1200mm, centre to centre maximum and rotary stitched cross tee of size 24x 32mm, having 0.25mm gauge at 1200mm c/c. Wall angle of size 19x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI wire. The board to be finished with two coat of OBD over coat of primer to all side complete all as specified and directed.

Preparation of old surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coat of exterior weather proof water base emulsion paint white/coloured etc at any height upto 25 mtr all as specified and directed by Engr-in-Charge

Preparation of Newly plaster surfaces of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured etc. at any height upto 25 mtr complete all as specified and directed.

Preparation of old steel surfaces of trusses,purlin etc. including scraping down,Smoke spot, moss, efflorescent salts, etc. and applying two coat of anti acid paint/anti corrosive paint over a prepared steel surfaces etc complete at any height upto 25 mtr complete all as specified and directed.

M/S Parikshit Sharma