REPAIR/MAINT OF LT CABLES, LT PANELS, STREET LIGHT , INTERNAL ELETRIC SUPPLY SYSTEM (DAY TO DAY MANIT) AND DG SETS AT DSCC BHOPAL

Amount

Excavation in trenches n.exc 1.50m wide and n exc 1.50m in depth and getting out in soft/loose soil for laying cables, erection of poles complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc. 25 cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil n.exc 50m and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and laying sand cushioning for the purpose intrenches and laying of cables in duct/trench including and consiolidation complete all as specified and directed.

S&F Sub-Class B Brick, well burnt, laid breadth-wise along the length of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections including Bricks, GI Pipes, etc. of any descriptions, laid in Trenches and/or fixing with Walls/Poles including Segregating of Serviceable Materials viz Bricks, Cables, GI Pipes, etc. and keep in Safe custody for re-use,complete all as specified and directed. (NOTE : Earth Work shall be Measured and Paid for separately under relevant Items).

Relaying UG Cable (Serviceable Cable obtained from 06 here-in-before) of any size or any description after carry out repair such as joining with Epoxy Joint and making Connection by using Lugs and Testing, complete all as specified and as directed. NOTE : Earthwork, Cable Protection Pipe, Cable Joint, Mild Steel Clamps, Nuts & Bolts, etc. for fixing of Cable Protection Pipe with Pole, Wall, etc. shall be Measured and Paid separately under relevant Items).

Supply and replace in repairs, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade laid in trenches/floor or fixed on wall/pole including brass compression cable gland, terminal lug etc complete all as specified for the following.

50 Sqmm 3.5 Core

95 Sqmm 3.5 Core

25 Sqmm 3.5 Core

Supply & fixing MCCB, suitable for rotary handle TYPE 440 volt AC, 50 Hz, 3 pole, rupturing capacity 35 KA of capacity 160 Amps. Make-Legrand/L&T/Merlin.

All as per item No. 9.00 but 250 Amps 36 KA

All as per item No. 9.00 but 400 Amps 36 KA

M&L for Straight Through Joints (Epoxy) Cable Joint Kit including Jointing Materials for making Joints of UG Electric Cable 1100 Volt Grade Heavy Duty with PVC/XLPE insulated Aluminium Stranded Conductor, Nominal Cross-Sectional area from 25 Sqmm upto 50 Sqmm, 3½ Core and Testing complete all as specified and as directed.

M&L for Straight Through Joints (Epoxy) Cable Joint Kit including Jointing Materials for making Joints of UG Electric Cable 1100 Volt Grade Heavy Duty with PVC/XLPE insulated Aluminium Stranded Conductor, Nominal Cross-Sectional area from 70 Sqmm upto 95 Sqmm, 3½ Core and Testing complete all as specified and as directed.

M&L for Straight Through Joints (Epoxy) Cable Joint Kit including Jointing Materials for making Joints of UG Electric Cable 1100 Volt Grade Heavy Duty with PVC/XLPE insulated Aluminium Stranded Conductor, nominal Cross-Sectional area from 185 Sqmm but upto. 300 Sqmm, 3½ Core and Testing complete all as specified and as directed.

M&L for indoor/Outdoor end terminations (Epoxy) Cable Joint Kit heat shinkable including Jointing Materials for making Joints of UG Electric Cable 1100 Volt Grade Heavy Duty with PVC/XLPE insulated Aluminium Stranded Conductor, nominal Cross-Sectional area from 185 Sqmm upto 300 Sqmm, 3½ Core and Testing complete all as specified and as directed.

M&L for indoor/outdoor end terminations Joints kit (Epoxy) Cable Joint Kit including Jointing Materials for making Joints of UG Electric Cable 1100 Volt Grade Heavy Duty with PVC/XLPE insulated Aluminium Stranded Conductor, nominal Cross-Sectional area from 70 Sqmm upto 95 Sqmm, 3½ Core and Testing complete all as specified and as directed.

S&L in repair service connection,1100 volts grade,heavy duty cable with PVC insulated,multistranded aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed,flat or circular of size 2 core x 6 sqmm, complete all as specified and as directed.

Supplying and fixing in repair service connection,1100 volts grade,heavy duty cable with PVC insulated,multistranded aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed,flat or circular of size 2 core x 10 sqmm, complete all as specified and as directed.

M & L for replacement flood light mounted on high mast light of 120 Watt energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium iP66, suitable for highlighting architectural facade and general purpose lighting,complete all as directed specified and directed.

Supply and fix in repairs of Integral pole mounted decorative LED Post-top IP65 elegantly designed die-cast aluminium housing and high grade aluminum heat sink for efficient thermal management, studiness and excellent corrosion resistance. 4 nos. die-cast aluminium arms are provided to support the housing. Powder coated black after shochromate treatment. 45 watt, LED post top with IP65 protection, complete all as specified and directed.

M & L for replacement of street light energy saving & environmental friendly long life LED street light of cap 70 W made up of pressure die-cast aluminium roadway luminaire with high efficient LED lighting source with toughened glass having IP 66 protection and impact resistance of IK07, after taking down the old unserviceable one complete all as directed specified and directed.

M&L for scratching out old bubbled paint, finishing the surface two coats of black with synthetic enamel paint of 1st quality to street light pole of any height 4.0 mtr , all as per site including 30 cm height from base to pole to be painted with mint blue synthetic enamel above embedded level, including pole number writting with black colour enamel paint on white colour circular base) with two coat of lime wash on pole coping all as directed by Engr-in-charge.

M&L for scratching out old bubbled paint, finishing the surface with powder coated (smoke green) two coats synthetic enamele paint of 1st quality to LT panels at various location in DSCC campus including Panel number writting with blue colour enamel paint all as directed by Engr-in-charge.

M&L for disconnect the elect supply including taking out and refixing in position, connecting, commissioning after repair/replacement of unserviceable parts of ACB’s of capacity 1000/800A as follows :- Make : Merlin (as per existing). Note: Spare parts to be included as per requirement. (i) Replacement of castle lock (Z244C) as existing-02 nos (ii) Replacement of Gear mother (ZMCH) as existing-02 nos (iii) Replacement of earth fault relay (ZEFR) 415 V, AC 50 HZ, 3 phase, 3 wire system-02 nos (iv) Replacement of auxiliary contact (601) as per existing make and rating-02 nos

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6.3mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground level with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No.5 of SSR part I and earth wire protected by galvanized pipe light grade 25 mm bore and thorugh test point including necessary earth work and excavation in any type of strata, and repair to GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm kdia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed and testing on completion.

M & L for GI tube light grade laid in trenches or fixed on wall, floor or on pole with aluminium camp of size 25 x 3mm of suitable length with bolts, nuts and washer of suitable size for cable protection complete all as specified for the following size

50 mm bore

40 mm bore

25 mm bore

Disconnection, taking down, dismantling including necessary testing for Voltage stabilizer 25 KVA capacity and necessary repair work/labour :-

Note for item No 28.00 (a) Opening top cover carefully without damaging any part and detecting the fault/defects in core by testing. (b) Disconnecting the defective coil and rewinding the same with suitable guage of super enamelled copper conductor as per the existing size for the limbs as required at site. (c) Cleaning, decarbonising, and dislodging of inner chamber , cleaning all terminal points and leads and replacement of unserviceable nut bolt, washers, studs,spindles, refilling the container with transformer oil and replacement of gasket complete. (d) Replacement of defective studs complete.

(e) Preparation of surface area of voltage stabiliser by complete removing of existing painting and repainting of stabiliser complete (after reassembling) with two coats of synthetic enamel paint over a coat of red oxide primer( using spray machine) all as specified and directed( colour of paint to be as per existing colour code norms including necessary Denting/welding & Writing MES No & SM No). (f) Reassembling,reinstallation at original location or as directed including restoration of electrical connection,commisioning and testing on load complete all as specified and as directed.

Supply only the following defective spares of OEM make for the voltage stabiliser of any capacity complete all as specified and directed:-

Push button switch

Auto manual switch

Analog ammeters, with CT, 0-100 Amps square type, size 96 x 96 sqm, surface mounting type, complete all as specified and directed

(d) Analog, voltmeter of size 96 x 96 sqm, square, surface mounting type, 0-300V, complete all as specified and directed.

Electronic circuit card ( P.C.B.)

Micro processor based control card for each phase

P.C.B. holder

Trigger Transformer

Rotary switch 5 Amp for R. Y. B. phases

Servo motor 3 K.G. torque of OEM make.

Resistance capacitor (R.C) net work for 3K.G. motor.

Carbon Brush

Ball Bearing 6205, Make : TATA/SKF/Kirloskar

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring with and incl 1.5 sqmm (nominal area) PVC insulated multi-stranded copper conductor FRLS in and incl PVC casing and capping ISI marked 20/30 mm size or as required at site incl with its fittings and fixture such as tees, bends, elbows and juction boxes all moduler type surface mounting etc with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing and common earth terminal complete all as specified and directed.Note :- Modular PVC Surface mounting boxes and for mounting switch ,socket with modular frame plate and cover complete all as specified and directed

One light/Fan/Exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 Amps on independent board.

One 3 pin socket outlet on same board.

M&L for wiring complete 2.5 Sq.mm single core multi standard copper conductor FRLS PVC insulated 650/1100 Volts drawn through non metalic rigid PVC casing capping including necessary accessories like bends lees and elbows etc fixed on wall/ceiling including sunken type pressed steel terminal boxes of suitable size with plastic laminated white/coloured top sheet cover 2 mm thick including 1.5 Sq.mm FRLS PVC insulated copper green wire for earth wire complete for 3/5 pin 15 Amps switch socket combination complete all as directed by Engineer-in-Charge.

S&F modular switch flush single pole one way 6 Amps.

S&F socket combination modular outlet 5 pin flush 6 Amps

S&F socket modular outlet 5 pin 15 Amp multipurpose.

S&F modular switch flush single pole one way 15/20 Amps.

S&F sheet metal single pole and neutral encloser with a two pin and earth plug and socket complete with one MCB SPN 20 amps, 240 V.

S & F Modular AC Box With 20A SP MCB, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top

Supply and fixing in repair of MCCB for DPX 415 Volts 100 Amps 4 pole with breaking capacity of 25 KA Legrand/ Schinider/ C&S

Supply & Fixing MCB DB TPN 415 Volts 200 Amps rated bus bar having 4 way single door shutter.

Supply & Fixing MCB DB SPN 240 Volts 200 Amps rates bus bar having 4 way double door shutter.

Supply & Fixing MCB DB SPN 240 Volts 200 Amps rates bus bar having 8 way double door shutters.

S&F MCB TPN 415 Volts of capacity 63 Amps complete all as directed by Engineer-in-Charge.

S&F MCB SPN 240 Volts of capacity 40 Amps complete all as directed by Engineer-in-Charge.

S&F MCB SP 240 Volts of capacity 5 to 30 Amps complete all as directed by Engineer-in-Charge.

S&F sub main wiring 4 Sqmm with two runs of 4 sqmm single core multi stranded copper conductor in PVC conduit including all fitting fixed on wall/ceiling including 4 Sqmm PVC insulated copper earth wire connected to earth, complete all as directed by Engineer-in-Charge.

S&F sub main wiring 6 Sqmm with two runs of 6 sqmm single core multi stranded copper conductor in PVC conduint including all fitting fixed on wall/ceiling including 6 Sqmm PVC insulated copper earth wire connected to earth, complete all as directed by Engineer-in-Charge.

Supply & fix recess mounted LED 15 Watt Ultra slim recess-mounting round LED downlighter designed with excellent thermally managed aluminium pressure die-cast housing with heat-dissipating fins for larger surface area finished in epoxy powder-coated white to deliver high-efficacy light output and uniformity, utilising edge-lit technology.

Supply & fix ceiling mounted LED light fitting 36 Watt Recess-mounting ultra-slim LED 2'x2' edge-lit tile in aluminium extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as directed by Engineer-in-Charge.

S&F LED flood light fitting 150 watt LED floodlight luminaire High-efficiency IP65 innovative LED floodlight with pressure die-cast aluminium housing and toughened glass in the front with unique flood optics to ensure uniform distribution and savings upto 50% as compared to conventional system complete all as specified and directed.

Supply & fix Wall mounted LED - 20 W Linear Aluminium High Lumens output LED batten made from aluminium extruded channel, powder coated with opaque diffuser for glare free light complete with accessories complete all as specified and directed.

Supply & fix Wall mounted LED batten 10 watt LED - Linear Batten made from Polymer extruded channel, with opaque diffuser for glare free light, complete with accessories complete all as specified and directed.

S&F LED lamp 5 W, 230V AC, 50Hz, single phase with all fitting and fixing accessories complete all as specified and directed. Code:SZBLB22005 of

S&F LED lamp 15 W, 230V AC, 50Hz, single phase with all fitting and fixing accessories complete all as specified and directed. Code:SZBLB22005 of

S & F stepped type electronic fan regulator flush type on the existingphenolic laminated sheet etc. as reqd

S & F electronic dimmers, 450W, 250V flush type on the exiting phenolic laminated sheet etc. as reqd

S&F replacement piano type switch single pole 230 volt flush type 5 Amps complete all as specified and directed.

S&F replacement piano type switch single pole 230 volt flush type 16 Amps.(Normal switch) complete all as specified and directed.

S&F in replacement switch socket combination with pvc gangbox 6/16 Amp as per existing ISI mark.(Normal type) complete all as specified and directed.

S&F in replecement switch socket combination with pvc gangbox 6 Amp as per existing ISI mark complete all as specified and directed.

Supply and fixing,replacement ELCB 63 Amps, 4 pole complete all as specified and directed.

S & F Modular Metal flush box 3 module complete all as specified and directed.

S & F Modular White cover plate 3 module complete all as specified and directed.

S & F Modular Metal flush box 6 module complete all as specified and directed.

S & F Modular White cover plate 6 module complete all as specified and directed.

S&F in replacement of PVC 3 Pin plug top 15 Amp complete all as specified and directed.

S&F in replacement of PVC 3 Pin plug top 5 Amp complete all as specified and directed.

S&F energy saving and enviornment friendly long life LED security light fitting 1 x 36W LED, versatile, pressure die cast aluminium IP-66 protection with high power LED as light source and arcylic cover etc incl all accessories prewired complete including mounting on bracket and necessary connection to ceiling rose etc & suitable bolts and nuts with washers, connecting with PVC insulated multi stranded copper flexible cable of size 0.5 Sqmm three core from ceiling rose to fitting complete all as specified and directed.

M&L for Servicing of1200/1400 mm ceiling Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of un serviceable part like bearing gun metal bush condensor of suitable capacity and re-assembling the same and complete all as directed by Engineer-in-Charge.

M&L for Servicing of 250/300/350mm Exhaust Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of un serviceable part like bearing gun metal bush condensor of suitable capacity and re-assembling the same and complete all as directed by Engineer-in-Charge.

Supply and fix building security light bracket, bend to 120 degree angle, made out of 32 mm bore, galvanised iron, light grade tubing (approx 1.2 mtr in length) including necessary two nos suitable size of clamps with nuts, bolts and washers, etc. and two coats of synthetic enameled paint over a coat of red oxide primer including taking down the old unserviceable one complete all as specified and directed.

M&L for earthing complete with 60cmx 60cmx3mm thick GI plate electrode buried in ground vertically not less than 2.25mtrs deep below ground level with top edge of the plate not less than 1.5mtrs below ground level with GI wire of size 4mm dia as earthing lead including necessary excavation and earth work (in any of strata) providing charcoal dust, salt mixed in continuous layer 15 CM all around the plate and balance pit will be filled with vigitable soil approved by engineer in charge, PCC (1:3:6 ) type C1 in chember ,Precast 50 mm thick in cement ( 1: 2:4) type B.1 with CI frame with cover, 20mm dia bore light grade GI watering pipe furnel etc fixing of GI Pipe 15 mm bore protection for earthing wire from earth pit to test point complete & making connection all as directed by Engineer-in-Charge.

M&L for earthing complete with copper plate of 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead electrode buried in ground vertically not less than 2.25mtrs deep below ground level with top edge of the plate not less than 1.5mtrs below ground level with GI wire of size 4mm dia as earthing lead including necessary excavation and earth work (in any of strata) providing charcoal dust, salt mixed in continuous layer 15 CM all around the plate and balance pit will be filled with vigitable soil approved by engineer in charge, PCC (1:3:6 ) type C1 in chember ,Precast cement concrete 50 mm thick in (1:2:4) type B.1 with CI frame with cover, 20mm dia bore light grade GI watering pipe furnel etc fixing of GI Pipe 15 mm bore protection for earthing wire from earth pit to test point complete & making connection all as directed by Engineer-in-Charge.

Labour/Services for servicing of 500 KVA DG Set with replacement of engine oil/lubricant coolant, Oil Filter element, Fuel filter element, fuel flexible pipe, V belt for water pump and alternator, air filter element, etc. Complete all as directed. Make : Cummin ,Engine No:2531130 Note : Engine oil and Spares to be measured and paid under respective items here in after.

Supply only the following spare parts for fixing under Serial Item No.70.00 here in before all as per existing approved make & Type

AIR CLEANER KIT ELEMENTS (K, QSK, V SERIES)

Fan BELT,V type

TEMPERATURE GUAGE

RECTIFIER SERVICE KIT - HC 4/5

TEMPERATURE SENSOR,

HOSE PLAIN

HOSE CLAMP

PARTS REPLACEMENT FOR REPAIRING OF TURBOCHARGER

Turbocharger for Gasket ,

Gasket connection

Emergency Stop button

Engine oil vavoline premium blue 7800 plus 15 W 40 55Ltr cat pt:506655

Transportation /Freight Charges

Service Charges

Labour/Services for servicing of 500 KVA DG Set with replacement of engine oil/lubricant coolant, Oil Filter element, Fuel filter element, fuel flexible pipe, V belt for water pump and alternator, air filter element, etc. Complete all as directed. Make : Cummin, Engine No:25310648 Note : Engine oil, and Spares to be measured and paid under respective items here in after .

Supply only the following spare parts for fixing under Serial Item No. 72.00 here-in-before all as per existing approved make & Type.

KIT AIR CLEANER ELEMENTS (K, QSK, V SERIES)

Fan Belt -V type

Rectifier service kit HC4/5

plain Hose

Hose Clamp

Check Valve

Valvoline premium blue 7800 plus 1/10ltr

Transportation/Freight Charges

Service charges

Labour/Services for servicing of 63 KVA DG Set with replacement of engine oil/lubricant coolant, Oil Filter element, Fuel filter element, fuel flexible pipe, V belt for water pump and alternator, air filter element, etc. Complete all as directed. Make : Cummin , E No: C72045485 Note : Engine oil and Spares to be measured and paid under respective items here in after.

Supply only the following spare parts for fixing under Serial Item No. 74.00 here-in-before all as per existing approved make & Type:

Lubricant oil filter element

Fuel water seperator

Temperature Guage ,

Inhibitor corrosion

Strainer for Fuel

Kit air cleaner element (B3.3,4B,6B)

Valvoline premium blue 7800 plus 1/10ltr

Service Charges

Transportion/Freight Charges

MODI CORPORATION

ROYAL CONSTRUCTION

SAMEER ELECTRICAL SUPPLIER

PRAGATI ELECTRICALS AND ELECTRONICS