REPAIR REPLACEMENT OF LT PANEL AND OTHER CONNECTED ITEM UNDER GE NAGROTA

Amount

Excavation in trenches in any type of soil not exc 1.5m wide and n.exc 1.5m in depth for electric poles stay foundation and under ground electric power cables and getting out complete all as specified.

Returning, filling in. including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified

Removing excavated surplus material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point.

Sand (Dry clean ) as in cushioning to underground electric cable provided all as specified in Clause 19.75 of SSR Part-I 2009.

Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat all as directed.

Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ obtaind from excavation all as directed by eng in charge.

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 320 Sqmm 3.5core, complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 240 Sqmm 3.5core, complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 185 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 150 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 120 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 95 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 70 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 50 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 35 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge

Cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and acessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 25 sqmm to 50 sqmm.

Cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and acessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 70 sqmm to 120 sqmm.

Cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and acessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 150 sqmm to 180 sqmm.

Cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and acessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 240 sqmm to 300 sqmm.

Cleaning, preparing and painting with one coat of aluminium paint to steel tubular pole 9m long complete with cross arms, MS channels, angle iron, frame work, etc incl numbering of pole with black enameled paint from stencil, complete all as directed by Engineer-in-Charge.

Aluminium strip of size 25 x 3 mm for earth continuity conductor or main earthing lead fixed to wall, burried in ground, fixed along with poles, complete all as specified.

Dismantling of ACSR or AAC conductors of any size and set in site complete all as directed.

M&L forAluminium conductor, steel reinforced of any size on LT Poles including straining,binding with insulators with Al/copper binding wire with insulators as in OH conductors, providing PVC Sleeves for jumper fixed "as in repairs" complete all as specified and directed .

Dismantling air break gang operated switches vertical/horizontal mounted including insulators and operating mechanism any type,any size.Note:-The item are not reuse in side and carrying to credit..

Switch air break gang operated (Swing out expulsion ruse insulators), tripple pole mechnical operated from ground level mounted on insulator and steel frame (15 insulators type) out door type suitable for vertical installation single break provided with locking arrangement consisting of MS channel HT post top insulator with drop out fuses operating rod 20mm dia GI medium grade pipe worked from ground levelconfirming of IS 1818 of 1972 and contineous current rating upto 200 amp and volt 11 KV complete in repairs all as specified.

Lightning arrestor non liner resistor type comply with IS 3070 Part I 1985 for alternating current system multple spark gap suitable for voltage grade 11000 volt discharge cap 65 KA complete with all fittings and all as specified.

S&F GI strip of size 25 x 4 mm for earth continuity conductor or main earthing lead fixed to wall burried in gound fixed alongwith poles complete all as specified.

S & F danger notice plate of size 25x20cm & 1.6mm thick, mild steel sheet, viteous enamelled white with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamp, bolts and nuts of approved size for HT all as specified and directed.

Cutting wild grasses,bushes,creepers,unwanted vegtation etc from four poles/ two pole Structure ,poles/stays including cleaning cripper climbed on poles asand when directed and removing the spoil and deposit where directed(size of cutting 2mx2m around the structure) entier satisfaction of Engineer-in-Charge complete all as specified and directed.Note:- The item shall be operated maximum three times in the entire period of the contract.

Supply and fixing in replacement MCCB 630 amps cap FP 415 volt with breaking cap 45 KA.Make- Havells/ABB/Schenider/L&T

Supply and fixing in replacement MCCB 400 amps cap FP 415 volt with breaking cap 36 KA .Make- Havells/ABB/Schenider/L&T

Supply and fixing in replacement MCCB 3 phase 415 volt FP 320 amps with breaking cap 36 KA.Make- Havells/ABB/Schenider/L&T

Supply and fixing in replacement MCCB 3 phase 415 volt FP 250 amps with breaking cap 36 KA.Make- Havells/ABB/Schenider/L&T

Supply and fixing in replacement MCCB 3 phase 415 volt FP 200 amps with breaking cap 36 KA.Make- Havells/ABB/Schenider/L&T

Supply and fixing in replacement MCCB 3 phase 415 volt 3P 100 amps with breaking cap 36 KA.Make- Havells/ABB/Schenider/L&T

Supply and fixing in replacement MCCB 3 phase 415 volt 3P 63 amps with breaking cap 36 KA.Make- Havells/ABB/Schenider/L&T

S & F in repair MCB TPN 32 Amp 415 volts 50 Hz AC 10 KA with necessary lugs including lugs, including taking taking down exsting MCB complete all as specified Make Legrand Cat no 40860 or equivalent I ABB / Siemens

S & F in repair MCB TPN 63 Amp 415 volts 50 Hz AC 10 KA with necessary lugs including lugs, including taking taking down exsting MCB complete all as specified Make Legrand Cat no 40863 or equivalent I ABB / Siemens

S & F in repair MCB SPN 32 Amp 415 volts 50 Hz AC 10 KA with necessary lugs including lugs, including taking taking down exsting MCB complete all as specified Make Legrand Cat no 408609 to 408617 or equivalent I ABB / Siemens

S & F in repair MCB SPN 40 to 63 Amp 415 volts 50 Hz AC 10 KA with necessary lugs including lugs, including taking taking down exsting MCB complete all as specified Make Legrand Cat no 408618 to 408620 or equivalent I ABB / Siemens

Supply and fixing in replacement indicator lamp set (RYB) complete

Feeder piller box out door type ‘factory made’ made out from 16 SWG MS sheet supported with legs of 45cm long made of iron angle 25x25x4mm thick of size 75cm x60cm x45 cm with 04 Nos aluminium bus bar of 400 Amps mounted on porcelain insulator duly drilled hole for cable connection including front and rear side opening with locking arrangement provn for incoming and outgoing cables with glands including painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge Note:- Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 30 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate. MAKE:-GUPTA AND FRIENDS,POWER CONTROL SYSTEM,JAIMAA ELECTRICALS

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 25×4 mm by means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mmdia MS round bar, excavation and earth work in any type of soil, 20mm dia bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 3 of SSR 2009 Part I connected to equipment, complete all as specified and testing on completion.

M & L for preparation of old painted steel surface by cleaning, removing rust, grease and apply one coat of synthetic enamel paint of approved shade (Spray painting outside/inside surface) of the feeder pillar box / LT Panels Outdoor / Indoor type of approximate size 900 x 600 x 500 mm complete with prior permission of Engineer in Charge. Base frame with Black enamel paint (Rate quoted shall deem to be included of Numbering of Panel/ Feeder pillar) complete all as specified.and directed by Engineer charge

M & L for servicing of feeder pillar box/ LT Cubical Panel , after dismantling the incoming and outgoing connections from MCCB/ Bus bar and replacing the old burnt/ overheated unserviceable lugs, terminals, nuts, bolts, washers supporting insulators etc and checking the serviceability of MCB / MCCB, earth continuity conductor and strip etc complete all as specified. Note: (i) Spare parts such as terminals, lugs, nut bolts, insulators etc will be measured and paid under respective item in the schedule, (ii) Labour for fixing charges of the spare parts deemed to be included in the rate quoted for the items.

Supply only aluminium lugs of any type / shape of capacity 400 Sqmm

Supply only aluminium lugs of any type / shape of capacity 300 Sqmm

Supply only aluminium lugs of any type / shape of capacity 240 Sqmm

Supply only aluminium lugs of any type / shape of capacity 150 Sqmm

Supply only aluminium lugs of any type / shape of capacity 120 Sqmm

Supply only aluminium lugs of any type / shape of capacity 95 Sqmm

Supply only aluminium lugs of any type / shape of capacity 70 Sqmm

Supply only aluminium lugs of any type / shape of capacity 50 Sqmm

Supply only aluminium lugs of any type / shape of capacity 35 Sqmm

Supply only aluminium lugs of any type / shape of capacity 25 Sqmm

Supply only aluminium lugs of any type / shape of capacity 16 Sqmm

Supply only GI Nuts, bolts, screws, washers of required sizes

S&F Extension link four set for MCCB of cap 125/160 Amp. Make: Legrand / Havells / Standard / IndoAsian

S&F Extension four link set for MCCB of cap 250 Amp. Make: Legrand / Havells / Standard / IndoAsian

S&F Extension four link set for MCCB of cap 400 / 630 Amp. Make: Legrand / Havells / Standard / IndoAsian

S&F Stainless Steel Double Compression Cable Glands, Size: up to 20mm

all as per item No 65 above but of size 25 - 40 mm

all as per item No 66 above but of size 50 - 80 mm

Material and labour for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete.

Material and labour cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings to poles & the like, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete.

M/S CHOUDHARY TRADERS

MAMTA ENTERPRISES

M/S MANISHA BUILDERS

ASHOKA ENGINEERS AND BUILDERS

Allied Technologies

Kalsi Engineers and contractors

Nitika electricals and engineers works

Bidder Name

Nitika electricals and engineers works

MAMTA ENTERPRISES

J S ENGINEERS

M/S MANISHA BUILDERS

ASHOKA ENGINEERS AND BUILDERS

Allied Technologies

Kalsi Engineers and contractors

M/S CHOUDHARY TRADERS