REPAIR TO B AND R AND E/M ITEMS OF TYPE-I, TYPE-II AND TYPE-III MD ACCN IN GFA AREA UNDER GE E/M LUCKNOW.

Amount

Taking down chowkhat with shutter without taking off shutter from frame n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutter only exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed.

Taking down shutter only n. exc 1.0 sqm each complete all as specified and directed.

Taking down chowkhat with shutter exc 1.5 sqm but n.exc 4 Sqm each and removing from site complete all as specified and directed.

S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified.

S&F Bands, straps, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications& drawing complete as directed by Engineer-In-Charge.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (styles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying and fixing in frame at site as per specification and drawings shown in section 8 of SSR part -II complete all as directed.

M&L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified.

M&L 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1), kiln seasoned and chemically pressure treated, all as specified and directed.

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

S&F 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 150mm size Aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified.

S&F 100mm size Aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified.

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300mm with hasp & staple (bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 2nd class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Hacking out old broken glass panes of any thickness, size, quality or description from wooden frames , glazed with putty or fixed with beads in repairs complete all as specified and directed.

S&F glass pane ordinary quality 3mm thick and glazing with oil putty/ wooden beads in square n. exc 0.5 m each pane complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15 cm thick (above or below ground level) compelte all as specified and directed.

M&L 75mm th PCC 1:3:6 type C-2 as in sub base, paving, plinth protection, finished even and fair complete all as specified and directed.

M&L non-skid coloured ceremic tiles 300x300x7 mm in flooring, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed.

M&L coloured glazed ceremic tiles 300x200x7 mm in dado set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed.

M&L for 30mm thick PCC 1:2:4 type B-0 using (12.5mm graded stone aggregate ) as in sunken floor mixed water proofing compound finished surface even and smooth with using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured separately.

Rendering 15mm thick cement plaster in cement mortar 1:3 as in brick/concrete surface of sunken portion using water proofing compound complete all as specified and directed. Note : Water proofing compound shall be measured & paid separately

M&L wire brushing and cleaning top surface of cement concrete including flashings and junction of parapet etc. and surface painting with a layers of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m. blinded with grit or pea size gravel @ 0.006 cu.m. per sqm and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed.

M&L Cement concrete 1:5:10 type E2 using 40mm graded stone concrete as in sunken floor, foundations, filling and mass-concrete finished surface fair and even complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

All as per item no 34 above but on ceiling surfaces.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on ceiling in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed.

All as per item No 39 above but 20 mm bore

M & L for mild steel galvanized steel tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per item No 41 above but 20 mm bore

All as per the description of above item here in before but re-fixing old steel tubing 15 mm bore

All as per item No 43 above but 20 mm bore

S&F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs stop valve, cast copper alloy, fancy type, chromium plated screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with swivel joints, suitable for 15mm dia GI pipe complete all as specified and directed.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm white, with front or back inlet with integral foot rests including connections to trap, and to flushing pipe, anti syphonage pipe, etc (excluding flushing cistern and flush pipe) complete including making good to floor all as specified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F CI 'P' or 'S' trap of 100mm size complete all as specified and directed.

S&F in repair vitreous china white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe complete all as specified and directed.

S&F 32mm dia waste pipe of polythelene, flexible, for wash hand basin or urinals complete all as specified and directed.

S&F waste coupling of PTMT (half or full threaded) for 32/40mm dia complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

All as per Item No. 55 above but fixed to walls

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

All as per Item No. 57 above but with access door

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

All as per Item No. 59 above but fixed to walls

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

All as per Item No. 61 above but with access door

M/L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F stack clamps made out from 50x5mm size flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to walls or roof for 100mm bore of pipe etc complete all as specified and directed.

Taking down cement plaster brick/stone wall, ceiling/facia (as in patch work) etc including racking out joint, hacking for key, scrubbing down with water complete including M&L for rendering plaster 10mm thick in cement mortar 1:3 on concrete surface of wall/ceiling/facia including one bonding coat with pedilite chemical and making good to match the adjacent surface all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but n. exc 1000 ltr capacity and removing to store complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC OHT tanks complete all as specified and directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube complete all as specified and directed.

M&L Plain Cement concrete Type B-0, 1:2:4 (12.50mm graded aggregate), 25 mm thick as in sub-base of floors complete all as specified and directed.

M&L 18-20mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete and 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 18-20mm thick machine cut kota stone slab as in skirting/riser over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete and 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer -in-Charge

M & L for brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6.0 m mean radius built in cement sand mortar 1:6 complete all as specified and as directed by Engineer -in-Charge

M&L for Non skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour complete all as specified and as directed by Engineer -in-Charge.

M&L for RCC M-25 Nominal Mix using 20 mm gradded stone aggregate in slabs supported on walls, beams and columns in floor,roof,landing etc complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs floor slabs, landing and similar work for fair finished surface complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, break in floors, window cills, horizental or sloping and similar exc 10cm but not exceeding 20 cm wide for fair finished surface complete all as specified and directed.

S&F mild steel TMT bars 8mm dia and over ,cut to length , bent to shape requred, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down existing water proofing membrane and cleaning roof, plastered surface etc preparing the surface to receive plaster by brushing with wire brush and fanning the surface to remove all loose dirt etc and brushing neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed.

M&L brushing with neat slurry with 3.0 kg of cement per sqm over roof surface complete all as specified & directed.

M&L for rendering plaster 10mm thick in CM 1:4 with water proofing compound @ 3 % by the weight of cement without using extra cement over roof surface complete all as specified and directed. Note : WPC shall be measured and paid seperately.

M&L for water proofing treatment to roof surface complete all as specified and directed with the followings :- (a) Apply bituminious based primer confirming to IS : 3384-1965 @ 0.50 kg/sqm (b) Apply APP modified polymeric membrane of weight not less than 3.2 to 3.6 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch aplication as per manufactureer instructions. (c) Aplying bituminious based aluminium paint @ 0.20 Kgs/Sqm in two coats over APP membrane

All as per item no 85 above but on vertical surface over a coat of hot bitumen 85/25 grade @ 1.0 kg/sqm complete all as specified & directed.

Supply only water proofing compoud complete all as specified and directed.

M&L for preparing surfaces, plastered or unplastered new surfaces of ceiling and applying two coats white wash all as specified and directed.

M & L for preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface.Incl a coat of 3mm wall care putty complete all as specified and directed.

M&L Preparation of newly plastered or unplastered surfaces of walls by brooming down and priming plastered and other surfaces with cement paint primer ( before application of cement base paint) including two coats of cement base paint complete all as specified.

M&L for complete removal existing treatment incl preparing unplastered old surfaced and distempering walls with two coats of oil bound distemper white or tinted over a coat primer on wall sufaces incl a coat of 2mm thick wall care putty complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified & directed.

All as per item No 92 above but on ceiling.

M & L for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint/shade complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint/shade complete all as specified and directed.

M&L applying one coats of Apex ( Asian Paint) / Weather coat (Berger) over old painted surface including preparation of wall surface complete all as specified and directed by EIC.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed.

M/s Reliable Electromech Systems

ANIL CONSTRUCTION