E-Tender No. 37/2025-26, EUDC-II, Noida

Amount

fo0u0fo0e0&f}rh;] ukS,Mk ds {ks= esa 33@11 dsoh midsUnzksa dk lqn`<+hdj.k ,oa izksVsD'ku lEcU/kh en ds fofHkUu dk;ZA

Safe Cartage of following centralised stock material from any of the Store Center of PVVNL Discom to work site including Loading from Store and safe unloading at site for Item No. 3 to 9

33KV CT 200/100/1Amp.

33KV CT 400/200/1Amp.

33KV outdoor PT 33 KV/110 Volts.

Battery & Battery Charger

33KV Control Panel (doubleT/f)

33KV Control Panel (SingleT/f)

Vaccum Interptor

Errection of above Centralised material and Supply and errection of the below De-Centralised material for completing the works as per RESPO.

Installation and Commissioning of 33KV CT 200/100/1Amp. at different site asper directed by EE EUTD - 2 Noida with Complete wiring and work in all respect.

Installation and Commissioning of 33KV CT400/100/1Amp. at different site asper directed by EE EUTD - 2 Noida with Complete wiring and work in all respect.

Installation and Commissioning of 33KV outdoor PT 33 KV/110 Volts. at different site asper directed by EE EUTD - 2 Noida with Complete wiring and work in all respect.

Installation and Commissioning of Battery and Battery Charger at different site asper directed by EE EUDD - 2 and 3 Noida with Complete and work in all respect.

Installation and Commissioning of 33KV Control Panel (Double T/F) at different site asper directed by EE EUTD - 2 Noida with Complete wiring and work in all respect.

Installation and Commissioning of 33KV Control Panel (Single T/F) at different site asper directed by EE EUTD - 2 Noida with Complete wiring and work in all respect.

Providing and Fixing of 4 Core2x2.5sqmm Armoured Control Cable for Control Cable with Complete work in all respect.

Water Level Earthing of above Control Panel as per RESPO.

Installation and Commissioning of Vaccum Interptor at different site asper directed by EE EUTD - 2 Noida with Complete wiring and work in all respect.

Dismentaling of old and Damaged 33KV CT 200/100/1Amp., 33KV CT 400/100/1Amp., 33KV Outdoor PT, Battery and Battery Charger, Control Panel (Single and Double T/F) from site and carriage its from Site to any store of PVVNL Discom including loading and unloading both ends.

Supply and Installation of Different types of Relay

Supply, Installation and commissioning of IDMT Numerical Micro controller Relay Type ADR 141A suitable for various 11 KV control Panel as per direction given by EE EUTD 2 Noida with complete work in all respect. (Specification given seperately due to different types of panels)

Supply, Installation and commissioningSupply of IDMT Numerical Micro controller Relay Type ADR 141A suitable for various 33 KV control Panel as per direction given by EE EUTD 2 Noida with complete work in all respect. (Specification given seperately due to different types of panels)

Supply, Installation and commissioning of master relay (24 V) at various sites as per direction given by EE EUTD 2 Noida with complete work in all respect. (Specification given seperately due to different types of panels/PTF/switchgears)

Supply, Installation and commissioning of WTI Relay at Different Sub-stationsas per direction given by EE EUTD 2 Noida with complete work in all respect. (Specification given seperately due to different types of panels/PTF/switchgears)

Supply, Installation and commissioning of OTI Relay at Different Sub-stationsas per direction given by EE EUTD 2 Noida with complete work in all respect. (Specification given seperately due to different types of panels/PTF/switchgears)

Supply, Installation and commissioning of Bucollzz Relay at Different Sub-stationsas per direction given by EE EUTD 2 Noida with complete work in all respect. (Specification given seperately due to different types of panels/PTF/switchgears)

Supply of Different type of Control Cable for wiring of VCB/Control Panels.

Supply of PVVNL Approved Control Cable 10Core and Replacement of Wiring of VCB by Control Cable 10Core at Different 30 Nos. Sub-stations under EUTD- 2 Noida

Supply of PVVNL Approved Control Cable 6Core Replacement of Wiring of VCB by Control Cable 6 Core at Different 30 Nos. Sub-stations under EUTD- 2 Noida

Supply of PVVNL Approved Control Cable 4Core Replacement of Wiring of VCB by Control Cable 4 Core at Different 30 Nos. Sub-stations under EUTD- 2 Noida

Installation of Copper Bus-Bar at Power Transformers LT side in all 47 Nos. Power T/F installed at 22 no. sub-station under EUDD 2 Noida

Supply, delivery, erection, & commissioning of Copper Bus-Bar (1.75 MTR Long/Each+03 nos Post Insulator and MS complete structure for mounting post insulator and copper bus bar) including all charges at Power Transformers LT side in all 47 Nos. Power T/F installed at 22 no. sub-station under EUDD-2 NOIDA. as following. (SDO-5=27,SDO-6=57,SDO-7=57)

SUPPLY AND INSTALLATION OF 100 Nos. L.T. FEEDER PANELS (MAIN PANEL) FOR 50 NOS EUDD2 AND 50 NOS. EUDD 3 NOIDA ON TURN-KEY BASIS.

Supply and Installation of new L.T. Feeder Pillar (Main Pannel) as per following specification with all relevant certificate:- 1) LT Feeder Pillar Box (Main Pannel) shall be of 14 SWG HR sheet, having (4) doors, two in front and 2 doors on back side of 14 SWG HR sheet. Doors should have proper locking arrangements with providing crome locks of standard make. It should have a canopy on top in order to prevent it from water ingress in rains. The doors of box should be welded with robust quality hinges and PVC Gasket with provision of 3 hinges on each door and handle on each door with PVC Gasket.The periphery of door of the LT Feeder Pillar Box (Main Pannel) shall be provided with lining of rubber/ PVC to prevent entry of rain, insects, lizards, rats etc. so as to make it vermin proof. 2) The dimension of Feeder Pillar Box (Main Pannel) 5(Height) X 3.5(Width) X 2.5(Depth) Feet (With Canopy). 3) 04 Nos. Bus Bar insulation coated made of aluminum for red, yellow, blue & neutral phases suitable for 400 Amp. 4) 01 No. ISOLATOR SWITCH of 400 Amp. of L&T / Havell’s / ABB make for disconnecting of Supply. 5) 24 Nos. KIT KAT Fuse of 415V, 200 Amp. each capacity tested as per IS shall be provided with 8 Nos. on each phase so as to cater to 8 Nos. 3 Phase connections of branch pannel. 6) Aluminum crimping lugs of size 400 / 240 Sq.mm. and proper size thimbles shall be provided for safe termination of incomer as well as individual service cable as per qty. requirement. 7) Bakelite sheet shall be provided on the base of channel meant for mounting the Kit Kats. 8) All nuts, bolts & washers used shall be electro galvanized. 9) The height of erected feeder pillar box (Main Pannel) approx. 01 feet from the earth on powder coating base of angle iron size 40x40x5mm frame with 04 nos. legs of 1.6 feet each (06 inch grount of angle on earth bottam, 6 inch grout in plinth and 6 inch gap in pannel base and plinth) 10) Grouting & Plinth of Feeder Pillar Box (Main Pannel) as per site requirement complete in all respects. 11) The panel case consisting of door and roof (canopy) shall be powder coated with chemical process (weather proof) of light green color both inside and outside. Before painting, the sun faces shall be thoroughly cleaned from dust, grease and rust. Identification no. shall be written as per direction. 12) Sundry item.

Disconncetion of all incoming & outging connection from pannel as per requirement.

Reconncetion of all incoming & outging connection from pannel after replacement as per requirement.

Dismantling of damaged L.T. Main Feeder Pannel from earth on work site.

Carriage of above dismantled Pannel from works site to JE store / central store & proper stacking with loading & unloading.

Making of plinth with Ist class brick work in the size of 1100(length)x700(width) , 150 mm below the earth and 300 mm above the earth in 1::4 (Cement,Sand) mortar with plaster outer suface of Plinth, all material and work for using in plinth will be provided by the contractor.

Installation of above new L.T. Main Feeder Pannel in place of damgaged L.T. Main Feeder Pannel with required items complete in all respect.

Providing & fixing of 3.5c x 240 sq mm aluminium armoured XLPE L.T PVC cable or as per site requirement and as per approved PVVNL technical specification for installation above Pannels as per requirement. (GTP Approved)

Providing of chemical earthing for above new L.T. Feeder Pillar (Main Pannel) and installation as per following :-

Chemical earthing with earth elctrode strip in pipe terminal type chemical earthing proper hot deep galvanization dia 50 mm length 3 mtr down conductor size - 32mm x 6mm terminal connection hole dia 8mm The cavity between the strip & pipes is filled with condutive mixture - for hermetically filling inside the cavity i.e. between secondary conductor & primary conductor, crystline compound is to be injected in the electrode assembly. It is a combination of high conductivity metal alloys, copper & aluminum power, conductive carbon / cement and bonding material etc the electrode should be sealed from both the ends. The outer pipe of the elctrode should be zinc coated the characteristics of this compound is highly cnductive, non magnetic & non corrosive in G.I. Including providing of Pgs backfill compound each elctrode should be supplied with bags of 25 k.g. x 2 bfc compound (ground resistance enhancement powder 50 kgs each CPRI tested to connect the above chemical earthing with the GI strip of size 32mmx6mm.

SUPPLY AND INSTALLATION OF 100 Nos. LT Meter Panel Box FOR 50 NOS EUDD2 AND 50 NOS. EUDD 3 NOIDA ON TURN-KEY BASIS.

Supply and Installation of new L.T. Meter Pannel Boxes (Three Phase) for 08 Nos./16 Nos. Meter as per following specification with all relevant certificate:- 1) Providing of new L.T. Meter Pannel Box of size 1350x1200 Sq.mm. + 450x900 Sq.mm. = 2.025 Sq. Mtrs. (as per drawing) made of MS sheet of 1.6 mm (+ 0.2 mm)/16 SWG thick which required into 4 columns contains & feeders as per drawings enclosed of size 450x450 Sq.mm. each for fixing the consumer's meters, 01 Nos. busbar chamber of size 900x300 Sq.mm. for fixing 04 Nos. Aluminium bus-bars for R, Y, B &N in box & 450x300 Sq.mm. feeder for incoming MCCB 200 Amp. All 04 Nos. aluminum bus bars of suitable size (40x10mm) shall be provided R, Y, B & N by insulators. The metallic covers will have to be provided on each columns of the box. The side wall of box will have suitable holes for service cables. For fixing the meter pannel box, necessary arrangement by providing clamps, nut & bolts etc. are to be made. Wiring of meter pannel box has to 10mm copper wire & lugs. Complete meter pannel box (inside & outside) should be painted with one coat of red oxide primer then 02 coats of light grey enamel paint of reputed brand make. Before painting the sun faces shall be thoroughly cleaned from dust, grease of rust. Locking arrangement with 01 No. pad lock shall be provided on each cover of the Meter Pannel Box. Complete the work in all respect. 2) Meter Pannel Box mounting by MS Angel 40x40x5mm for Meter Pannel Box mounted on wall. 3) Incoming MCCB of 200 Amp. TP L&T / Havell’s / ABB make to be installed in Meter Pannel Box. 4) Fixing of Consumer's meters in Meter Pannel Box (08 Nos./ 16 Nos. three phase) in each box or as per site requirement) and reconnection of consumer's connections with the meters and cable reconnections with the Bus-bars. Complete the work in all respect.

Disconncetion of all consumer connection from pannel as per requirement.

Reconncetion of all consumer connection from pannel after replacement as per requirement.

Dismantling of damaged L.T. Meter Pannel from earth on work site.

Carriage of above dismantled Pannel from works site to JE store/ any store of PVVNL Discom & proper stacking and safe Carriage with loading & unloading both ends.

Installation of above new L.T. Meter Pannel (Three Phase) in place of damgaged L.T. Meter Pannel with required items complete in all respect.

Providing & fixing of 3.5c x 70/150 sq mm aluminium armoured XLPE L.T PVC cable or as per site requirement and as per approved PVVNL technical specification for installation above Meter Pannels as per requirement.

Providing of chemical earthing for above new L.T. Meter Panel Box and installation as per following :-

Chemical earthing with earth elctrode strip in pipe terminal type chemical earthing proper hot deep galvanization dia 50 mm length 3 mtr down conductor size - 32mm x 6mm terminal connection hole dia 8mm The cavity between the strip & pipes is filled with condutive mixture - for hermetically filling inside the cavity i.e. between secondary conductor & primary conductor, crystline compound is to be injected in the electrode assembly. It is a combination of high conductivity metal alloys, copper & aluminum power, conductive carbon / cement and bonding material etc the electrode should be sealed from both the ends. The outer pipe of the elctrode should be zinc coated the characteristics of this compound is highly cnductive, non magnetic & non corrosive in G.I. Including providing of Pgs backfill compound each elctrode should be supplied with bags of 25 k.g. x 2 bfc compound (ground resistance enhancement powder 50 kgs each CPRI tested to connect the above chemical earthing with the GI strip of size 32mmx6mm.

Replacement of Jarjar LT lead ( 1x630 Sq.mm.) of 300 Nos. DTs under EUDD - 2 Noida

Supply eraction laying and replacement of LT lead ( 1x630 Sq.mm. in place of Jarjar LT lead ( 1x630 Sq.mm.) at various. DTs under EUDC - 2 Noida.

LT lead ( 1x630 Sq.mm.)

Errection of above Centralised material and Supply and errection of the below De-Centralised material for completing the works as per RESPO.

Providing and Fixing of suitable crimping lugs as per requirement.

Safe Carriage of above dismentaling scarp material from Site to any store of PVVNL Discom including loading and unloading both ends.

SATYA SAI BUILDERS & CONTRACTORS (BID ID -5536718)