SPL REPAIR TO BLDG TN188 AND ADDN ALTN TO BLDG TN 58 AT NAGROTA MIL STN

Amount

SCHEDULE-A PART-I (B/R WORKS AT NAGROTA) Dismantling steel sheeting, any ga+B21uge, thickness, including Nainital or similar pattern (plain or corrugated) in roof coverings including ridges, eaves etc complete all as specified and directed.

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

Demolition of cement concrete including floor tiles or stone in any description and any position etc removal from site up to 500 m complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness. complete all as specified and directed

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 25mm thick as in Sub base floor complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and directed

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for brickwork with sub class 'B' modular bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

S&F mild steel work in tubular trusses, purlins, rafters,tubler column,and running rails fixed with angle cleat or other connection plates, etc including special shaped washer etc,complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 , etc complete all as specified and directed.

S&F 0.50mm thick (total coated thickness) pre-colour, pre-profiled Galvalume sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed.

S & F pre - painted galvalume aluminium zinc coating plain sheeting 0.50 mm thick of required colour and shape having tensile strength of 550 Mpa as in ridge valley,gutters,barge board,roof covering / cladding to wall, fixed with self tapping screwes complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and as directed.(Note:- Liquid water proofing compound to be measured paid separately)

Supply only Liquid water proofing compound complete all as spesified and directed.

S & F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26mm each lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete size of grid 605 x 605mm all as specified and directed

S & F 5mm thick Printed PVC sheet used instead of plain colour PVC shectplain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed

S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters,walk ways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E 165.complete all as specified and directed

Mild steel TMT bars 10mm dia and over , cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns, hooking ends , and binding with and incl binding mild steel wire(annealed not less than 0.90mm dia or securing with clips

All as per item No 61 above but 6mm to 8mm dia -ditto-.

Demolition of reinforced cement concrete of any description and in any position not otherwise described comlplete all as specified and directed.

M&L RCC type B-1 1:2:4 using 20mm graded stone aggregate as in kitchen shelves , manhole cover, etc complete all as specified and directed.

M&L form work to suspended slab as in kitchen shelves, cubboards, drain slab etc. complete all as specified and directed

M & L for vitrified light shade floor tiles 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L in repair for glazed ceramic coloured tiles of size 300x450x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 complete all as specified and directed

M & L for stain cutting or grinding of terrazoo flooring / kota stone flooring and other stone flooring of any description and in any position, mirror polishing by machine in horizontal or vertical surface complete all as specified and as directed.

M&L preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 2-3 mm thick JK/BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion )manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge.

M&L preparation of new surface of wall and applying 2-3 mm thick JK/BIRLA white wall care putty and applying two coats of plastic emulsion paint over a coat of oil based primer complete all as specified and directed

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F 12mm thick toughened or tampered glass (tuffen glass) thermal and chemical treated with heavy strength of fine polished edge as in doors with SS long body handle, pivots, floor springs and locking arrangements of heavy duty accessories. It made from annealed glass via a thermal tempering process and toughening process. The glass compressive strength should be minimum 69 mps itching and cluster work as per sample kept in GE's office complete all as specified and directed by manufacturer's instruction and Engineer-In-Charge.

S&F Double action floor spring hydraulically regulated made up of stainless steel foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for toughen glass shutters complete all as specified and directed

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370)

S & F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane. complete all as specified and directed

S & F stainless steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed

S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.

S&F for 125mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long anodised aluminium handles, cast type complete all as specified and directed.

S&L for 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.complete all as specified and directed.

S&F for 20 to 25 mm dia stainless steel drapery curtain rod with brass /nickel chrom polish / designer lattos and brackets complete all as specified and approved by Engr-in-Charge including taking out old pelmet with curtain rodscomplete all as specified and directed.

S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm complete all as specified and directed.

Taking down or up steel 20mm bore water tubing and connections including cleaning complete all as specified and directed.

-Ditto- All as per above item no 47 above but 15mm dia bore complete all as specified and directed.

M&L 20mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

M&L 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

M& L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed

S/F Bib cock with wall flange15mm bore Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions and fixedcomplete all as specified and directed

S & F in PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and directed

S/Fangular stop cock 15mm bore fancy type Chromium Plated with wall flange complete all as specified and directed

S&F white vitreous china counter wash hand basin, of size-410X910X150mm fixed in granite counter by making suitable size hole, new brackets, 32mm dia brass chromium plated waste coupling, CP botle trap complete all as specified Make:- Jaquar-JDS-WHT-25911 or equivalent of make mentioned in Appendix 'B' Note:- Granite counter will be measured & paid separately.

S&F health faucet with 1 meter long easy flex tube in chrome finish & wall hook, complete all as specified and directed Make:- Jaquar-ALD-565 or equivalent of make mentioned in Appendix 'B'

S & F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repair CP toilet paper holder with flap and fixed in position.complete all as specified and as directed.

M & L CP towel rail of 20 mm dia 60 cm long fixed in repair. complete all as specified and as directed.

M & L CP towel ring complete fixed in repair.complete all as specified and as directed.

M & L CP soap tray fixed in wall complete all as specified and as directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete Make- Jaquar Cat No - CAN-1173 complete all as specified and as directed.

S & F PVC (SWR) pipe Type 'A' 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor complete all as specified and as directed..

S & F PVC (SWR) bend Type 'A' 110mm bore complete all as specified and as directed.

S & F PVC(SWR) reducers Type 'A' 75/110mm bore complete all as specified and as directed.

S & F PVC (SWR) pipe Type 'A' 75mm bore single in any type with rubber ring joint laid in wall/trenches / floor complete all as specified and as directed..

S&F for PVC (SWR) floor/ nahani trap 75mm with gratings including Jointing to waste pipe with solvent cement complete all as specified and as directed. .

S & F rotational moulded 500 ltrs capacity polythelene water storage tanks tripple layers white in colour ( cylindrical verticle with closed top) hoisted and fixed in position complete all as specified and as directed.

S & F 20 mm bore ball brass valves high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed complete all as specified and as directed. .

S & F 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with providing 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed..

M& L for Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil bound distemper on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.

M & L for Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick in CM 1:4 on roof suraces with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed.

M&L for water proofing treatment to sunken portition / roof etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 1.2Kg/Sqm and primer shall be allowed to dry over night. (iii) Laying APP based modified water proofing membrane of weight not less than 3kg per sqm and thickness not less than 3 mm, with 100mm overlaps, sealed and bonded to the surface by 'torchon' method (iv) Applying two coat of bituminous based aluminum painting @ 0.15 kg/Sqm each coat on water proofing treatment with preparation of surfaces complete all as specified and directed at site.

M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed.

S& power coated aluminium frame work (min thickness of power coating 50 micron) for doors, windows, ventiltors and partition, (sliding/openable/fix doors, windows, ventilator), etc with one, two or more rebates (reqd as per site), including joining cleat for fixing with dash fasteners of required dia and size, incl filling up gaps at junction, ie top, bottoms and sides etc complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of stainless steel foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for toughen glass shutters complete all as specified and directed

S&F aluminium anodised grill 6m thick fixed to aluminium window with and including 'H' type aluminium frames of size 34mm x 11mm complete all as specified and as directed.

M&L for Aluminium anodied (powder coated) window and ventilator shutters, side hung type, without sash bars, aluminium section weighing not less than 0.55 Kg/Metre including clips, rubber packing aluminium snap beading, screws, fittings (each shutters) such as peg stays 150 mm long, hinge type B-21 100 mm long (2 Nos), 150mm long D type handle (one number) and tower bolt 150mm long (one number) (Notes : (i) Glass panels to windows/ventilator shall be measured and paid for separately under respective item of this schedule as supply only. (ii) Thickness of powder (polyster) coating shall not be less than 50 Micron. (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Frame shall be measured and paid for separately under respective item of this schedule. (v) Quoted rate shall deem to included cost of alumiumum powder coated builder hard ware.

S&F 18/19mm thick prelaminated prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed wtih screws to timber frame work complete all as specified and directed..

S&F Hasp and staple of size 100mm aluminium anodised safety type, brass with mild steel hinge pin including bolt to hinges plate and fixed with screw complete all as specified and directed.

M&L for 6mm thick teak wood lipping fixed with nails etc complete all as specified and directed.

M&L french polishing on surfaces of any description, width or girth including cleaning and preparing the surface etc complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

M & L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks complete all as specified and directed

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified and directed

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)

M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface . complete all as specified and directed

M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 3mm thick on plasterd surfaces preparatory to distempering on wall surface .complete all as specified and directed

M & L for Preparation of old plastered surfces of wall and applying two coats of cement base paint over a coat of wall care putty 3mm thick .complete all as specified and directed

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge

M&L for vitrified ceramic light shade tiles 7 to 10 mm thick (square/Rectagular) ULTRA CHARGED polished area exceedign 0.36 sqm and n exc 0.42 sqm in each tiles as in floors etc set and jointed in neat cement slurry and pointed in white coloured cement to match the shade of tile over and including 15mm thick screed bed in cement and sand mortar (1:4). Note :- Quoted rate shall deem to be included cost of screed bed. Note:- Before executing of Tiles work ATT Will be done and ATT will be measured and paid seperately

M & L for vitrified ceramic light shade tiles 7 to 10 mm thick (square/Rectangular)ULTRA CHARGED polished area exceeding 0.36 sqm and n exc 0.42 sqm in each tiles as in skirting / dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 for laying glazed tiles in floors etc. complete all as specified and as directed by the Engineer-in-Charge

M & L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications. complete all as specified and directed

M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. .complete all as specified and directed

Supply and fix GI frame snap grid frame work for for flase ceiling E board size 600 x 600mm x 6MM, inserted in GI/Alluminium frame as in celing main Tee section of size 36.5 mm x 25 mm x 1.4 mm thick, cross Tee section of size 23.5 mm x 26.4 mm x 1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders complete all as specified and directed.

M & L for PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection (75mm thick ) finished even and fcomplete all as specified and directed

M & L for RCC 1:2:4 type B-0 ( using 20mm graded crushed stoneagg) as in chajjas, lintel beams shelves and similar items..complete all as specified and directed

M & L for Form work to chajjas, shelves ,troughs and similar items including edges..complete all as specified and directed

S&F 125mm size Brass handles cast type polished bright etc complete all as specified and directed.

S&F magnetic catcher of approved size and pattern fixed to shutters etc complete all as specified and directed.

M&L for mild steel of grade Fe 290-0(Gde E-250 quality-B) as in framed brackets of approved design and fixed to walls for supporting wall hanging cabinets etc complete all as apecified and directed.

S&F Venetain Blinds all as per manufacturing instructions, complete all as specified and directed.

SCHEDULE A PART-II ( E/M WORKS AT NAGROTA ) Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge

Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.

Taking down existing light fitting of any type or make, all as specified and as directed by Engr-in-Charge

M&L for Concealed Point wiring using FRLS PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 Sqmm FRLS PVC insulated unsheathed multi strand copper conductor earth wire drawn IN and including PVC conduit ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc incl testing and making good to disturbed surface to match existing surface. complete and all as specified and directed

All As per Srl item N0 110 above but for one socket out let 5 Amp controlled by one switch on same board with other switch complete all as specified & directed..

All As per Srl item N0 110 above but for one socket out let 5 Amp controlled by one switch on independent board with other switch complete all as specified & directed. .

All as per item No 110 above here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board. complete all as specified & directed.

All as per item No 110 above here in before but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket complete with one single pole MCB 20-32 amp 240V complete all as specified & directed.

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified & directed.

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified & directed.

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified & directed.

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified & directed.

S & F Modular Fan step Regulator electronic, 120 watts 2 Modulecomplete all as specified & directed.

S & F Modular blanking plates 1 module complete all as specified & directed.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.

S&F for lamp holder PVC/polycarbonate type with back plate incl 10 watt LED Bulb suitable for batten fittings complete all as specified and directed.

Supply and fixing white / warm / Cool white LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified & directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.

S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link Vertical TPN 4 way suitable for MCCBas incomer, 200 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar 200 A MCCB as incomer 16 KA complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site incl taking out of exsing UNSV DB with MCBs.(Note: MCCB 200 Amp 4 pole should be measured and paid seperately)

S&F MCCB 200A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete all as specified & directed.

S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal settingcomplete all as specified & directed.

S&F (VTPN) sheet metal enclosure double door for distribution board factory made for MCCBs DB load link TPN 4 way suitable for MCCB as incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar including 125 A MCCB as incomer 16 KA complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site incl taking out of exsing UNSV DB with MCBs.complete all as specified & directed.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.complete all as specified & directed.

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all as specified & directed.

S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete all as specified & directed.

S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete ,all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 35 Sqmm 4 core, incl medium grade pipe complete all as specified and directed by Engineer-in-Charge

Excavation in trenches in any type of soil not exc 1.5 mtr in depth and 1.5 mtr wide and getting out for laying of cables. complete all as specified & directed.

Returning and filling in including spreading, leveling , watering and well ramming in layers not exceeding 25 cm thick excavated earth complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

M&L for well burned bricks , laid flat ( old size) sub class B designation '75' for cable protection copmplete all as specifed and directed.

Sand cushioning to under ground cable laid in trenches for laying of LT UG cables 8 cm depth before laying the cable and 15 cm after laying and punned down to a depth of 10 cm as per MES SSR Part-I (2009) all as specified and directed. Note: Punned thickness shall be measured and paid to the contractor.

Supply and fixing of DWC pipe for cable protection with outer dia 50mm and inner dia 38 mm incl coupler and other accessories as required at site all as specified and directed by Engr-In-Charge.

Supply and fixing off load Change over Switch 415V, 3 Phase 4 wire, 50Hz AC supply system fabricated from stainless steel with 3mm thick for outer cell TPN aluminium busbar of cap 200 Amp 4 pole 8 ways complete all as specified and directed by Engr-in-Charge. Make : Havells cat part No : IHBC010008 or equivalent in approved make.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6.0 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections. complete all as specified & directed.

M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 sq mm as earth continuity conductor connected to commen earth and earth dolly complete including taking down existing UNSV.complete all as specified & directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified & directed. .

ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3282840)

R.K. Works (BID ID -3286569)

Malik Construction (BID ID -3286658)