Balance work of ICU and Septic Theatre in cut out at SKIMS Medical College and Hospital Bemina Srinagar.

Amount

Engagement of labours for clearance of site making holes/ space for steel griders in brick walls complete.

Providing and laying of dry stone soling in foundation on horizontal level incl. watering, ramming ,loading ,unloading and carriage of materials from source to site of work complete job.

Providing and laying in position cement concrete specified grade excluding the cost of centering and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) including all carriages, leads & lifts complete. Crushed.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) including all carriages, leads & lifts complete. crushed.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size including all carriages.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In Cement mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in cement mortar.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :of area of 3 sqm. and below.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5mm in cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriages, leads & lifts complete job.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5mm in cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriages, leads & lifts complete job. Labour Charge only.

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) including all carriages, leads and lifts complete job.

Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing of wood work for frames of doors, windows, ventilators wrought framed and fixed in position complete (Imported wood).

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Imported wood.

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Imported wood.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 100x10mm.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 150x10mm.

Providing and fixing bright finished brass handles with screws etc. complete : 125mm

Providing and fixing bright finished brass handles with screws etc. complete : 100mm

Providing & fixing aluminium Cate eye hooks ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 150x10mm

Providing & fixing M.S rod locks with inbuilt sliding bolt including screws, nuts of heavy duty complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete of size 300x450mm

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Imported wood.

Providing & fixing 12mm thick commercial ply including necessary screws, nuts, bolts complete job.

Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin polythene bags placed over existing false ceiling and held in position by crisscrossing GI wire. With resin bonded fiber glass wool with density 16 kg/cum.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of gade AC 15).

Providing and fixing of Aluminium Composite Panel ACP 3mm thick of any color, pattern, design including frame, silicon sealant self adhesive taps complete job.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.(Internal). 15 mm dia. nominal bore. Medium.

20mm dia. nominal bore Medium.

Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end). 20 mm nominal bore.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510mm bowl depth 200mm

Providing & fixing CP brass sink mixer of approved make including all fittings and fixtures.

Providing & fixing bib cock of approved quality Jaquar, Parko or equivalent.

Providing & fixing health faucet of approved make including all fittings & fixtures.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing ball valve (brass) of approved quality Complete. 15 mm nominal bore.

20 mm nominal bore.

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 15 mm nominal bore.

20 mm nominal bore.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing of B-class PVC pipe fittings of approved make for sewerage disposal including cutting of floors ,walls, trenching and making good the same complete with puttin , rubber. 150mm dia.

100mm dia.

75mm dia.

50mm dia.

Floor Trap 100mm

Floor Trap 75mm

Door Junction 100mm

C.P Greatings 100mm

Towel rail 60cm.

Stainless steel soap case

Stainless steel hanger

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing & fixing of ball cock of approved make.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm upto 2.50 sqm).

Providing & fixing hermatically dual sealed insulated glass comprosing of 6mm clear tougned glass window frame including cost of approved weather silicon sealant complete EPDM gasket etc.

M/S IRSHAD ENTERPRISES

M/S UMER SULTAN RATHER

M/S S.A. CONSTRUCTION

M/S MANZOOR AHMAD MIR

MUSHTAQ AHMAD BURZA