SPECIAL REPAIR TO PERIMETER WALL AT AFAC COIMBATORE

Amount

M&L for Cement concrete type B2 1:2:4 (40 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C 1:3:6 (20mm graded aggregates), exceeding 10 cm in width and setting in mortar cement mortar 1:4, complete all as specified and directed..

S&F for Formwork to Square, rectangular or polygonal sides of pillars, posts, struts, piers, columns and stanchions, for rough finished surfaces of concrete complete all as specified and directed. NOTE - Steel Form work shall be used.

S&F mild steel section for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

Restraining resecuring including making good staples etc, for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

Supply & fix 610 mm dia CONSEC-ZAL super razor punched barb tape(SRBT) aluminium base helix coil with and including necessary GI fixing clips for securing complete all as specified and as directed with following specification :- (i) Dia of coil (unstretcherd) - 610 mm (ii) Nos of Circles - 51 turn per coil (iii) weight of each coil with hessain pack - 8.50kg(+0.50kg) (iv) Coverage per coil- 8 RM (v) central core wire - made from 2.60 mm dia GI-HTSS wire as per Is-4454 galvanised as per IS -2629 (vi) Razor punched strip Razer punched tape shall be CONSEC-ZAL stell comprising of aluminium base with zinc alloy @ 150gm/Sqm conforming to ASTM-A792/A-792M with additional primer treated of epoxy/polyuretherane and final paint top coat of callicified green shade (BSL-139) by hot dipping process all as pecified and as directed. Note- Running length of the wall shall be measured for the payment purpose.

S & F Rolled steel sections Fe 410-W (Gde?E- 250) quality A as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screw complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc complete all as specified.

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement. all as specified and directed.

M & L prepation of new plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed directed.

M & L Preparing old plastered or unplastered surfaces of walls and applying one coat of cement based paint complete all as specified and as directed.

M&L Preparing new or previously untreated steel surfaces of any description, not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & directed.

M&L Preparing new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & directed.

M&L Preparing old or previously treated steel surfaces of any description, over 10cm in width or girth and appling One coats of synthetic enamel paint, complete all as specified & directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc, complete all as specified & directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified & directed.

UNIQUE INDIA CONSTRUCTIONS (BID ID -3084531)

SEMBA ELECTRICALS (BID ID -3086035)

KUMAR AGENCIES (BID ID -3085723)

T C KARUNANITHI (BID ID -3076438)

MSR ENTERPRISES (BID ID -3087109)

P JAYAPATHY & C0 (BID ID -3085782)

SARASWATHI CONSTRUCTION (BID ID -3084802)

RAVI ENTERPRISE (BID ID -3077267)

p.chinnasamy (BID ID -3087142)