Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹37.7 L+₹3.4 L (9.79%)Rejected-AOC B 1 2 MAHESH NAGAR AMBALA CANTT 133001 HRY | AMBALA CANTT | AMBALA | HARYANA | 133001 | L2 | Rejected-AOC Reason due to not being L1 | |
| 3 | L3₹38.4 L+₹4.1 L (11.9%)Rejected-AOC 13 P N DOGRA MARKET GOLE MARKET UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-AOC Reason due to not being L1 | |
| 4 | L4₹40.2 L+₹5.8 L (17.0%)Rejected-AOC | L4 | Rejected-AOC Reason due to not being L1 | |
| 5 | L5₹41.9 L+₹7.5 L (21.9%)Rejected-AOC NOT AVAILABLE | L5 | Rejected-AOC Reason due to not being L1 |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
25 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
GE NORTH UDHAMPUR
GE U(N) 49 2023 24 ADDITIONAL ALTERATION TO INTERNAL BR INFRA AND MISC BR ITEMS AT VARIOUS QTRS AT PB INCLUDING CERTAIN MINOR WORKS GE (NORTH) UDHAMPUR
2023_MES_616099_1
GE/U(N)-49/ 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE NORTH UDHAMPUR
₹83,000
Yes
13 Nov 2023
28 Aug 2023
27 Sept 2023
28 Aug 2023
25 Sept 2023
11 Sept 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 square metre but n.exc 4 square metre each,complete all as specified and directed by the Engineer-in-Charge.
Dismantling boarding any discription, fixed in any position with nail compete all as per specified and directed by the Engineer-in-Charge.
Dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) and rubbish off the premises complete all as specified and directed by the Engineer-in-Charge.
Demolition of Lime concrete (un reinforced) in ground floor and paving n.exc 15 cm thickness below or above GL complete all as specified and directed by the Engineer-in-Charge.
Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by the Engineer-in-Charge.
Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed by the Engineer-in-Charge.
S&F in repair 18 mm thick prelaminated medium density fibre (MDF) boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in shelves, etc, complete all as specified and directed by the Engineer-in-Charge.
S&F in repairs drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, width of flap 30mm fixed in repiar, complete all as specified for modular kitchen, complete all as specified and directed by the Engineer-in-Charge. Make : Hettick/ Gama/ Hardwyn
S&F in repairs stainless steel multipurpose basket in wooden drawers/partitions for storing rations of various types made of 3 to 4mm dia stainless steel rods, fixed in side partitions etc fixed, complete all as specified for modular kitchen. Make : Usha shriram entp pvt ltd or Kohler/ Hafele, complete all as specified and directed by the Engineer-in-Charge.
S&F in repair stainless steel of 3 to 4mm dia luddle-craddle hanging stand for cutlery all as specified and directed by Engr-in-Charge for modular kitchen. Make : Usha shriram entp pvt ltd or equivalent, complete all as specified and directed by the Engineer-in-Charge.
Fixing Only stainless steel multipurpose basket in wooden drawers/partitions for storing rations of various types,complete all as specified for modular kitchen.
S&F in repair stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen, complete all as directed by Engr-in-Charge Make : Hettick/ Goderej/ Gama
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tube complete all as specified and directed by the Engineer-in-Charge.. Make-Rajshree Doors Sintex
S&F factory Made Solid PVC Moulded Door Shutterof wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. Make: Rajshree Doors or equivalent as approved by GE
S & F 100mm long Stainless steel butt hinges, medium weight, and fixed,complete all as specified and directed by the Engineer-in-Charge.
S&F Powder coated Aluminium Towerbolt Hinges 150mm long match with windows shutters fixed with screw complete all as specified and directed by the Engineer-in-Charge.
S & F Powder coated aluminium handles 100mm long to ventilators fixed with screws, complete all as specified and directed by the Engineer-in-Charge.
S & F in repairs stainless steel curtain rods 25mm dia with end fittings and fixing brackets of required size ( two nos end brackets and two nos wall brackets fixed with wooden gutties and screws, complete all as specified and directed by the Engineer-in-Charge.
S & F vitreous china wash down water closet (pedestal pattern) snow white suitable for p or s trap complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.Make-CERA cat part No. S1050101/02, Jaquar –CNS-WHT-WH 10
S & F plastic water closet seat, white colour closet pattern with flat bottom and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified. Make-CERA cat part No. B1510121, Jaquar –CNS-WHT-WCS 1
S & F vitreous china squalting pan, orissa pattern size 580 x 440 mm white with integral foot rests, P or S trap long body with integral foot rest and fixed with cement concrete bedding complete all as per specified. (Fixed in Repair). Make-CERA, Cat part No. 2071, Jaquar –CNS-WHT-OP01
S & F PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., fixed in repairs,complete all as specified and directed.Make-CERA cat part No.2602 P (camelia) , Jaquar or hindware as approved by GE.
S & F vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, fixed in repair complete all as specified.Make-CERA cat part No. S 2040105 for WHB & for pedestal cat part No.S 2090101, Jaquar- SLS-WHT-0611F for WHB and SLS-WHT-1510 for pedestal
S & F 15 mm dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by the Engineer-in-Charge.
All as per Serial Item 25 above here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).
S & F CP Towel Ring 200mm dia fixed in repair complete all as specified and as directed by Engineer-in-Charge. Make-Jaquar, AQN-7721, Cera-F 5002105.
S & F 20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and as directed.Make -Jaquar / Cera/ Hindwear/ Ship
S & F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed. Make -Jaquar cat part no. AKP-35771P, Cera/ Ship
S & F corner Glass self ( With CP brakets) 225 x 225 mm complete all as specified and as directed.Make-Jaquar cat part No. CAN-1173, Cera- F 5005102.
S & F single lever wall mixer 3 in 1, with provn of over head shower & hand shower, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, with provision for both hand shower and over head shower, fixed in repair, complete all as specified and directed. Make : Jaquarcat part No. FUS-29281, Cera- F 2007403
S & F centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed. Make : Jaquar, Cat part No. SOL-6169B, Cera- QTF 2006461
S & F hand shower 90mm round shape (telephonic shower), chromium plated, with 1500mm long 15mm bore chrome finish flexible pipe with hook, fixed in repair complete all as specified and directed. Make: Jaquar-code HSH-1727,SHA-571, Cera-F 7030105 for hand shower & F 8070401 for flexible tube.
S & F shower rose, brass, chromium plated, with CP arm 120mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed. Make : Jaquar cat part No. OHS-1719, Cera- F 7040101 for arm & F 7020305 for shower rose.
S & F angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Jaquar cat part No- CON-053KN, Cera- QTF 2006201
S & F bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Jaquar cat part No.- CON-037KN, Cera-QTF 2006152.
S & F health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed by the Engineer-in-Charge. Make : Cera/ Hindwear
S & F jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed complete all as specified and as directed. Make : Jaquar, Cera or equivalent as approved by GE
S & F PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.Make-Jaquar, cat part No. ALD-805B, Cera-CG 107.
S & F PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.Make-Jaquar, cat part No. ALD-801B.
Stop valves, brass, fancy type with flange, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed. Make : Jaquar cat part No.CQT-23083, Cera- F 1014751 for exposed part & F 4060102 for consealed part or as approved by GE.
S & F soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, fixed in repair complete all as specified and directed. Make : Jaquar/ Cera- cat No. F 5007106 or equivalent as approved by GE
S & F CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed. Make- Hindwear/ Cera/ Ship
S & F CP brass grating 100mm dia, fixed in repair complete all as specified and as directed. Make- Hindwear/ Cera/ Ship
S & F toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed.Make- Jaquar cat part No. ACN-1153N, Cera-F 5007109.
S & F sink wall mixer, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed. Make : Jaquar Cat part No. CON-309KN, Cera- F 2007501.
S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including waste coupling and waste pipe & bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 1040mmx 510mmx 203mm bowl size 510mmx405mmx203mm, fixed in repair, complete all as specified and as directed. Make: Prayag, Cat No. 1244D of prayag or equivalent
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (sqare/ rectanglear) area of each tile exc 0.11sqm but n exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in Cement mortar (1:4) complete all as specified and directed by the Engineer-in-Charge.
M&L glazed ceramic coloured digital tiles in vertical surfaces of wall of size 450mm x 300mm x 7 mm thick as approved pattern approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 as in skirting, dado, etc, complete all as specified and directed by the Engineer-in-Charge.
M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and directed by the Engineer-in-Charge.
M&L coloured vitrifired ceremioc tiles minimum 10mm thick (square) polished , light shade, area of each tiles exc 0.42 sqm but n.exc 1.00Sq.m (min. size 800mm x 800mm ro 600 x 1200 mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick screed bed in CM (1:4) complete all as specified and directed by the Engineer-in-Charge.
All as per srl item above but as in skirting to match over and 100mm including10 mm thick rendering in cement mortar 1:3 complete all as specified and directed by the Engineer-in-Charge.
M&L rendering 10mm thick plaster in cement mortat 1:6 on fair face of brick work or concrete surfaces, finished eve and smooth w/o using extra cement, complete all as specified and directed by the Engineer-in-Charge.
M&L preparation of new plastered surfaces of wall by applying 1 to 1.2mm thick Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed by the Engineer-in-Charge.
M&L preparation of new or previously untreated steel and iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed by the Engineer-in-Charge.
Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in any type soil complete all as specified and directed by Engr-in-Charge
Excavating in trenches in hard/dense soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out hard/dense soil complete all as specified and directed by Engr-in-Charge
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting pointturning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge
M&L broken stone hardcore of gauge excedding 63mm and not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, wtered and rammed to a true surface, complete all as specified and as directed by Engr-in-charge
M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge
M&L machine pressed vibro mechnically floated interlocking cement paver block ISI marked any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-40 Grade, with topping of cement mexed with improted pigment. Laid over & including 50mm thick sand cushioning including wel ramming, complete all as specified and as directed by Engr-in-charge. Shape shall be approved by Engr-in-charge.
M&L providing, Pre cast cement concrete 1:2:4 type B-1 (20mm graded) as in kerb stones and in similar works bedded and jointed in cement morter 1:4, complete all as specified and as directed by Engr-in-charge.
M&L 300 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.
M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in sides of pipes,foundation, filling and mass concrete etc complete all as specified and directed by the Engineer-in-Charge.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as specified and directed by the Engineer-in-Charge.
M&L for rendering 15 mm thick in cement mortor 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed by the Engineer-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
Supply only integral water proofing compound complete all as specified.
M&L Complete removal of existing treatment, preparation of plastered surfaces of wall and applying two coats of cement base paint over one coat of cement primer including 1 mm thick exterior wall care putty ( to be applied in two coats) all as specified. Note: Putty surface shall be rubbed with emery paper to form even and smooth surface.
M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered of wall and applying 1mm thick wall putty.
M&L Complete removal of existing treatment,preparation of surfaces of old wall surfaces and applying two coats of oil bound distember over one coat of primer paint over and including wall care putty .
M&L for two coats of oil bound distember over a coat of primer over two coats of approved wall care putty over and including preparation of new plastered surfaces of wall complete all as specified and directed by the Engineer-in-Charge.
Dismantling ceiling boards,fibre pulb insulation etc or insulation boards/slabs/blankets,any thickness, including cover and except MS Grid all as specified by the Engineer-in-Charge.
S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in mortar.
Coloured vitrifired (double charged) super glossy (solitaire plus) tiles 10 mm to 12 mm thick (sqare) polished, light shade,area of each tile exc 0.42 sqm but n.exc 1.00 sqm (min.size 800 mm x 800 mm/600mm x 1200mm) in floor etc, set with spacer and jointed in neat cement slurry and pointed in white or coloured tile grout including 10 mm thick screed bed in CM(1:3)complete all as specified and directed by the Engineer-in-Charge.
S&F 5 mm thick honey combed PVC wall panelling HL series (as per sample kept in GE office ) of wall affairs or its equavilant apporaval colour fixed to wall including angle jointed/U jointed required at corners/top of panelling etc complete all as specified and directed by the Engineer-in-Charge.
S&F continuous piano hinges mild steel, bright finish or electro galvanised with width of flap 30 mm when open, complete all as specified and directed by the Engineer-in-Charge.
M & L for Red/Black granite(of any type)stone slab 16mm thick machine cut as in pillers/staircase/window cills/counter top slab bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edg complete Including 10mm thick backing coat CM 1:4 and including demolition and dismantling complete all as specified and directed by the Engineer-in-Charge.
anil construction co.
VARDHMAN INTERNATIONAL
RAJ MOHD
DURGA CONSTRUCTION CO
M/S IMTESH BHAT
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .