Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.4 LAdmitted-Finance | -2.02% | ₹1.4 L | L1 | Admitted-Finance |
| 2 | L2₹1.4 L+₹5,009.56 (3.63%)Admitted-Finance | +1.54% | ₹1.4 L+₹5,009.56 (3.63%) | L2 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹14,072
Closing Date
25 Mar 2026, 3:00 pmClosed
Executive Engineer
Nagar Nigam Firozabad
Repair and painting of toilets located at Nagla Gulriya, Sailai, Kakrau and Nagla Bhau within the limits of the Municipal Corporation and repair work of pots etc. in urinals near Kakrau Chauraha, Lallu Road, Electricity House, Raina Nala Road etc
2026_DOLBU_1119957_4
15/PWD/2025-26
Open Tender
Civil Works
Percentage
Firozabad
Please refer Tender documents.
2 documents required · 2 mandatory
₹295
Municipal Corporation
₹14,072
10 Aug 2026
19 Mar 2026
25 Mar 2026
19 Mar 2026
25 Mar 2026
19 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | |||||
| 2Providing and laying Ceramic glazed tiles on walls of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.DSR 2023-24 S.No. 11.37 A | |||||
| 3Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | |||||
| 4Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneer on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 2023 S.No. 9.20 | |||||
| 5Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (DSR 2023 S.No. 10.28). | |||||
| 6Supply and fixing of Tower Bolt 100 mm ............ Including all complete. | |||||
| 7S/F of Door handle 150 mm …………… ……………. Including all complete. | |||||
| 8Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacoratedwall surface togive evenshade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75 Ltr/ 10 sqm coat curing and cos to fall material, labour, T&P etc. required for proper completion of work.for two coat. (PWD SOR 2025-26 SNo. 35 New | |||||
| 9Applying priming coat over new steel and Painting Ist coat over priming coat on steel and other material………………all complete. | |||||
| 10Providing and laying Vitrified tiles in floor with lean concrete of 600x600mm sizes (thickness 10mm), with a water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. including preparation of 75mm thick base with concrete 1:4:8 Cement, Coarse sand and 40 mm B/B complete as per Engineer -In -Charge. (DSR 2023 S.No. 11.41.2) | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.27 MB
BOQ_2102732.xls
BOQ • 0.36 MB
TD.pdf
Tender Documents • 1.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .