Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹39.9 L+₹57,697.56 (1.47%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹40.0 L+₹70,689.09 (1.80%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹40.5 L+₹1.2 L (3.00%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹39.5 L
EMD Value
₹78,920
Closing Date
29 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Hakimpet
Secunderabad
PROVN OF AEROLUBE STORE NEAR BLDG NO. T-2 AT AFS BEGUMPET AND CERTAIN MAJOR REVENUE AND MINOR WORKS AT AFS BEGUMPET UNDER GE (AF) HAKIMPET
2022_MES_560717_1
8453/E8
Open Tender
Civil Works
Item Rate
180 days
BEGUMPET
As per NIT
6 documents required · 6 mandatory
₹500
GE (AF) HAKIMPET
₹78,920
Yes
21 Dec 2022
1 Nov 2022
1 Dec 2022
1 Nov 2022
29 Nov 2022
15 Nov 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep & getting out in any type soil complete all as specified.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out any type of soil.
M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation filling and mass concrete.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM1:6
M&L for Formwork to sides of rough finished surfaces of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified.
M&L for use and waste Formwork to sides of pillars, post, stuts, coloumn and stanchirns fair finished surfaces of concrete square, rectangular or polygonal complete all as specified.
M&L for use and wase Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) for fair finished surface.
M&L for use and waste Formwork to rough finished surfaces of sides and soffits of floor or roof beam, beam haunching, lintels, cantilevers, shelves including supports, overhangs etc complete all as specified
M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified.
M&L TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified.
All as per item here-in-before but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L Reinforced Cement concrete Nominal Mix, Type B1 1:2:4 (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete
M & L for RCC Nominal Mix, Type B1 1:2:4 (using 20mm graded stone aggregate) for Beams catileveres bressummers, lintels over 1.5m span and similar work complete all as specified and directed
M & L for Damp proof course 40mm thick in cement concrete 1:2:4 type (B-0) to horizontal or vertical surfaces including necessary formwork including mixing of WPC as per manufacturer instructions. Note: WPC shall be measured seperately
Supply only integral water proofing compound
M&L for RCC Nominal Mix, Type B1 1:2:4 (using 20 mm grade stone aggregate) for columns, pillars, piers, posts and struts etc all as specified
M&L for RCC Nominal Mix, Type B1 1:2:4 (using 12.5 mm grade stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 105X60mm
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in filling in pressed steel door frames complete or hold fast block all as specified and directed.
S&F factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S&F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section.
S & F 150mm long extruded aluminium alloy handles fabricated type anodised.
S & F floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of 150mm long
M & L for preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.
S & F for Sheet glass 4.00 mm thick, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane
M&L for excavating over areas, n exc 1.5 m deep and getting out soft/loose soil
Removing excavated material exc. 250m and n.exc 500m, depositing where directed at a level n exc. 1.5 m above the starting point
M&L for spreading and levelling well ramming including watering as required of soils in layers n exc. 25 cm thick
M & L for broken stone or boulders hardcore of gauge exc 63 mm but n.exc. 150 mm, deposited, spread and levelled in layers n.exc. 75mm thick, watered and rolled/rammed to a true surface
M&L for 75mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base of floor.
M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as base concrete.
M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6
M&L for Non skid colored ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/Skirting.
M&L for glazed ceramic Coloured tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match.
M&L for rendering 15 mm thick cement plaster on fair surfaces of brick work or concrete surfaces in CM 1:4 finished to even and smooth surfaces in without using extra cement etc complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster on fair brick work or concrete surfaces in CM 1:6 finished to even and smooth sitfaces in without using extra cement incl.
M&L for rendering 5 mm thick ceiling cement plaster on fair brick work or concrete surfaces in CM 1:4 finished to even and smooth sitfaces in without using extra cement incl.
M&L for preperaing new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer all as specified.
M&L for for preparation of new plastered/ undecorated surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in , plinth protection , including finishing the surface even and smooth without using extra cement.
M & L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel and drains, including finishing the surface even and smooth without using extra cement.
Returning filling in excavated material any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all directed.
Removing surplus excavatet any type of soil to a distance n exc 50 m and deposting where directed at a level n exc 1.5 m above the starting point complete all as directed.
M & L for rendering 10mm thick with CM (1:3) on concrete surfaces (on top of roof slab) mixed with water proofing compound as per manufacturer's instructions surfaces finished even and smooth without using extra cement (WPC shall be measured and paid separately)
Supply only Liquid water proofing compound
M & L for cleaning the roof surface and applying oil bond bitumen primer @ 0.2 kg/sqm providing and laying 3mm thick APP modified water proofing membrane weight not less than 4kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800 N/sqcm tearing strength 180N with minimum of 10cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed by engineer in charge. Note: the quoted rate shall included for cutting grooves in roof parapets, upward facias, etc and inserting of membrane and making good with CM 1:3 wherever required all as specified and directed.
M&L for Precast Cement Concrete block masonry with solid blocks type C1, 1:3:6(using 20mm graded aggregate) exc 10 cm in width and setting in Cement mortor 1:4 complete all as specified.
M&L for plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping ,Benching including necessary form work.
Excavting in post holes(or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in soft/loose soil.
M&L for mild steel works in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming and similar work conforming to Fe-290 Gde E-165
M&L for mild steel works as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde E- 250) quality A
S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of neck 5 to 10mm and length exc 5cm but n.exc 10cm.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.
Supply only Chain link MS galvanisd fencing, any size or type
M&L for loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells. Note: Vehicle details shall be entered. Gate pass details shall be indicated.
M&L for Cement concrete (1:2:4) type B-2 in foundations, filling and mass concrete
M&F for mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes Fe 410-W (Gde-E-250 quality-A) conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
M&L Plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for Preparation of New previously untreated steel surfaces of any description and priming with Red oxide, zinc chrome and applying two coats of synthetic enamel paint over 10cm in width or girth, not otherwise described
M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) of 50 mm thick as in floor finishes, complete laid in bays all as specified and as directed.
M&L for Forming 12mm thick 100 deep Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’
S&F anodised aluminium snap grid of size 605 mm x 605 mm frame work for false ceiling including Non asbestos fibre cement building boards 6 mm thickness fixed or laid/inserted to timber/GI/Aluminium frame work with screw fixed in ceiling flat or sloping including M&L hangers 6 mm dia GI (up to 1.2 m length) adjusting level fixed to roof slabs by means of ceiling cleats made up of GI flat 40x3mm size 60 mm long fastener and preparing of ceiling boards and applying two coats of distemper over a coat of suitable primer complete all as specified and as directed by Engineer-in-charge Note- Taking down and refixing of Light and Fan in position and extention of fan rod if any is the responsible of Contractor
S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confiRming to Fe 290 Gde E-165
M&L Old size Brickwork with fly ash brick, straight or curved on plan exc 6m menan raidus, built in CM 1:6
M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) of 100mm thick as in floors, and Pavings, etc., complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) of 75mm thick as in Sub-floors, Sub-Bases, Floors, plinth protection and Pavings, etc., complete all as specified and as directed.
Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removed debris outside MD land.
M&L Rendering 5 mm thick cement plaster on fair surfaces of concrete surfaces in CM 1:2 finished to even and smooth surfaces in without using extra cement for pegeon hole etc complete all as specified and directed.
Supply, installation, connecting, testing and commissioning of wall mounted split units indoor & outdoor complete with cordless remote control unit, with 5 star rating, with inverter technology of capacity 1.5 TR, inclusive of suction and discharge lines of suitable size and length of copper tube including necesary brazing and providing nitrile tubing over gas circulating copper tubes and neatly tying the ends with PVC insulating tape and mounting on suitable bracket inclusive of suitable drain pipe for disposal of waste water upto ground level, including cutting holes in to stone/brick walls built in cement mortar or cement lime mortar and wall of cement concrete not exc. 150 sq.cm area of holes for running copper tubes from indoor to outdoor split unit and testing, neatly finishing the disturbed surfaces of walls to match with the surroundings complete all as specified and directed. Make: Carrier/Bluestar/Daikin/Hitachi
Supply & Fix SPN Enclosure with 2 pin and earth plug and socket complete with one single pole MCB 20Amp rating
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA Make : V-Guard/Volino/or as approved by GE
S&F Sub main wiring with two single core wires of 6 Sq mm, single core, PVC insulated and unsheathed stranded copper conductor cable FRLS drawn through and including PVC conduit and accessories, ISI marked complete including earth continuity wire with one run of 6 Sq mm PVC insulated, unsheathed copper cable, single core complete all as specified and directed. Note: Three runs of 6 Sq mm + PVC conduit with its complete accessories measured as one unit length) Make: Finolex / Havells/pollycab
M&L for cutting round holes 300 mm dia for fixing exhaust fan into or through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required and plastering in CM 1:4 to external/internal surfaces and finished to match with the exsiting surfaces all as directed by Engr - In- Charge.
M&L flame proof Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including stove enamelled steel conduit of suitable size (Surface) and its accessories of suitable size and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor for light point controlled by one switch.
M&L Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia,concealed wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof with and including 2 mm thick MS sheet fabricated terminal boxes flush mounted for mounting the switches, sockets, fan regulator etc as required with 3mm thick laminated hylum sheet top cover all as specified and directed for :-
S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V
S&F CMRI Certified LED Flameproof 2X16/20W LED Tube Light fixture group IP 65 Protection with complete fitting, LED tubes 16/20W-Qty 02 Nos and accessories all as specified and directed. Make : Crompton EXTN2LT8-16/20 or Sudhir or Bajaj or equivalent
S & F LED light fitting 4feet,1x18w,a trendy wall mounted battern,with extrunded aluminium housing,with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
S & F switch modular 5 amps one way flush type.
S & F ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed.
S & F of white cover plate with frame 6 module
S&F of Modular Metal flush box 6 Module
S&F LED street light fitting 30W LED made up of pressure die cast aluminium housing with acrylic cover as diffuser with minimum IP 66 protection complete including taking down old unserviceable fitting all as specified and as directed. Make: Syska, Bajaj, Wipro, Havells, CG, Phillips
S&F MCB DB SPN 6 way complete in SS enclosure double door type with 200 amps rated busbar.
S & F of MCB SP 230 volts 5- 32 Amps with 10KA breaking capacity
S & F of MCBDP 230 volts 40 Amps with 10KA breaking capacity
Supply and fix Exhaust Fan, Flame Proof 380 mm sweep single phase 215 Volts 50 Hz Matal body with Loures all as specified and as directed By Engineer -in - Charge
M/L for providing earthing complete with copper plate electrode 600 mm x 600 mm x3.15mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level ,Alternate layers of charcoal) & common salt Crystal and connected to G I earth strip 32x6mm by means of bolts, nuts, check nuts & washers of copper and connecting to earth dolly all as shown in electrical plate No. 3of SSR Part I of 2009 & testing complete including 40mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , including 20 mm bore water pipe medium grade GI Tubing including GI Funnel , wire mesh etc. ( NOTE :- Earth continuity conductor and GI protection pipe beyond 7.5m shall be measured and paid under the respective items ).all as directed by Engineer- in charge.
M & L for XLPE insulated, 2 Core, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, Cross-Sectional Area 10 sq.mm all as specified and as directed
Supply and spread fine river sand in trenches or in cushioning to cable in substation yard surrounding transformer all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
Supply & laying well burnt bricks, sub class 'B' brick of size 230x115x75mm laid across trenches for cable protection all as specified and as directed.
M&L for cutting grooves in brick work for concealing wiring/pipe and making good with CM 1:4 and finishing the surfaces to match with the existing finishes all as directed.
BEEGEE DESIGN SYSTEMS
K LAKSHMAN SINGH AND CO
M/S P.SWAROOP KUMAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .