Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.9 L
EMD Value
₹1 L
Closing Date
26 Oct 2026, 12:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
eecdbulandshahar
eecdbulandshahar
Construction of 2 rooms for senior junior assistants and 1 room for record keeping at the Office of the Executive Engineer Construction Division PWD Khurja District Bulandshahr
2026_CEMRT_1197651_1
1804/6A/E-tender/2026 Dt. 13.10.2026
Open Tender
Civil Works - Buildings
Lump-sum
90 days
khujra
Please refer Tender documents.
2 documents required · 2 mandatory
₹950
₹1 L
Yes
16 Oct 2026
16 Oct 2026
26 Oct 2026
16 Oct 2026
26 Oct 2026
16 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 35.5 | cum | 134 | ₹4,757 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 3.9 | cum | 5,147 | ₹20,073.3 |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 25 | cum | 6,835 | ₹1,70,875 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 24.9 | cum | 5,389 | ₹1,34,186.1 |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 25 | cum | 6,880 | ₹1,72,000 |
| 6 | Excavating, supplying and filling of local earth (including royalty) bym mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 36.9 | cum | 529 | ₹19,520.1 |
| 7 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with adjustable lugs with split end tail to each jamb. Profile -B Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 109 | Mtr. | 440 | ₹47,960 |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 18 | Sqm. | 2,624 | ₹47,232 |
| 9 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 33 | No. | 63 | ₹2,079 |
| 10 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding Including cost of, all material, Bitumen, labour, T&P, royality, all taxes and labour cess complete. But excluding GST. | 105 | KG. | 165 | ₹17,325 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
T.pdf
Tender Documents • 1.39 MB
BOQ_2262799.xls
BOQ • 1.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .