PROVN OF WATER STORAGE TANK AND RAIN WATER HARVESTING PIT AND SHED WITH HARDSTANDING NEAR BLDG NO.T-1 AND SPL REP IN BLDG NO. P-25, P-27/1 AND P-37/02 (HANGER) OF 665 ARMY AVN SQN (R AND O) UNDER GE NASIK ROAD CAMP.

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil etc

Excavation over areas n.exc 1.50 m deep and getting out in soft/loose soil.

All as per item No 02 .00 above but additional depth 1.5m and getting out Hard/dence soil

All as per item No 02.00 above but additional depth 1.5m and getting out Soft/dis integrated

Excavating in trenches n exc 1.50m wide and n.exc 1.50m in depth and getting out in soft/loose soil.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25mm thick with excavated soil all as specified.

Removal of surplus excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete.

Removing excavated material exceeding 250m but not exceeding 500m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Taking down carefully (copper/aluminium) point wiring in ceiling and wall refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete and all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

Supplying and Fixing of ‘’ Woodlot ’’ FR Grades 2430x131x16mm made of MDF backed with acoustical Fleece providing sound absorption of 0.88 NRC as per ISO 354.To be installed with 15mm Aluminium profile conforms to Aluminium Alloy 6063-T 6.Temper As per BS:1474-1987 and G.I Lock in clips on the back of tongue and Groove system. The density per panel is 750-800 kg/m3.The panels come with tongue & groove for seamless patterns,4-28mm Groove and visible panel. These slats are made from acoustical fibreboard with linear perforations for excellent uniformity. The perpendicular holes are available on the back of panel which are covered by black acoustical fleece. Achieves sound reduction of 0.88 NRC. To be installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 thermal conductivity test , W/mk , as per ASTM C 518 test result ( SC-6490) -0.03312 for excellent results .Make : OEMHIMLAYAN ACOUSTIC /BASWA/KPAI/BAUX

Supplying and Fixing ‘APHONY GLOSS’ 15 mm tiles made of Wood Fibre 1mm width cement composites (Non Magnesite bonded) covered with Acoustically Transparent Absorptive microfibres on the front side with an option of colours as per the choice of the Architect/ person in charge of size 600 X 600mm Highly recommend for ceilings, has excellent noise absorption of 0.85 NRC as per ISO 354/ASTM 423C, meets stringent Fire Ratings ASTM D- 876, and BS:476 weather resistance as per IS 3308, Thermal Conditivity result 45 w/m2/K as per IS:3346-1980 with relative humidity of 90% RH at 60o Celcius(140o Farenhite) for 15 days= No deterioration To be installed with Aluminium H Profile on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of HIMALYAN ACOUSTICS. 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 thermal conductivity test , W/mk , as per ASTM C 518 test result ( SC-6490) -0.03312 for excellent results. Make : OEMHIMLAYAN ACOUSTIC /BASWA/KPAI/BAUX

Dismantling Pre-painted galvalume aluminum, CGI corrugated and plain sheets in wall cladding or roof coverings including ridges and make good of aluminium earthing strips after fixing of sheets (at any height / any location ) complete all as specified and directed.

Refixing old any thickness pre-painted galvalume aluminum, CGI corrugated sheet with two corrugations side lap, fixed with coach screws and washers, in roofs, after repair of roof (at any height / any location ) etc.complete all as directed.

M&L for Preparing new untreated steel or iron surfaces over 10cm width or girth and and two coats of synthetic enamel paint over and including a coat of red oxide. Note:work is to be executed at any height and situation.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws (at any height / any location ) complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall,ridges fixed with self tapping screws as specified

Dismantling fibre glass reinforced translucent corrugated sheeting in wall cladding or roof coverings including ridges and make good of aluminium earthing strips after fixing of sheets (at any height / any location ) complete all as specified and directed.

S&F for 2 mm fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall (at any height / any location ) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, vally guters and wind tie for ridge including bolts, bending, welding, reveting to supporting if required: hooks (stay), heavy, similar small articles conforming to Fe-290 Gde-E-165

M&L for preparing new steel surfaces of any description over 10 cm in width or girth and applying two coats sythetic enamel paint of with one coat of 'H' primer in four or more shades as directed by Engr-in-charge inclnecessary scaffolding and other safety arrangement to work at any height at site if required.

Demolition of Brick work or stone/boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for works with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:6.

M&L Brick work with old size fly ash bricks, straight or curved on plan exc. 6 metre mean radius, built in cement mortar 1:6, in any position, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level)

M&L for broken stone hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled / rammed to a true surfaces complete.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper mbedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping complete all as specified and directed

Excavation in post holes (or similar holes) each in n exc 0.5 cum getting out and removing surplus soil to a distance in n exc 50 m and making good surface in soft/loose soil complete all as specified and as directed.

M&L for PCC(1:4:8) type D-2 using 40mm graded stone aggregate in foundation mass concrete and filling complete.

M&L for PCC 1:2:4 type B2, including necessary formwork using 40mm graded crushed stone aggregate, as in surface channels and drains etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge

M&L for rendering 15mm thick(minimum) in CM 1:4 with intergral waterproofing compound (200 gm per bag of cement used) on roof surfaces,parapets,facias etc. Note: waterproofing compound shall be measured and paid separately.

M&L for rendering 15mm thick in CM 1:6 on brick surface finished even and smooth without using extra cement as in drain and culvert complete and all as specified.

Supplying only integral water proofing compound ISI marked complete all as specified and as directed.

M&L for Granite (of any type) work 20mm thick machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match.

M&L for coloured glazed ceramic tiles 350x250x7mm/450x350x7mm thick as in dado/wall tiling over and including 10 mm thick backing coat in CM 1:4 in any position /shape/pattern Note: size, shade and pattern of tile shall be as approved by GE based on manufacturing company catalogue. work is to be executed at any height and situation.

M&L for vitrified ceramic digital tiles (Superior quality) 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed in CM 1:6 as in floors . Note: Size, shade of tile shall be as approved by GE based on manufacturing company catalogue. Work to be executed at any height and situation.

M&L for rendering 10mm thick CM 1:6 of brick work or on internal concrete surfaces complete all as specified and as directed by Eng-in-charge.

Use and waste form work to faces of walls, retaining walls etc

M&L for RCC M-30 Design mix in walls, retaining wall,ballast walls and the like any thickness above top of fottings incl attached pillasters and buttresses etc complete.

M&L for RCC M-30 Design mix in slab supported slab and the like

S&F for steel work as in tabular trusses/supproting pipes etc complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240

S&F for roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-410-W (Gde E-250) Quality -A all as specified and directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc.

M&L for TMT Bars 10 mm dia and over cut to length, bent to shape required including cranking, bending looking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200 mm thick, rough finished surface of concrete complete.

Providing precast cement concrete cover of manhole and similar nature of work as in CM (1:2:4) Type B1 using 20mm graded stone aggregate etc complete all as specified and directed by Engr-in-Charge.

M&L for loose filling with gravel 5 to 10 mm size complete

M&L for spreading of coarse sand 1.5 to 2.0mm in size as in filling

M&L for spreading of Charcol 15mm to 25mm in size as in filling

M&L for spreading of Pebbles in size as in filling

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails btraces etc

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F welded steel wire fabric exceeding 4 kgs/per Sqm

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paints over a coat of primer.

M&L for drilling of 12" (300mm) bore in any strata in any type of soil rock by means of rotary drilling method up to 50m deep below GL including disposal off surplus soil to a 50M complete

Supply lowering and fixing of plain MS black pipe 6" (150mm) nominal bore medium grade wall thickness 4.80mm made of MS ERW sockets and socketed IS 1239 marked pipe in statndard length complete with necessary fitting and joining complete

All as per Sl Item No. 58.00 above but slotted pipe having (1.59mm to 3mm) x 75mm slot compltete with necessary fitting and joiunting

S&F MS well cap 6" (150mm) bore mild steel ERW pipe having internal threads and with welded iron handle and fixed in position complete

Washing the bore with compressed air (pressure not less than 250 PSI & 400 cuft per minute capacity) to improve porosity and taking out all the sedimentation silt, deposited at a distance not exc 50m

S&F bail plug suitable for 150mm bore pipe wall thickness 4.80mm made out of MS black pipe complete

M&L for hume pipe RCC class NP3, laid 300mm dia laid in trenches complete.

M&L for concrete bed 1:3:6 Type C-2 to drain pipes including under and haunching against the sides of pipes after they are laid and tested etc.

Dismantling PVC (SWR) pipe any size and in any position complete all as directed by Engr-in-Charge.

S&F for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F for 110mm PVC (SWR) bends any radius

S&F for 110mm PVC (SWR) branch piece, single (single Y) equal or unequal

Taking down anti bird netting of any description at any position and any height complete all as specified and directed by Engr-in-Charge.

M&L for bird proofing net made of Anty Bird net in UV black colour made of material Polyolfin all weather proof Co-polymer of machine knotting using CNC machine with DSLS technology for anti silp knotting, heat setting should be steam saet for greater dimensional stability and knot firmness and diameter of the twine is 1mm and size of mesh 25x25mm (+2) and should achive twine breaking strength of 16 Kgf (160N) minimum and MBS (Knot breaking strength) 12 Kgf (120N) and KBS (Knot breaking strength) 22 Kgf (220N) minimum fixed complete all as per manufacturers instructions complete on trusses. Bird proofing arrangement shall fixed/tied to truss members (at any height / any location ) with nylon wire as per manufactures instructions & as per direction of Engr-in-Charge. Make-Leo Technova India or equaivalent approved make.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store and making good to disturb surfaces of wall/floors etc as specified & directed.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLSH type drawn through and including stove enamelled steel conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLSH type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point and one fan point controlled by one, one way swtich.

All as per Item No. 72.00 above but One 5 Amp 5 pin socket outlet point on independent board with other switches including earth wire as specified.

All as per Item No. 72.00 above but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per Item No. 72.00 above but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes.

S&F modular switch 6 Amp, 230 volts AC one way, complete all as specified and as directed.

S&F modular socket 6/16 Amps 2/3 pin multipurpose 2 module, complete all as specified .

Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing in replacement of LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with battery backup and tri-colour CCT with remote control, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

S&F modular socket 6 Amps 2/3 pin combined multipurpose 2 module, complete all as specified and as directed.

Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and fixing of ceiling fans BLDC type complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. five star rated with brushless direct current motor.

Supply and fixing in replacement of distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

Supply and fixing in replacement of of MCB SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA

Supply and fixing in replacement ofof MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, FRLS type, multistranded flexible copper conductor 1100Volts grade cables 2 x 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade PVC insulated unsheathed multi stranded, FRLS type flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 62,270.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

BHUSHAN BHIMRAO PATIL (BID ID -3501208)

M/S SAMEER SUBHASH PATANI (BID ID -3501909)

KESHAV NIVRUTTI KADBHANE (BID ID -3496733)

MS VAIBHAV R MAHAJAN CONSTRUCTIONS (BID ID -3499538)