M.W.Providing Transit Accommodation for Hon ble L.G.s Office Phase I, Southern side of Old Distillery, Puducherry. S.W. Civil works including water supply, drainage facilities, providing lift, AC and internal electrification.

Amount

Reinforced cement concrete work in beams, suspended floors roofs having slope up to 15degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level excluding the cost of centering ,shuttering, finishing and reinforcement , with 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size)

Centring and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings , balconies and access platform.

Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete above plinth level - Thermo - Mechanically Treated bars Fe - 500D or more

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 fine aggregate)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 fine aggregate)

Extra for providing and placing in position 2 nos 6mm dia M.S.bars at every third course of half brick masonry

Providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as - flamed finish granite stone slab Jet black , Cherry red, Elite brown, Cat eye or equivalent

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 fine aggregate) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Vengai wood

Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete - Kiln seasoned and chemically treated Vengai wood

Providing 40 X 5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 300 x100 x 150 mm 1:3:6 mix (1 cement : 3 fine aggregate : 6 graded stone aggregate 20mm nominal size)

Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces etc .Complete with - Vengai wood

Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 125 X 85 X 5.5 mm (heavy type)

Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 100 X 85 X 5.5 mm (heavy type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : - 250x10mm

Providing and fixing bright finished brass door latch with necessary screws etc complete - 300 x 16 x 5 mm

Providing and fixing bright finished brass handles with screws etc.complete: 125mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete

Providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding,grinding. Buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complte. i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer -in-charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.,)

Kota stone slab flooring over 20mm(average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 fine aggreegate). 25mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1cement :3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs,including rubbing and polishing complete

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specifed by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (one cement : 4 fine aggregate) jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching the pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge. Clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Double charge vitrified tiles polished finish of size - size of tile 1000x1000mm

Providing and laying vitrified tiles of size 500 x500 mm (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved make , in all colours & shade, in skirting , riser of steps , over 12 mm thick bed of cement mortar 1:3 (1 cement :3 fine aggregate), jointing with grey cement slurry @3.3 kg per sqm including grouting the joint with white cement & matching pigments etc.complete - size of tile 600x600mm

12 mm cement plaster of mix 1:5 (1 cement : 5 fine aggregate)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:5 (1 cement : 5 fine aggregate)

Finishing walls with acrylic smooth exterior paint of required shade - New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm

Painting wood work with deluxe multi surface paint of required shade. Two or more coat applied @0.90 ltr / 10sqm over an under coat of primer applied @ 0.75 ltr / 10 sqm of approved brand and manufacure

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams / litre , of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour - Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content - with water thinnable cement primer on wall surface having VOC content less than 50 grams / litre

Providing and fixing bright finished brass hard drawn hooks and eyes - 100mm

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid,10 litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets , cutting and making good the walls and floors wherever required - W.C.pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x 260x350 mm and 340x410x265mm sizes respectively with automatic flusing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I.clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required - Range two urinal basins with 5 litre white P.V.C. automatic flusing cistern

Providing and fixing stainless steel AISI - 304 (18/8) Kitchen sink as per Is 13983 with CI brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board - 510x1040 mm bowl depth 250mm.

Providing and fixing stainless steel AISI 304 (18/8) Kitchen sink as per Is 13983 with CI brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required - Kitchen sink without drain board - 610x510 mm bowl depth 200mm.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Enginner-in-charge.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer-in-charge a) 15 mm nominal dia

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings -angle back wash basin of size 600x480mm

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete - Flexible pipe - 40mm dia.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing rectangular shape 453x357mm.

Providing and fixing toilet paper holder CP brass.

Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality and colour - waste coupling 38 mm dia of 83 mm length and 77 mm breadth weighing not less than 60 gms

Providing and fixing PTMT bottle trap for wash basin and sink - Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77mm breadth with 25mm minimum water seal, weighing not less than 263 gms

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112 mm distance fromwall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gm.

Providing and fixing PTMT 15 mm urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms

Providing and fixing PTMT urinal cock of approved quality and colour - 15mm nominal bore ,80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms

Providing and fixing CP brass health faucet of approved quality - 15 mm nominal bore.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC solvement cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in charge - Concealed work , including cutting chases and making good the wall etc - 20 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC solvement cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in charge - Concealed work, including cutting chases and making good the wall etc - 25 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC solvement cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in charge- Concealed work , including cutting chases and making good the wall etc - 32 mm nominal dia pipes

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 20mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 25mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 32mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 40mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 20 mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 25 mm nominal outer dia pipes

Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end).-32mm nominal bore.

Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end).-40mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 20mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete high or low pressure with plastic floats.-25mm nominal bore.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms - 15mm nominal bore

Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms - 15 mm nominal bore

Providing and fixing CP brass stop cock (concealed) of standard design and of approved make conforming to IS 8931 - 15mm nominal bore.

Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931- 15 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable Circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating.

Providing and fixing PTMT ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with LP/HPHD plastic ball 40 mm nominal bore, 206 mm long, weighing not less than 690 grams.

Providing and fixing PTMT Soap dish holder having length of 138 mm, breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 25 mm nominal bore, weighing not less than 62 grams.

Cutting holes upto 30x30 cm in walls including making good the same - with common burnt clay F.P.S.(non - modular) brick

Cutting holes upto 15x15 cm in Rcc floors and roofs for passing drain pipe etc. and reparing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement, 2 fine aggregate, 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.

Making chases upto 7.5 x7.5 cm in walls including making good and finishing with matching surface after housing GI pipe etc.

Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement ,3 coarse sand, 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 fine aggregate : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 fine aggregate) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete - For pipes 100 to 250 mm diameter

Providing and fixing on wall / column face unplasticised - PVC soil and waste pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre

Providing and fixing on wall face/column face unplasticised - PVC moulded fittings / accessories for unplasticised - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - Single tee with door - 110x110x110mm

Providing and fixing on wall face / column face unplasticised - PVC moulded fittings/accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - Single tee without door - 110x110x110mm

Providing and fixing on wall face/column face unplasticised- PVC moulde fittings/accessories for unplasticised - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - bend 110mm

Providing and fixing on wall face /column face unplasticised - PVC moulded fittings/accessories for unplasticised - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend with door 110mm

Providing and fixing on wall face/column face unplasticised - PVC moulded fittings/accessories for unplasticised - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - heel rest bend 110mm.

Providing and fixing on wall/column face unplasticised - PVC soil and waste pipes (type B) conforming to IS:13592 - 1992 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - single socketed pipes 75mm diameter.

Providing and fixing on wall/column face unplasticised - PVC moulded fittings /accessories for unplasticised - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion - Single tee with door - 75x75x75mm

Providing and fixing on wall face /column face unplasticised - PVC moulded fittings /accessories for unplasticised - PVC soil and waste pipes conforming to IS :14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - Single tee without door - 75x75x75mm

Providing and fixing on wall face / column face unplasticised - PVC moulded fittings / accessories for unplasticised - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend 75mm.

Providing and fixing on wall face / column face unplasticised - PVC moulded fittings / accessories for unplasticised - PVC soil and waste pippes conforming to IS :14735 - 1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - head rest bend 75 mm.

Providing and fixing on wall face / column face unplasticised - PVC moulded fittings /accessories for unplasticised PVC soil and waste pipes conforming to IS:4985 including of jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion - bend with door 50 mm.

Providing and fixing mild steel bracket including bolts, nuts, rubber insertion, labour charges etc, complete-100 x 20mm dia

Providing and fixing mild steel bracket including bolts, nuts, rubber insertion, labour charges etc,complete-100 x 40mm dia

Providing and fixing in position UPVC moulded elbow (0.6 Mpa)conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete. - 110 mm dia.

Providing and fixing in position UPVC fabricated coupler (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete-75mm dia

Providing and fixing in position UPVC fabricated coupler (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete-110mm dia

Providing and fixing in position UPVC fabricated bend (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 75mm dia.

Providing and fixing in position UPVC fabricated bend (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete.-110mm dia

Extra for prefinished nosing to treads of steps of flame finished granite

Extra for flame finished granite stone flooring in treads of steps and risers using single length up to 2m.

Fixing of wall mixer assembly consisting of one number wall mixer with bend pipe on upper side for shower with built-in non return valve for spout and over head shower rose. The cost shall also include One number C.P brass spout, over head shower. The work shall include cutting and making good the wall and floor wherever required, including cost of materials, labour including lead and lift charges, all complete as per specifications.

Supply and Fixing of Nitrile rubber tubular insulation (Armaflex or equivalent) of 9mm thick over exposed hot water supply pipe . The cost to include providing PVC (4Kg) pipe over the insulation (according to the size of the pipe) and sealing it with silicon sealant for all exposed pipes (ring main). All complete as required-20mm nominal outer dia pipes.

Supply and Fixing of Nitrile rubber tubular insulation (Armaflex or equivalent) of 9mm thick over exposed hot water supply pipe . The cost to include providing PVC (4Kg) pipe over the insulation (according to the size of the pipe) and sealing it with silicon sealant for all exposed pipes (ring main). All complete as required-25mm nominal outer dia pipes.

Supply and Fixing of Nitrile rubber tubular insulation (Armaflex or equivalent) of 9mm thick over exposed hot water supply pipe . The cost to include providing PVC (4Kg) pipe over the insulation (according to the size of the pipe) and sealing it with silicon sealant for all exposed pipes (ring main). All complete as required-32mm nominal outer dia pipes.

Supply and Fixing of Nitrile rubber tubular insulation (Armaflex or equivalent) of 9mm thick over exposed hot water supply pipe . The cost to include providing PVC (4Kg) pipe over the insulation (according to the size of the pipe) and sealing it with silicon sealant for all exposed pipes (ring main). All complete as required-40mm nominal outer dia pipes.

Supply and grouting of SS rungs made of 20 mm dia SS pipe 150 mm wide for UG sump, to be fixed as per the detailed drawing

Supply and fixing of white colour vitreous China clay European Water Closet - wall hung type with extended 'P' trap,with Concealed flush tank with matching colour soft closing solid plastic seat and lid with C P brass hinges, rubber buffers, suitable mounting brackets with fittings, overflow arrangements with specials , 15mm dia cold water connection pipe etc. The cost shall include extension piece, sealant, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour including lead and lift charges, all complete as per specifications. (Make : Totto - CW553 MUNW1 / TC510CVK-1 / TX215C/ WH131MHFR or Acceptable Model by Architect / Client)

Supply and fixing of white colour vitreous China clay European Water Closet - wall hung type with extended 'P' trap,with Concealed flush tank with matching colour soft closing solid plastic seat and lid with C P brass hinges, rubber buffers, suitable mounting brackets with fittings, overflow arrangements with specials , 15mm dia cold water connection pipe etc. The cost shall include extension piece, sealant, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour including lead and lift charges, all complete as per specifications. (Make : Totto - CW580RMUNW1 / TC504CVK / TX215C/ WH131MHFR / MB003CPR-2 or Acceptable Model by Architect / Client)

Supply testing & commissioning of ABS Rinsing spray and 2way bibcock with regulator of approved quality with CP flexible pipe 1.5 m long, wall hook complete as required. (Make : Totto or Acceptable Model by Architect / Client)

Supply and commissioning of white colour vitreous counter top/bottom fixed oval shaped wash basin, installed in granite counter provided by the civil contractor, with 15mm dia pillar cock fitting, 32mm dia C P waste coupling, 32mm dia C P brass bottle trap, 15mm dia C P angle stop cock for cold water supply lines, flexible hose with wall flanges etc,. The work shall include cutting and making good the wall and floor wherever required, including cost of materials, labour including lead and lift charges, all complete as per specifications. (Make : Totto - L1705E#XW or Acceptable Model by Architect / Client)

Supply and fixing of white colour Vitreous China wall hung Wash Basin, installed with specially fabricated MS brackets with adjustable screws and nuts to suit the wash basin, 15mm dia pillar cock provision, 32mm dia CP waste coupling, 32mm dia CP brass bottle trap, 15mm dia CP angle stop cock for cold water lines with wall flanges etc,. The work shall include cutting and making good the wall and floor wherever required, necessary extension piece, sealant, including cost of materials, labour including lead and lift charges, all complete as per specifications. The rate shoudl also include the fixing of swivel grab bars for physically challenged people. (Make : Totto - L4704E#XW or Acceptable Model by Architect / Client)

Supply and fixing of white colour Vitreous China wall hung Wash Basin, installed with specially fabricated MS brackets with adjustable screws and nuts to suit the wash basin, 15mm dia pillar cock provision, 32mm dia CP waste coupling, 32mm dia CP brass bottle trap, 15mm dia CP angle stop cock for cold water lines with wall flanges etc,. The work shall include cutting and making good the wall and floor wherever required, necessary extension piece, sealant, including cost of materials, labour including lead and lift charges, all complete as per specifications. The rate shoudl also include the fixing of swivel grab bars for physically challenged people. (Make : Totto - LW710CMT#NW1 or Acceptable Model by Architect / Client)

Supply and commissioning of white vitreous China large flat back lipped urinals suitably supported by CI/ MS brackets duly painted including , CP brass flush pipe, CP brass spreader and automatic sensor based flushing system (battery operated) along with C P brass waste with doom type grating and bottle trap, 15mm dia C P angle stop cock for cold water lines with wall flanges etc,. The work shall include cutting and making good the wall and floor wherever required, including cost of materials, labour including lead and lift charges, all complete as per specifications. (Make : Totto - UW350HJT1#W/ T025005 / T62-16V1 / TX253U or Acceptable Model by Architect / Client)

Supply and fixing of 15mm dia CP pillar cock for wash basins with pipe nipples, teflon tape, all accessories required etc. The cost shall include cutting and making good the wall wherever required, including cost of materials, labour, all complete as per specifications (Make : Totto-TLG10304B or Acceptable Model by Architect / Client)

Supply and fixing of 15mm dia CP pillar cock for wash basins with pipe nipples, teflon tape, all accessories required etc. The cost shall include cutting and making good the wall wherever required, including cost of materials, labour, all complete as per specifications (Make : Totto-TLG04303B or Acceptable Model by Architect / Client)

Supply and fixing of white colour bath tub Premium type with suitable bath tub mixer and hand shower arrangements and necessary specials and fittings etc, all complete as per specifications.(Make : Totto-PAY1717CPTNE#W or Acceptable Model by Architect / Client)

Supply of Shower spout, arm with divertor full brass with wall flange including fixing screws, cutting of required size and making good. (Make: Totto - TBG02304BB#MBL / TBW02003B#MBL / TBG02001B#MBL / TBN01001 or Acceptable Model by Architect / Client).

Supply and fixing of Shower spout, arm with divertor full brass with wall flange including fixing screws, cutting of required size and making good. (Make: Totto - TBV02102B / DBX102CSVG/ TBW02013B / TBN01001 or Acceptable Model by Architect / Client). DBX103CSVG

Supply CP waste coupling for wash basin and sink, of approved quality and colour waste coupling 31mm of 79mm length and 62mm breadth weighing not less than 45 gm. (Make: Totto - T6JV2N 74182020 or Acceptable Model by Architect / Client).

Supply CP bottle trap for wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260 gm.(Make: Totto - THX1A-3N or Acceptable Model by Architect / Client).

Supply, installation, testing and commissioning of heat pump with recirculation pump capacity of 150 LPH and 300 liter storage SS tank with copeland compressor and fan, vertical discharge, which can be controlled by auto temperature and time controller etc, complete as required.

Supply, installation, testing and commissioning of booster pump along with the pressure vessal, control panel, transducer etc complete of the following duty condition. Cost to include necessary fittings, starters, panel and accessories all complete as required Duty Condition: 1 Cum / hr at 30 m head Note: One set consists of 1 working and 1 standby pump (Booster water sump)

Providing and fixing door of size 1.20x2.34 as per drawing panelled or panelled and glazed shutters for doors fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:- Butt hings and necessary screws shall be paid separately.-Vengai wood

Providing and fixing door of size 0.75x2.10 as per drawing panelled or panelled and glazed shutters for doors fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:- Butt hings and necessary screws shall be paid separately.-Vengai wood

Providing and fixing door of size 0.90x2.35 as per drawing panelled or panelled and glazed shutters for doors fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:- Butt hings and necessary screws shall be paid separately.-Vengai wood

Providing and fixing window of size 0.90x1.55 as per drawing panelled or panelled and glazed shutters for windows and cleresotory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:- Butt hings and necessary screws shall be paid separately.-Vengai wood

Providing and fixing window of size 1.10x1.55 as per drawing panelled or panelled and glazed shutters for windows and cleresotory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:- Butt hings and necessary screws shall be paid separately.-Vengai wood

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : - 500x10mm

Supplying and fixing of double groove approved mangalore tiles, as per standard specification Rate to include tying of edge tiles with 18 gauge copper wire and brass screw as per the direction of Engineer in charge.(Appd by 251/PW/SEI/AE(P)-II/F.No.221/2017-18/1253.dt.16/10/2017

Providing and Fixing Wooden Post 12.5x12.5x 240cm size(Vengai wood) with wooden capital as per design and drawing. Connecting with granite base using "SS" rod. The rate to include all mouldings charges, materials, labour, polishing the wooden post etc., complete

Providing and fixing Vengai wood balcony hand rail of 91cm height in horizontal bottom frame 0.07x0.06m size top frame 0.07x0.06m size and vertical baluster 0.03x0.03x0.81 m height square shape frame fixed at 10cm centre to centre as per drawing. The rate includes fixing in position, fevicol, screwing baluster etc. Complete as per direction of Engineer-in-charge.

Providing and Fixing of 15mm thick vengai wood 'Eaves board' (20-30 cm height) in as per detailed drawing rate to include all material and labour etc, complete.

Providing and fixing 3 line dressed granite brackets (45x15x10 cm) sunk and moulded as per drawings, as support for the wooden beams. The rate are inclusive of materials, labour, civil works, scaffolding etc., complete as per Engineer-in-charge. (Appd.No.128/PW/SE-I/AE(P)I/F.No.CB-330/2015-16 dt.13-07-2015)

Providing and fixing 3 line dressed granite base (15x15x15) cm size and design as per the detailed drawing, the rate including all civil works, material, labour, support etc. complete.

Providing, hoisting and fixing wooden sunshade with Vengai wood slanting. The vertical wall plate 0.05x 0.07x 0.78m height size fixed on wall. The horizontal slope frame 0.05x0.07x1.5m length fixed between both rafter. The both set of vertical frame fixed with batterns 0.05x 0.025m size on top within as per drawing.The rate include all material as considered one number.

Providing and fixing panelled or panelled and glazed louver ventilator fixing with required size with necessary screws including louvers panneling all completed as per drawing as directed by the Enginner - in - charge-Vengai wood

Providing and laying of leather finished granite stone slab of thickness 18 mm in the corridors/ verandah with 10mm recessed cement pointing and laid over 25mm thick cement mortar 1:4 (1 cement : 4 coarse sand) etc. and as per the pattern shown in the architectural drawing and as directed by the engineer-in-charge. Finished surface should be neat and clean and free from the smear of the cement mortar.(30x30x 1.8cm)

Filling in plinth or trenches,under floors, in areas with Quarry dust including watering. Ramming, consolidating and dressing,cost and conveyance of all materials, labour charges, lead, lift etc complete at all levels as directed by the engineering-in-charge. (Appd No.396/PW/SE/AE(P)-II/F.No.525/2016-17 dt. 28/12/2016 & T.S.No.4/PW/CE/2018-19

Providing and fixing duct top open of required size covered with 12mm thick toughened glass. Fixing S.S. square section 6x6cm size welded with S.S. base plate fixed with anchor fastner in required slope as per drawing. The S.S. columns are connected four sides horizantally with 4x4cm S.S.section. On the top 12mm thick toughened glass fixed over 4cm dia S.S.rod using with S.S.spider connector, stud and silicon as per following as directed by Engineer-in-charge.

Providing and laying factory made chamfered edge cement concrete paver block in foot path, parks lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand-80mm thick C.C. paver block of M-35 grade with approved design and pattern etc., complete all as per direction of Engineer-in-charge. Appd.no.01/PW/SEI/AE(P)-II/F.No.591/2023-24/03 dt. 1-3-2024

ELECTRICAL INTERNAL Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed medium class PVC conduit as required - 2 X 1.5 sq.mm + 1 x 1.5 sq.mm earth

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 2.5 sq.mm + 1 x 2.5 sq.mm earth

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 4 sq.mm + 1 x 4 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 4 X 6 sq.mm + 2 x 6 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 4 X 10 sq.mm + 2 x 6 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed medium class PVC conduit as required - 4 X 16 sq.mm + 2 x 6 sq.mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 25mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 32mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface / recess including painting in case of surface conduit , or cutting the wall and making good the same in case of recessed conduit as required - 25 mm

Supplying and fixing 3 pin , 5 A ceiling rose on the existing junction box / wooden block including connection etc as required

Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x 75mm)

Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 3 module (100mm x 75mm)

Supplying and fixing following size / modules , GI boxalongwith modular base & cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 mm)

Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 mm)

Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 8 module (125 mm x 125 mm)

Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 12 module (125 mm x 125 mm)

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 5/6 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 2 way 5/6 A switch

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess , including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch , connections etc , as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess , including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/6 A modular switch , connections etc , as required

Supplying and fixing following modular switch / socket on the existing odular plate & switch box including connections but excluding modular plate etc. as required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 6 pin 15/16 A socket outlet

Wiring for light point / fan point /exhaust fan point /call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit , with modular switch , modular plate , suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required - GROUP A

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit , and earthing the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - Group A

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - Bell push

Supplying and fixing of following ways surface / recess mounting , vertical type, 415 V , TPN MCB distribuition board of sherrt steel , dust protected, duly powder painted , inlusive of 200 A tinned copper bus bar , common netural link, earth bar , din bar for mounting MCB'S (but without MCB,S (but without MCB's and incomer ) as required. (note : Vertical type MCB TPDB is normally usd where 3 phase utlets are required) - 4 way (4 + 12) , double door

Supplying and fixing of following ways surface / recess mounting , vertical type, 415 V , TPN MCB distribuition board of sherrt steel , dust protected, duly powder painted , inlusive of 200 A tinned copper bus bar , common netural link, earth bar , din bar for mounting MCB'S (but without MCB,S (but without MCB's and incomer ) as required. (note : Vertical type MCB TPDB is normally usd where 3 phase utlets are required) - 8 way (4 + 24) , double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earth bar , din bar, Interconnections , powder painted including earthing etc. as required (but without MCB / RCCB / Isolator ) 8way (4+24) , double door

Supplying and fixing following way, single pole and neutral, sheet steel , MCB distribution board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earth bar , din bar, Interconnections , powder painted including earthing etc. as required (but without MCB / RCCB / Isolator ) 6way (4+18) , double door

Supplying and fixing following way , horizontal type three pole and neutral , sheet steel , MCB distribution board , 415 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earth bar , din bar, Interconnections , powder painted including earthing etc. as required (but without MCB / RCCB / Isolator ) 4way (4+12) , double door

Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution board , 240 V, on surface / recess, complete with tinned copper bus bar , neutral bus bar , earth bar , din bar , interconnections , powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 12 way , double door

Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution board , 240 V, on surface / recess, complete with tinned copper bus bar , neutral bus bar , earth bar , din bar , interconnections , powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 8 way ,double door

Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earth bar , din bar , interconnections , powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 6 way , double door

Supplying and fixing Cable End Box (Loose wire Box) (IP 43) suitable for tripple pole and neutral , sheet steel , Vertical MCB distribution board , 415 V, on surface / recess , complete with testing and commissioning etc .as required.

Supplying and fixing Cable End Box (loose wire box) (IP 43) suitable for following triple pole and neutral , sheet steel , MCB distribution board , 415 V, on surface / recess,complete with testing and commissioning etc.as required. For 8 way , double door TPN MCBDB

Supplying and fixing Cable End Box (loose wire box) (IP 43) suitable for following triple pole and neutral , sheet steel , MCB distribution board , 415 V, on surface / recess,complete with testing and commissioning etc.as required. For 6 way , double door TPN MCBDB

Supplying and fixing DP sheet steel enclosure on surface / recess along with 25 / 32 A 240 V "C" curve DP MCB complete with connections , testing and commissioning etc.as required

Supplying and fixing TP sheet steel enclosure on surface / recess along with 16/25/32 A, 415 V "C" curve TP MCB complete with connections , testing and commissioning etc as required

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc .as required. - Single Pole

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc .as required. - Double Pole

Supplying and fixing following rating , double pole , 240 V,Isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required - 40 A

Supplying and fixing following rating , double pole, 240 V, Isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required - 63 A

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc .as required. - Triple Pole

Supplying and fixing following rating , four pole ,415 V , isolator in the existing MCB DB complete with connections , testing and commissioning etc.as required - 40 A

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required - 63 A

Supplying and fixing following rating, double pole , (single phase and neutral), 240V , residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections , testing and commissioning etc as required - 25 A

Supplying and fixing following rating, double pole , (single phase and neutral), 240V , residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections , testing and commissioning etc as required - 40 A

Supplying and fixing following rating, double pole , (single phase and neutral), 240V , residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections , testing and commissioning etc as required - 63 A

Supplying and fixing following rating , four pole ,(three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections , testing and commissioning etc.as required - 63 A

Supply and installation of 40W battern type light fixtures with driver, mounting hose and all necessory accessories as required. Make: Philips/Bajaj/ Halonix/ surya

Supply and installation of 36W square type surface mounting type fixtures with driver, mounting hose and all necessory accessories as requiteed. Make: Philips/Bajaj/Halonix/ surya.

Supply and installation of 9W wall mounted decorative type light fixtures with all necessory accessories as requiteed. Make: Havells/K-Lite/ Halonix/ Surya.

Supply and installation of 10W outdoor wall mounted bulk head type light fixtures with all necessory accessories as requiteed. Make: Havells/K-Lite/Halonix.

Supply and installation of 9W battern type 600mm length light fixtures with driver, mounting hose and all necessory accessories as requiteed. Make: Philips/Bajaj / Havells/ Halonix

Installation , testing and commissioning of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS / CFL /LED lamps per fitting . Complete with all accessories including connections etc as required

Installation , testing and commissioning of pre-wired , fluorescent fitting / compact fluorescent fitting of all types , complete with all accessories and tube / lamp etc.directly on ceiling / wall , including connections with 1.5 sq.mm FRLS PVC insulated , copper conductor , single core cable and earthing etc. as required

Fixing testing and commissioning of Sodium vapour / Mercury vapour / Metal halide street light fittings on existing poles as required

Supplying and fixing brass batten / angle holder including connection etc.as required

Supply of ceiling fan 1200mm sweep five star rating BLDC fan with remote Make: Atomberg/ Havells/ Crompton/ V-Guard

3mm thick mica plate for fan hook box (L.M.R)

Concealed type ceiling fan metal hook. (L.M.R)

Installation testing and commissioning of ceiling fan/wall mounting fan and wiring the down rod of standard length .(upto 30cm) with 1.5sqmm FRLS PVC insulated copper conductor, single core cable etc., as required.

Supplying and fixing extra down rod of 10 cm length G.I.pipe , 15 mm dia , heavy gauge including painting etc . As required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Stepped type Modular Fan regulator (2 module)

300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha

Installation of exhaust fan in the existing opening , including making good the damage , connection , testing ,commissioning etc. as required - Upto 450 mm sweep

Supply and fixing of bracket of 25 mm dia GI pipe for 40 Watt single / double fitting tube street light with required bolt and nuts complete

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - TV antenna socket outlet

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - Telephone socket outlet

Supplying and fixing of 230V, Foot lamp type fitting with suitable 3W LED lamp ( IP65) and necessary fixing accessories as required. Make: Philips/Bajaj/ Havells

Supplying and fixing of 230V, Step light type fitting with suitable 4W LED lamp ( IP65) and necessary fixing accessories as required. Make: Philips/Bajaj/ Havells

Supplying and fixing of 230V, Cylindrical beam stage light RGBWYP 6colour spot fitting (IP65) with suitable 3W LED lamp and necessary fixing accessories as required. Make: Philips/Bajaj

fixing Step type socket Fan Regulator on the existing switch box/cover including connections etc. as required.

Supplying and fixing Data socket outlet modular type and modular plate in cadmium / GI plated MS box including making connections etc as required. Make: MK / Creabtree

Supply, installation, testing and commissioning of 16 port Data switches with rack, the rate shall be inclusive of all required civil works. (Make: Netgear / Digilink

Supply, installation, testing and commissioning of 24 port Data switches with rack, the rate shall be inclusive of all required civil works. (Make: Netgear / Digilink

Supply and erection of 1 Phase, 230 V, 10 kVA 1P -n 1P out /INVERTER with suitable BCB (battery circuit breaker), filters, 12V Sealed Maintenance Free battery bank, suitable for 42Ah with 30minutes backup. The items including necessary safety features, protections/relays, necessary battery racks, cables/wires and fixing accessories etc.

Supply and installation of 1 x 24W LED Recessed mounded light fittings Make: Philips / Wipro/ Havells/ Halonix

Supply and installation of 1 x 36W LED Recessed mounded light fittings Make: Philips/ Wipro/ Havells/ Halonix

Supply and installation of 1 x 15W LED Recessed mounded light fittings Make: Philips/Wipro/ Havells/ Halonix

Supply and installation of 1 x 12W LED Recessed mounded light fittings Make: Philips/Wipro/ Havells/ Halonix

Supply and installation of 1 x 9W LED Recessed mounded light fittings Make: Philips/Wipro/ Havells/ Halonix

Supply and installation of 1 x 9W LED wall mounded light fittings Make: Philips/Wipro/ Havells/ Halonix

Supply and installation of 1 x 6W LED Recessed mounded light fittings Make: Philips

Supply and fixing of 230V, 100W Decorative type Chandelier fittings with suitable hanging arrangements.(Up to 3Mts)

Supplying and fixing following rating, Four pole , (Three phase and neutral), 240V , residual current circuit breaker (RCCB), having a sensitivity current 300 mA in the existing MCB DB complete with connections , testing and commissioning etc as required - 40 A

Supply and erection of 3 Phase, 415 V, 20kVA 3P -in 3P out online UPS with suitable BCB (battery circuit breaker), filters, 12V 42AhSMF batteries with 30minutes backup with necessary fixing accessories etc. Make: Numeric / Consul / Luminous Battery make: Exide/Quanta

Supplying and drawing of 10 Pair, FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 20 Pair, FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 50 Pair, FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply and fixing of 10-pair telephone Krone type junction boxe enclosed in MS box with hinged cover with lock & key arrangements, all complete as per specifications, drawings and / or as directed by the Engineer.

Supply and fixing of 20-pair telephone Krone type junction boxe enclosed in MS box with hinged cover with lock & key arrangements, all complete as per specifications, drawings and / or as directed by the Engineer.

Supply and fixing of 50-pair telephone Krone type junction boxe enclosed in MS box with hinged cover with lock & key arrangements, all complete as per specifications, drawings and / or as directed by the Engineer.

Supply , installation , testing and commissioning of IPBAX system of 48 lines with required operator console, port, distribution frames etc., The rate shall include all allied and implied items for complete commissioning of the system. The incoming P&T line shall be for 4 nos. Make: NEC / Sintal.

Supply and installation of 1.3 mega pixel ccd(charged coupled device) Dome camera, (dome type camera) Make" CP plus, model: V5142L2

Supply and installation of 16 Channel multiplexer cum network video recorder with 16 video input and 2 monitor output. This shall also have provision of either for inbuilt DVD writing or to connect to external sourve for DVD writing. This DVR shall have the capability to store 14 days(2weeks) event make: CP plus

Supply and installation of 21" high resolution main colour monitor, full HD, audio/video port like HDMI, USB etc., high quality speaker, remote contol with batteries Make: Sony/Samsung

Supply and installation of Video balloon

Installation, testing and commisioning including all fixing accessories, clamps, inter connecting wiring, necessary software and integration devices etc., in the control room between equipments like DVR/Monitor using CAT 6 Cable or other communication cable as required.

Supplying and drawing co-axial TV cable RG - 6 grade . 0.7 mm solid copper conductor PE insulated , shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor , unarmored telephone cable in the existing surface / recessed steel / PVC conduit as required - two pair

Supply and laying D-link Cat 6 wire, Channel & other accessories for networking. The Cost Include all taxess, labour charges, material, transportation etc., complete.

Supply, installation, testing and commissioning of modular type VRF/VRV outdoor units, with multi scroll / rotary compressors with inverter type compressor's, special pre-coated fins, inverter based condenser fan with low noise, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following approximate capacities with R410a Gas.The charges shall include of all freight/tranport, unloading at site, storing, lifting, positionin and effecting connections with necessary accessories as required to complete the installations.The item also including of power cable terminations and earthing terminations in the outdoor unit - 44HP ODU UNITS (20+12+12)

Supply, installation, testing and commissioning of modular type VRF/VRV outdoor units, with multi scroll / rotary compressors with inverter type compressor's, special pre-coated fins, inverter based condenser fan with low noise, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following approximate capacities with R410a Gas.The charges shall include of all freight/tranport, unloading at site, storing, lifting, positionin and effecting connections with necessary accessories as required to complete the installations.The item also including of power cable terminations and earthing terminations in the outdoor unit - 42HP ODU UNITS (18+12+12)

Supply, installation, testing and commissioning of following type & capacities of VRF based Cassette/Hiwall/Ductable/FCU type indoor units completec with compact cooling coil, electronic expansion valve, multi-speed fan motor (low noise), belt drive, 10 micron washable type filterand vibration filter etc.The item shall also include cordless/wired remote controller, refnet/branch kit, drain pump and potentilal free contactor to connect with BMS etc.The item including necessary supports & fixing accessories etc. with all complete.The item also including of power cable terminations and earthing terminations in the outdoor unit - 0.8 TR with Wireless Remote - Hiwall

Supply, installation, testing and commissioning of following type & capacities of VRF based Cassette/Hiwall/Ductable/FCU type indoor units completec with compact cooling coil, electronic expansion valve, multi-speed fan motor (low noise), belt drive, 10 micron washable type filterand vibration filter etc.The item shall also include cordless/wired remote controller, refnet/branch kit, drain pump and potentilal free contactor to connect with BMS etc.The item including necessary supports & fixing accessories etc. with all complete.The item also including of power cable terminations and earthing terminations in the outdoor unit - 1.6 TR with Wireless Remote - Hiwall

Supply, installation, testing and commissioning of following type & capacities of VRF based Cassette/Hiwall/Ductable/FCU type indoor units completec with compact cooling coil, electronic expansion valve, multi-speed fan motor (low noise), belt drive, 10 micron washable type filterand vibration filter etc.The item shall also include cordless/wired remote controller, refnet/branch kit, drain pump and potentilal free contactor to connect with BMS etc.The item including necessary supports & fixing accessories etc. with all complete.The item also including of power cable terminations and earthing terminations in the outdoor unit - 2.0 TR with Wireless Remote - Hiwall

Supply, installation, testing and commissioning of following type & capacities of VRF based Cassette/Hiwall/Ductable/FCU type indoor units completec with compact cooling coil, electronic expansion valve, multi-speed fan motor (low noise), belt drive, 10 micron washable type filterand vibration filter etc.The item shall also include cordless/wired remote controller, refnet/branch kit, drain pump and potentilal free contactor to connect with BMS etc.The item including necessary supports & fixing accessories etc. with all complete.The item also including of power cable terminations and earthing terminations in the outdoor unit - 3.2 TR with Wired Remote - Cassette

Supply, installation, testing and commissioning of following type & capacities of VRF based Cassette/Hiwall/Ductable/FCU type indoor units completec with compact cooling coil, electronic expansion valve, multi-speed fan motor (low noise), belt drive, 10 micron washable type filterand vibration filter etc.The item shall also include cordless/wired remote controller, refnet/branch kit, drain pump and potentilal free contactor to connect with BMS etc.The item including necessary supports & fixing accessories etc. with all complete.The item also including of power cable terminations and earthing terminations in the outdoor unit - 4.0 TR with Wired Remote - Cassette

Supply, installation, testing and commissionng of Central Controller System Unit suitable to monitor and control the air conditioning system (indoor or outdoor or temperature setting or status) from central location as well as from remote location (through internet access). The item includes provide necessary compatability for BMS integration etc.

Supply, installation, testing and commissioning of inverter type 1.0Tr hi-wall split (atleast 3-star rated) air conditioner set which comprising of indoor unit, outdoor unit, refrigerant copper pipe - 15mtr length & drain uPVC pipe arrangements as required with all complete.

Supply, installation, testing and commissioning of following sizes (diameter) of 18G hard drawn/soft drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications.The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc.The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves with suitable thickness of polyshield coating etc.The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc - 41.3 mm

Supply, installation, testing and commissioning of following sizes (diameter) of 18G hard drawn/soft drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications.The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc.The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves with suitable thickness of polyshield coating etc.The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc - 34.9 mm

Supply, installation, testing and commissioning of following sizes (diameter) of 18G hard drawn/soft drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications.The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc.The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves with suitable thickness of polyshield coating etc.The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc - 28.6 mm

Supply, installation, testing and commissioning of following sizes (diameter) of 18G hard drawn/soft drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications.The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc.The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves with suitable thickness of polyshield coating etc.The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc - 22.2 mm

Supply, installation, testing and commissioning of following sizes (diameter) of 18G hard drawn/soft drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications.The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc.The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves with suitable thickness of polyshield coating etc.The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc - 19.1 mm

Supply, installation, testing and commissioning of following sizes (diameter) of 18G hard drawn/soft drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications.The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc.The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves with suitable thickness of polyshield coating etc.The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc - 15.9 mm

Supply, installation, testing and commissioning of following sizes (diameter) of 18G hard drawn/soft drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications.The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc.The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves with suitable thickness of polyshield coating etc.The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc - 12.7 mm

Supply, installation, testing and commissioning of following sizes (diameter) of 18G hard drawn/soft drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications.The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc.The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves with suitable thickness of polyshield coating etc.The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc - 9.5 mm

Supply, installation, testing and commissioning of following sizes (diameter) of 18G hard drawn/soft drawn refrigerant piping between indoor & outdoor units duly insulated as per specifications.The item also include necessary support arrangement (threaded rod with channel or tray) at every 1 meter intervals with necessary fixing accessories etc.The copper pipe to be insulated with 19mm thick / 13mm thick tubular Nitrile Rubber sleeves with suitable thickness of polyshield coating etc.The brazing to be carried out with bleeding of nitrogen inproper manner. The item including necessary pressure testing of entire pipe network with nitrogen gas, vaccummising and commissionins etc - 6.4 mm

Supply and laying of 2C x 1.5 sqmm. FRLS copper control cabling between indoor & outdoor units with necessary conduit or sleeves & support / tray as per site requirements along with necessary fixing accessories etc.

Providing and fixing in position the following sizes of uPVC drain pipes of required lengths and installed with necessary couplers, elbows, tees, reducers and "U" trap as required. The item including the cost of 6mm thick nitrile rubber insulation with necessary supports & fixing accessories with all complete - 25 mm

Providing and fixing in position the following sizes of uPVC drain pipes of required lengths and installed with necessary couplers, elbows, tees, reducers and "U" trap as required. The item including the cost of 6mm thick nitrile rubber insulation with necessary supports & fixing accessories with all complete - 32 mm

Supply, installation, testing and commissioning of Poly shield coating for weather proof.

Supply and installation of underdecking insulation (heat reduction insulation) on the existing roof bottom with required adhesive and accessories etc.

D Ramesh