Installation of median tubular poles from I B to Court in TMC limits (For sc)

Installation of median tubular poles from I B to Court in TMC limits

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge For thickness of tiles above 25 mm a...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...

Fabricating, supplying and erection of 9.00 MTR. long hot dipGalvanized Octagonal hot dip Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with dooropening arrangemen...

supplying and fixing of Hot dip Galvanised M.S. Braket suitable for out door luminaners and mounted on octagonal pole using nacessary bolts nuts etc.. Complete double arm bracket with 100 mm standar...

LED Streetlight 90W specification as per 2021-22 BESCOM SR PWD PART-I (Page.36/Item No.11.8.4 BESCOM SR PWD PART-I) ---- gst

Fixing halogen/metal halide/SVL/IL/ LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (P-108 I-175) ---- gst

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / on wall/ on pole as required.A) 6 sqmm to 16sqmm (P-61 I-7.8.1) ---- gst

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class UG cable filled with necessary bitumen / insulating compound complete with terminals, clamps, bolts, nuts and wash...

Supplying and fixing of heavy duty cable glands suitable for UG Cable of 1.1 KV class (metal only) 19/20 sqmm (P-61 I-7.14.1) ---- gst

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16sqmm (P-43 I-16.17.13) ---- gst

Supplying and fixing angle iron frame work fabricated out of M.S angle iron and M.S bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint (434 item ), a) 40x4...

Supply and fixing of 4pole power contractor with NO/NC contacts of existing wood /panel board using necessary bolts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.b) 40 Amps (...

Supplying and fixing moulded case circuit breakers over the existing wood/panel board using nacessary screws, nuts,bolts nacessary phase saperators handle and wiring complete protection of Over load ...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers. C) 63 Amps (P-10 I-5.7.3 BESCOM PWD PART-I) ---- gst

Supplying and fixing Microprocessor based Electronic timer(without contactor, Din Mounting using necessary bolts, nutsand washers etc.,.) 3-120sec setting. (P-16 I-5.47 BESCOM PWD PART-I) ---- gst

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed to GTP of GROUP A.2.5 sqmm (P-03 I...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.(P-14 I-5.35 BESCOM PWD PART-I) ---- gst

Supplying, fixing, wiring earth electrode for grounding conduits, I.C cutouts and other equipment's on the meter boad using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit… The pit should...