Maintenance and repair works to school building and construction of toilet at Sungapuram east hills area corporation elemtary school in ward no.92, south zone.

Amount

Jungle cleaning at the site as per the instructions of deparmental officers etc., Completed.

Providing Pile foundation of size 300 mm dia using augur including labour charges and all other tools and plants charges etc. , as per direction of dept officers

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Sand filling for foundation with clear Well gravel sand including cost of sand watering, ramming and consolidation etc complete as directed by departmental officers.

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC Slabs, Rectangular beams, TEE or ELL beams, Lintels, Bed blocks, Staircase waist, Landing slab, Landing beam and Canopy etc., in all floors to centre etc., complete and as directed.

Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor with all cross bracings using mild steel sheets of size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm X 25 X 3mm for boarding laid over country wood joinsts of size 10cm X 6.50cm spaced at about 90cm C/C and supports by Causrina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. Sl.No.123

Reinforced Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for all RCC items of work excluding centering, shuttering and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete

Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification

Fly ash Brick work in cement mortar 1:5 (one part of cement and Five parts of sand by volume) for superstructure, entrance & staircase steps etc., using first class table mould chamber burnt bricks of crushing strength 40kg/sq cm (minimum) & water absorption should be less than 20%, including scaffolding, soaking of bricks, raking of joints, hacking of concrete surfaces coming in contact with brickwork, curing etc.,complete complying with relevant standard specifications, at all leads

Suppling and Fixing of MS angles and grills complete direction as per the departmental officers

Supply of RCC precast slab 100mm thick in C.C. 1:2:4 mix using 20m baby jelly including water curing, moulding charges etc., complete.

Plain Cement Concrete 1:2:4 (one cement, two fineaggregates and four coarse aggregates) using 20mm sizeISS HBG metal including cost and conveyance of allmaterials to site and including for the mixing, laying andlabour charges etc., complete as per standardspecification

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with CM 1:3 (One cement and three sand) mix 12 mm thick including finishing cost and conveyance of all materials to work site and all labour charges watering, curing and and all other incidental charges etc., complete complying with standard specifications.

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supplying and fixing in position of Indian make colour water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap and foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position levelling complete with necesary connection as per standard specification

Physically Challenged European Water Closet (Colour) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings

.Supply and Fixing in position of Indian make White glazed earthware WASH BASIN 550mmx400mm with all accessories such as costIron brackets , 32mm dia C.P waste coupling 15mm dia G.M wheel valve ,15mm dia Nylon connection , 15mm dia Brass Nipples, 15mm C.P Pillar tap etc., complete.

Supply and Fixing of position of Gents Urinal including cost & convence of all meterials to work site etc., Completed as per standard Specification

Supplying and fixing in position C.I. Man HOLE COVER (light or heavy duty) of 60x60 cm of best approved quality confirming to L.S.S.etc.,complete complying with standard specifications and drawings and as directed by the departmental Engineers

Daddoing the walls with first quality approved white glazed tiles of size 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement 1018.40 M2 using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Paving the floor with Vitrified Floor Tiles of size 60 X60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Supplying and Laying Rubber Moulded Hydraulic PressedPaver Block Providing and laying of 83 mm thick highstrength of Hydraulic Pressed Paver Block in size ofminimum compressive strength of 40 N/mm2 In uniformshape of approved make to be laid in flurring bonepattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring thepaversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Paintinting two coats for new Iron work including one coat of priming coat and using the best quality Iron primer and best quality synthetic enamel paint etc complete complying with standard specification

Wiring with 2 x 1.5 sq. mm insulated SC unsheathed cu. Conductor of 1100 V grade with suitable PVC rigid pipe on walls & ceiling for concealed plug point SD 10

Supply and run of 2 of 4 sq.m (56/0.3)PVC insulated SC unsheathed CU.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. SD 45

Supply and fixing of WT bulk head fitting with guard (Phillips/Bajaj/Crompton/K.Lite) Suitable for incandescent lamp with 100W Bulb(SD 85)

Supplying and fixing of 1000litr HDPE tank complete direction as per the departmental officers

Supply and delivery of the following materials approved brand as per list with ISI marking and an approved by Corporation Officers.

63mm dia PVC pipe of 6kg/cm2

63mm dia PVC Elbow

63mm dia PVC Tee

63mm dia PVC Coupling

63x20mm dia PVC Saddle

63 mm dia PVCEndcap

63mm dia PVC FTA

20 mm GI Pipe 'B' Class

20mm C.I.Tap

20mm GI Coupling

20mm GI Elbow

20mm dia Hex Nipple

110 mm dia PVC pipe of 6kg/cm2

110 mm dia PVC Elbow

110 mm dia PVC Tee