REPAIR TO ROADS AND ROAD FURNITURE AT MO (MB) GHATKOPAR

Amount

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a tack coat with paving bitumen of VG-10 grade @ 5 Kg per 10 Sqm with pressure sprayer over existing black top surface etc complete all as specified and directed.

M&L for Bituminous premix semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content (paving bitumen of VG-30 grade) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, the surfaces rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and tandem vibrating roller etc complete all as specified and directed. Notes: The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through Govt. approved Lab and the same shall be got approved from the GE before providing SDAC. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.37 per Kg .

M & L for thermoplastic road marking paint, conforming to BS-3262-1989 applied on road/pavement in lines, dashes, arrows, letters etc not exc 10 cm in width, white or golden yellow of thickness not less than 2.5 mm and retro-reflective glass beads 250-300 gm/ Sqm all as per manufacturer's instructions using thermoplastic application unit etc, complete all as specified & directed.

S&F in repairs metal guide post delinator retro reflective type with twin reflectors both side made out of PVC/metal pipe 51 mm Dia rectangular on each side of excellent reflectively in dark hours,complete all as specified& directed.Make dark eye guide post Cate no DA74 or Equivalent as approved by GE including embedding in PCC 1:2:4 (200*200*400mm) type B1 complete all as specified and directed.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mm*100mm*20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

S & F in repair road convex mirror made of polycarbonate of size 80cm dia complete including necessary excavation for post hole and fixing in block (size 300x300x450mm) of PCC 1 :2:4 complete all as specified and directed,

S&F Solar cat eye aluminium alloy shall (100% water proofing design acccording to 65 )of size 125*125*25 mm(shank 65mm) of high efficiancy Mano rystafie sol;ar panel 2.4V/.3 watt one NI-ed rechargable battery (1.2V/1600MA)consisting of super bright LED with 10000 to 18000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

Manufacturing, supplying and fixing Retro?reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter,symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No.50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete all as specified and directed.

S K ENTERPRISES (BID ID -3125953)

M/s Reena Constructions (BID ID -3126510)

AMBICA ENGINEERING (BID ID -3126218)

Joy builders (BID ID -3126821)