Balkhandeshwar talab par ghat ka jidhodhar at nagar panchayat achalganj

Earthwork in surface excavation not exceeding 30 cm in depth butexceeding 1.5 m in width as well as 10 sqm on plan including getting outand disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer in Charge:

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level:

Filling available exacavated earth ( excluding Rock) in trenches ,plinth,sides of foundations etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead upto 50 and for all lift

Brickwork with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:

Half brick masonary with common burnt clay F.P.S ( non moudalar) bricks of class designation 7.5 in superstucture above plinth level upto floor V level

Providing and fixing stainless steel ( Grade 304 ) railing made of Hollow tubes,channels,plates etc.,including welding,grinding,buffing,polishing and making curvature ( wherever required|) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainlesss steel dash fasteners,stainless steel bolts etc of required size on the top of the floor or the sides of waist slab with suitable arrangement as per approval of Engineer i n charge

15 mm cement plaster on rough side of single or half brick wall of mix:

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer ,over the plastered wall surface to prepare the surface even and smooth

Finishing walls with Premium Smooth Acrylic exterior paint with Silicon additives of required shade:

Providing an laying factory made chambered edge Cement Concrete paver blocks in footpath ,parks ,lawns ,drive ways or light traffic parking etc of required sterngth,thickness & size/ shape, made by table vibratory method using PU mould, laid in required colur & pattern over 50 mm thick compacted bed of sand ,compacting and proper embedding /laying of interlocking paver blocks into the sand bedding layer thriugh vibratory compaction by using palte vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand complete all as per direction of Engeneer -in -charge