Const. of 66 KV Capacitor Bank and Allied Civil Works at 220 KV S/S Sandhwan.

Amount

Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centring and shuttering for columns (Square or rectangular or poly gonal in plain)

Cement Concrete 1:6:12 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)

Cement concrete 1:5:10 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Cement Concrete 1:2:4 with stone ballast or shingle (mixing by mechanical means using concrete mixer volumetric type)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering infoundation and plinth.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure .

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth .

115mm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth .

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 50mm thick cement concrete topping 1:2:4. using mechanical mixer for mixing of material

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:5

20 mm thick cement plaster 1:4 in two coat work

Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-1985) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete. ( Labour Rate).

Brick on end edging Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications

P&F M.S Cable Racks made OF M.S Angle Iron for various size of complete as per dwg

P&F of MS Angle Nosing made out of 50x50x3mm Angle Iron for cable trenches complete in all respects

Supplying hoisting of Ferro cement trench cover frame of size given below made of MS flat 50X3mm with 6mm dia bars with 9/2" and 9"C/C welded to flat with lifting hooks as per drg. no C/W DS-2537 R5 and CW/DS 2420 R3 complete Trench Cover T-4 Type ( 2’-6” x 1’-9”)

Supply , Hoisting & plaicng of ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 "and 9"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete - T3 - type (2'-2"x2'-2")

Cement Slurry of cement to sand ratio 1:6 with cement content not less than 150kg/100sqm

Supplying and spreading of crushed stone3/4" nominal size(20mm) in 3" (75mm) thick layer over PCC flooring in the switch yard area marked or as per directions of Engineer-in-Charge.

PCC Flooring 1:5:10 complete

Fixing of Template along with foundation bolts as per Drg.

Extra Carriage of materials & diff. of rates of material- Cement

Extra Carriage of materials & diff. of rates of material- Steel

Extra Carriage of materials & diff. of rates of material- Crushed bajri 13.2mm

Extra Carriage of materials & diff. of rates of material- Fine sand

Extra Carriage of materials & diff. of rates of material- Bricks

Extra Carriage of materials & diff. of rates of material- Crushed bajri 11.2mm

Extra Carriage of materials & diff. of rates of material- Coarse Sand

Extra Carriage of materials & diff. of rates of material- Stone metal 40mm

INDO ENGINEERING WORKS

PAUL AND COMPANY