Repairing reconditioning of various old damaged conveyor pulleys, Eccentric shaft, Crusher shaft, Tripper trolley wheels, Bearing housing covers, Repairing of bearing portion of Tru flo Feeder TE-13 casing and DS Pumps etcFabrication

Amount

Repairing, Reconditioning of old & damaged conveyor pulley for 2x210 MW CHP

By Means of fabrication of new shaft & other allied works etc.

Drive pulley Type D-1

Drive pulley Type D-2

ND-1 (Snub Pulley)

By Means of fabrication of Shell & other allied works etc.

Having Shell Dia 630mm, Thickness 14mm Material MS

Having Shell Dia 500mm, Thickness 12mm Material MS

Having Shell Dia 400mm, Thickness 12mm Material MS

By Means of Repairing of Bearing portion of pulley Shaft & other allied works etc.

Drive Pulley of Type (2) Having Bearing Portion dia : 140 mm

Drive Pulley of Type (2) Having Bearing Portion dia : 160 mm

Drive Pulley of Type (2) Having Bearing Portion dia : 180 mm

Bend Pulley of Type (4) Having Bearing Portion dia : 100 mm

Non Drive Pulley Having Bearing Portion dia : 140 mm

Repairing of following items:

Rotor lock nut of Crusher shaft

Upper kick of Plate size: 2695x375x40 mm3

Multi Disc (Simpack) of following sizes:

ID: 150mm, OD: 286mm, PCD: 222mm, No. of holes-10, Bore of holes: 25mm.

ID: 100mm, OD: 215mm, PCD: 160mm, No. of holes-06, Bore of holes: 17mm.

ID: 158mm, OD: 260mm, PCD: 186mm, No. of holes-10, Bore of holes: 21mm.

Making required sized bore and key way in various flexible couplings:

Fabrication / Repairing of Following items :

Breaker Plate (Size 1455mmx835mm)

Fabrication of Aluminium Dust seal for Plummer Blocks of following Bearings.

Bearing No.22222

Bearing No.23032

Bearing No.23036

Fabrivcation of Love Joy coupling with desired bore sizes, Keys and splines along with suitable rubber spider

Foundation Studs for Plummer Block(42X550 mm with 125mm Thread Both side) with both side nut and locknuts (material EN-8)

Foundation Studs for Gearbox foundation Frame (50X670 mm with 110mm Thread) with Nuts , Locknuts and washer (material EN-19)

Foundation Studs for Column (50X1070 mm with 110mm Thread) with Nuts , Locknuts and washer (material EN-19)

Inhaul Coupling bolts along with Bush as per sample.

pin for Inhaul arm of material:EN-8

Repairing & Reconditioning of Eccentric shaft (Length=2530mm) of vibrating screen(TE-13, Size :7x16)

Fabrication of Suspension Bars Size (Length:2760mm, dia:54mm)

Repairing of tripper trolley wheel Assembly

Fabrication of unbalance weight of vibrofeeder motor

Repairing and reconditioning of damaged unbalance weight of vibrofeeder motor

Manufacturing of shock foot rest of Hydro motor of side arm charger

Fabrication of Catcher rod (72x2000 MM) for rod catcher arrangement

Fabrication of Square head bolt (30x370mm, head 45x45mm)

Fabrication of Vibro Feeder foundation Stud(20x450mm, threaded Length: 85mm) and Washer 02no.(thick=05mm).

Fabrication of Bolt (24x100mm. pitch=2.0mm), Material:HT Gr.10.9 : This includes making of Hexagonal head and cutting of thread of pitch; 02mm upto head on bar of dia.24mm of Material:HT Gr.10.9.

Fabrication of pin for rod eye of Hydraulic clamp of Wagon Tippler#3&4.

Fabrication of Bolt: 16 x175 mm with material; EN-8.

Repairing of Fusible plug

Fabrication of Jack Bolt (24x300mm) of Vibrating screen motor foundation.

Finishing of deformed Labyrinth seal of Plummer block (Bearing .22240CCK/W33)

Repairing of Pin –shaft (65x395mm) of vibrating screen motor foundation.

Repairing of sheave pulley of vibrating screen.

Fabrication of Eye bolt for pan spring of suspended vibro feeder.

Repairing & reconditioning of damaged Troughing roller using new shaft(L:560mm, Dia. 25 mm) etc.

Repairing & reconditioning of damaged Return roller using new shaft(L:1660mm, Dia. 25 mm) etc.

Fabrication of Bearing housing cover (OD; 325MM, Width; 65mm, thick; 15mm) of Tru flo Feeder TE-13(16’x7’) , Material CI.

Fabrication of Lever & Brass Bush (03 Nos., OD; 30MM, Thick ;20mm, ID; 20mm) of Scoop coupling , Material: CI, Arms Dimensions( L1:250mm, width:20mm,Thick:18mm, L2: 200MM, width:18,Thick:18mm).

Repairing of bearing portion of Tru flo Feeder TE-13. (16’x7’) Casing.

Fabrication of tight fit type Bolt (40x180mm. pitch=3.50mm, Material: HT Gr.10.9.) for WT#3&4 Sector Gears.

Fabrication of tight fit type Bolt (20x80mm. pitch=2.0mm), Material: HT Gr.10.9:

Repairing of Dust suppression Water Pump (cap. 38.3KW) by replacement of impeller and repairing of shaft.

Fabrication of manually adjustable frame of return roller.

Fabrication of return roller frame/bracket.

Repairing of Scoop controlled Fluid coupling Oil Pump.

Fabrication of Feeding tripper flange coupling of conv.8A&8B (Flange size: OD 160 mm, Thick 16mm, Hub Length :44MM, dia. 70mm, Total length 120mm, Internal bores:d1:28mm, d2:38mm), Each half having No. of holes:4 of dia. 32mmn , it includes fabrication of MS Bushes fit type in 04 No’s (ID:16mm ,Thick :16mm,OD: 32m) in each half i.e. Total no’s of bushes 08Nos in the coupling.

Fabrication of Resilient plate of Fluid Coupling (HFD9X, FCU16.25, FCU17.75 and T-12/08).

Fabrication of Screen plate of Crusher TE120/270 (Material: SAILMA-350HI, Thick: 40mm).

Repairing & Reconditioning of vibrating screen(TE-13, Size ;7x16) Gear

Repairing of Cage actuating Mechanism for Ring Granulator ( TR120/270)

Repairing & Reconditioning of Scoop coupling Rotor/Impellor Shaft (SC9/10/14 dias ;75 -100mm)

Repairing of tippler hydraulic pump pinion shaft

Repairing of Scoop coupling bearing housing

Fabrication of coupling Bolt (8x65mm. pitch=1.25mm, Material: EN8.) for Stacker- Reclaimer Travelling wheels.

Fabrication of Vibro Feeder foundation Stud(25x500mm, threaded Length: 85mm) and Washer 02no.(thick=08mm)

Repairing of Crusher Plummer block (Bearing 22240CCK/W33)

Repairing of Vibromotor bearing housing

Repairing of Gate valve (100/125/150mm)

Works of Items/spares against Wagon Tippler of CHP 2X110MW:

Inhaul Wheels Assembly along with replacement of bush.

Inhaul rope pulley.

Inhaul Gear box side Drum coupling.

Inhaul Motor Side coupling.

Inhaul arm wheels

Fabrication of tight fit type bolt (30x150mm. pitch=3.5 mm), Material: HT Gr.10.9:

Fabrication of tight fit type bolt (24x150mm. pitch=3.0mm), Material: HT Gr.10.9:

Fabrication of Lever Pin (Dia.80mm, Length 280mm) of WT#1&2.

Brake shoe liner for WT#1&2 (450x220x10mm)

Brake liner brass screw 8x50mm with nut

M K TRADERS