8567 PROVISION AND ADDN/ ALTN OF CERTAIN MINOR WORKS AND CERTAIN REVENUE WORKS UNDER AGE B/R-II AND AGE E/M UNDER GE (CENTRAL) PUNE

Amount

DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet M&L for 6 mm thick non aesbestos ceiling board for false ceiling of size 600 x600x mm on GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as directed and specified

Taking down Chowkhats or frames not exc. 1.5 sq. m each complete and making good disturbed portion of jambs with PCC 1:3:6 type C1 using 20mm graded aggregates, plastering, finish as required etc as directed

All as per item No 2 above but exc 1.5 and n.exc 4 Sqm each

S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F anodised powder coated aluminium door shutters (single / double leaf) or partitions, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges 3 Nos, anodised aluminium snap beading, screws etc. complete all as specified (Note :- Glass pane shall be measured and paid sepertely)

S&F powder coated aluminium window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/Mtr etc complete and inclusive of necessary hardware i.e. locking mechanism, handle and 4.8mm thick selcted quality glass for glazing and stainless steel wire cloth 0.71mm dia with width of aperture 1.18mm including necessary gasket / neoprene / rubber packing / beading etc all as specified and directed

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete

M&L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20mm thick screed bed of CM 1:6 complete.

M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick backing coat of CM 1:4 complete all as specified.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over 1mm thick wall care putty including complete removal of existing treatment of any layer on wall complete all as specified and directed.

M&L for preparing old plastered or unplastered surface of walls and applying one coat of cement based paint complete all as specified and directed.

S&F in repairs 15mm bore chromium plated bib cock fancy type. Make Jaquar cat part no:FLR-5047N or equivalent model in KOHLER and ROCA.

S&F in repairs 15mm bore chromium plated angle cock fancy type.Make Jaquar cat part no:FLR-5053N or equivalent model in KOHLER and ROCA.

S&F in repairs PVC connection 15 x 450mm.

S&F in repairs 15mm bore chromium plated pillar cock fancy type.Make Jaquar cat part no:FLR-5015 or equivalent model in KOHLER and ROCA.

M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade including taking up or down and connection including cleaning for refixing or removal to store all as specified.

M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade including taking up or down and connection including cleaning for refixing or removal to store all as specified.

Dismantling of water tank and removing to store capacity 1000 litres and S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed. Complete all as specified and directed.

S & F in repairs Gun-metal, globe or gate valves ISI marked, 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified. Make Jaquar cat part no:ALD-CHR-577 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs vitreous china pedestal pattern water closet white with including cast iron 'P' or 'S' trap, matching sheet cover and wall hung cistern with drainage pipe and connection to trap seat cover and . including making good to floor, complete all as specified. Make Jaquar cat part no: CNS-WHT-851 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets and 32mm dia 1mtr long PVC waste pipe. Make Jaquar cat part no: FLS-WHT-5701 or Techno commercial equivalent model in KOHLER and ROCA.

S&F 15mm bore chromium plated concealed cock fancy type, Make Jaquar cat part no: ALD-CHR-083FT & CON-CHR-069FTK or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls complete

All as per item No 29 but 75mm bore

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removal excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete

M&L for cement concrete type D2 1:4:8 (using 40mm graded aggregates) in foundation, filling and mass concrete complete

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia.

Ditto- as above items No 38 but 8 to 10mm dia as in stirrups complete

M&L for formwork to rough finished flat surfaces of footing and plinth beams and bases of columns complete

M&L for reinforced cement concrete M-25 (design mix) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete

M&L for formwork to rough finished flat surfaces of pillars, posts, struts, piers, columns and stanchions etc complete

M&L for reinforced cement concrete M-25 (design mix) for columns, pillars, piers, posts and struts etc complete

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded aggregate) for roof beams and lintels complete

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured)

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 complete all as specified and directed.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement

M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer of same make over external wall surfaces complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make over 2mm thick wall care putty complete all as specified and directed.

M&L for hard core of broken stone of gauge exe 63 mm deposited spread and leveled in layers not exe 15cm thick watered and rammed to a true surface.

M & L for PCC 100mm thick (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base for flooring over 100mm thick hard core (hard core will be measured and paid separetely).

M&L 75 mm of thick PCC (1:3:6) type C-2 as in plinth protection

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all specified.

S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed

Supply only 4.0mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

Supply only 9 mm thick prelaminated particle board interior gde prelaminated both side with decorative choice lamination fixed with screws as in aluminium partation & aluminium door shutter etc all as directed. Make : Duro/National/Archid Ply wood.

Supply only stainless steel wire 0.36mm nominal dia of wire cloth and average width of aperture 1.40mm and fixed to aluminium window / ventilator shutters / steel windows etc complete all as specified and directed

Supply only Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved nodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F factory made soIid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for tubes and bottom rails, MS frame shall be covered with heat moulded plain colour PVC, C channel having PVC sheet strip of 20 mm width struck in side with sovent cement of style and plain colour PVC sheet for top rail, lock rain and bottom rail on either side and as gap insert for top & bottom rail, panel; of plain colour PVC sheet to be fitted the MS frame welded/sealed to style and rail suitable PVC sheet, directed by Engineer-in-charge.

S&F in solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F in harrison rails (Curtain rod/drapery rod), 25mm dia, stainless steel with and including fency type stainless bracket / wall to wall 02 Nos of each opening and stainless steel side stopper fency type of required shape and size 2 Nos of each opening complete all as specified and directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe-290(Gde E-165)

M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over one coat of redoxide primer area Exc 10 cm width or girth

S&F 150 mm extruded aluminium alloy handles fabricated type.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed

S&F stainless steel butt hinges 100mm, complete all as specified.

S&F in repair brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete.Make Jaquar cat part no:OHS-1989 or equivalent model in KOHLER and ROCA.

S&F in repairs chromium plated soap dish approximate size 160x 160x9 complete all as specified and directed.Make Jaquar cat part no:AKP-CHR-35731P or Techno commercial equivalent model in KOHLER and ROCA.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F 110 mm PVC (SWR) bends with oval access door any radius

S&F 75mm PVC (SWR) bends with oval access door any radius

S&F sheet glass shelf assembly consisting of 5 mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part , I

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.Including dismantaling of old AC/galvanised Sheet.

M&L for MS structural steel work, framed as in trusses purlins, rafter, post etc conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed,

Supply and fixed 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed

Supply and fixed 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws as specified and directed

M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling on aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.50 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 2.0 mm dia GI wire or 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, and applying three coats of white wash.

M&L for reinforced cement concrete pipe 200 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.

M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 200 mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching, bed block for rungs, window cills etc complete all as specified and directed by Engr-in-charge

M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement (@ 150MM c/c both ways) complete

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 including use and waste of formwork complete

Taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces

Taking down of submain wiring of any type and size complete all as specified and directed

M&L for surface point wiring on wall/ ceiling with necessary fixing arranagements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic PVC conduit medium grade ISI marked not less than 20mm dia/ PVC casing & Caping not less then 25mm including all accessories/ fittings such as junction boxes, bends, tee, elbow etc alongwith required size boxes including frame/ cover plate suitable for mounting switches/ sockets etc including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5Sqmm, 1100 volts grade for continousearthing including cutting the chases and making good the surface by cement mortar and for matching/ finishing of new surfaces either by means pf plaster of peris/ Putti or distemper/ colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following :- Note : The quoted rate shall include circuit wiring of any length from DB to Switch box

One light point controlled by one switch complete all as specified and directed.

One fan point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.

One Exhaust fan point controlled by one 5 Amps one way modular switch complete all as specified and directed.

One 5/6 Amp socket controlled by one switch same board complete all as specified.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/ side the switch board of light point in same vertical/ horizintal plane.

One 3 pin 6/5 Amp socket outlet same board

All as per item no. 93 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified.

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked duly drawn through PVC conduit concealed in wall / floor/ceilingalong with suitable fittings and conduits of appropriate size as per specification as required at site and as directed of medium duty ISI marked including all accessories etc. with MS termination boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. ISI marked and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- (1) The quoted rate shall include cutting chasing in wall , and making good disturbed surfaces of walls, floors, etc will be done by contractor without any extra claims.(2) The rate shall deemed to be include the cuircuit wiring complete

(a) One light point controlled by one switch complete all as specified and directed.

(b) One fan/exhaust point controlled by one switch complete all as specified and directed.

(c) One 5/6 Amp socket controlled by one switch same board complete all as specified.

(d) One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

All as per item no. 95 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, IP 55/56 including suitable bracket complete with fitting all as specified and direcred.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete including cutting of wall if necessary to fit the fan as specified and directed

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed

S&F modular socket out let 5/ 6 Amps 3 pin incl connection complete all as specified and as directed

S&F of modular rotating step type electronic fan regulator, two module incl connection complete all as specified and as directed

S&F of modular socket twin type, 5 pin 6/16 Amps flush type incl connection complete all as specified and as directed

S&F modular switch type single pole one way 15/16 amps incl connection complete all as specified and as directed

S&F ceiling rose, surface, three terminals incl connection complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED tube lights 4 feet fitting 1x 20W, 220V, Ac aluminium housing body connecting up with flexible copper conductor cable of suitable size from ceilingrose complete.

Supply and fixing aluminium housing LED light fitting 2 feet, 10 watt 220 V AC including connecting up with flexible copper conductor cable of suitable size complete

S&F Sub main wiring with 2 runs of single core, 4 sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS quality) drawn through PVC casing capping 25mm (not less than) with fitting/accessories, fixed on roof, walls, ceiling etc including 4 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. Note : Rate includes (i) PVC casing capping and its accessories (ii) Two runs of cable and one run of earth wire of size 4 sqmm

All as per item No 108 but for 10 sqmm 3 runs drawn through PVC conduit of size not less than 32 mm dia medium grade. Note :- 3 runs of 10 sqmm wire and PVC conduit shall be measure one length.

S&F in repairs of MCB SPN DB 8 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door complete all as specified and as directed

S&F MCB SPN DB 12 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door complete all as specified and as directed

Supply and fix in repairs TPN DB vertical 6 way IP 54 with incoming provision for MCCB 125A 16 KA, Ics=100% ICU, adjustable thermal magnetic type as incomer and 3 Phase Outgoing, Double door, 415 V bus bar capacity 200A with MCBs/MCCBs complete Note: Rate of MCCB Shall be considered in the quoted rate

S&F of MCB TPN DB 4 way IP-43 powder painted with bus bar 200A, neutral link, earth bar and Din rail ,230 Volts with double door and making the surface good to match with adjucent complete all as specified and as directed

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete.

Supply and fixing amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

SP 5 To 32 AMP

SPN 40 to 63 AMP

Supply and fixing 415V 63A 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete

Supply and fix metal clad enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A C series 10 KA complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods as per site requirement upto 6 feet rod,clamps fixing to iron channel, remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down of old U/s fan and deposit to MES store yard

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of LT UG cable/poles etc in soft/loose soil and getting out complete all as specified.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point for any type of excavation.

M&L for laying of CABLE COVER 100MM dia 2 Nos half round (for bottom and top) and before laying excavation of area shall be levelled all as specified and directed.

M & L for Cutting of road/hard standing and making good with PCC (1:2:4) using 20mm graded stone aggregate complete all as specified.

Supply and laying 40 mm GI pipe light grade with and incl all fittings such as bends, elbows, tees short pieces, union etc in trenches or fixing on wall complete all as specified and directed.

Supply and fix MCCB 4P 125A 16 KA Ics=100%Icu adjustable thermal magnetic release type complete all as specified and directed

Supply, laying, testing, commissioning of cable XLPE insulated armoured heavy duty electric cable including end termination with necessary cable glands, lugs etc in trenches/ poles/ walls through pipes etc, ISI Marked (1100V grade) with multistranded aluminiuim conductor, cross sectional area 70 Sqmm 3.5 Core complete all as specified and as directed.

Supply, laying /fixing on wall and testing cable XLPE Insulated , galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core

M&L for light grade galvanized pipe ISI marked with all fitting, laid in trenches, under road or fixing on wall/pole/ crossing nallah and fitting of light fitting etc of bore 50 mm complete all as specified and as directed.

M & L for laying of 50 mm outer dia, double walled corrugated (DWC) HDPE duct pipe with antirodent and non flame propagating properties of approved colour complete with fittings for cable protection complete all as specified and directed.

Supply, installation, testing and commissioning Outdoor type CPRI Approved LT panel board factory fabrication totally enclosed, double door, made out of 3.15 mm thick CRCA sheet metal of suitable size with MS angle iron frame made out of 50x50x6 mm, hinged panel board opening handles, locking arrangements, fully compartments used cut to size rivetted, welded, bent to shape and cubical fabricated truly to box type, dust proof and vermin proof, provide sufficient circular holes at the bottom sheet for entry of plated cable glands and aluminium lugs suitable for incoming and outgoing cables, provide PVC rubber bushes to spare holes, chromium incoming and outgoing provide aluminium bus bar using aluminium strips of adequate size extendable at both ends for current carrying capacity as in given below with back up kit kat fuse protection rating giving below for phases and ball capacity for neutral entire cubical treated with primer and duly epoxy powder coated internally as well as externally, 3phase, 4 wire, 500 volts, 50 cycles system, including grouting panel legs in PCC 1:2:4 type B-1, complete with danger notice board with and including the following controls and accesories:-

OUT GOING (i) MCCB 4 Pole 63 Amps, Rotary Handle, adjustable Thermal Magnetic relay with breaking capacity 16 KA at 415 volts ics=100% Icu - 01 No. (ii) MCCB 4 Po!e. 40 Amps;Rotary Handle, Adjustable Thermal Magnetic relay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 01 No. (iii) Auto control time switch, timer control for different 24 hours adjustable type including power contractor of capacity 40 amps complete - 01 No. (iv) MCB TP 25/32 Amps with breaking capacity 10 KA at 415 volts - 02 Nos. (v) MCB SP 6-32 Amps with breaking capacity 10 KA at 230 Volts - 02 Nos. (vi) DOL starter upto 7.5 HP Motor 415V 3 Phase 50 Hz AC Supply with overload relay, under voltage relay, single phase preventer, push button for ON/OFF- 01 Nos (vii) Switch socket combination multipurpose 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete - 02 Nos (viii) Indicator Lamps (LED type) & bakelite fuse showing R,Y, B phase - 02 set.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR Part -I 2009 connected to earting test point all as specified complete with excavation & earth work, PCC pit with 50mm thick RCC cover (grade M-15) having suitable handle (10mm MS Rod) 20mm dia GI pipe medium grade ISI marked watering pipe with GI funned with wire mesh 40mm bore GI pipe for protection of earth lead conductor all as specified and as directed and testing on completion.

Suuply and fix electric water heater, storage type steel body with heating element 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, GI flexible connection piece (for cold and hot water supply) etc including drilling, fastening and fixing to wall at proper location with necessary suitable fittings such nuts and bolts and making good to the disturbed surfaces complete all as specified and directed. Note : The quoted rate include connecting PRCD plug to geyser complete all as specified and directed.

S&F 15mm galvanised iron medium grade including all necessary fittings, tapping, threading (if any) connecting from existing pipe/ tank to upto geyser and making good to the disturbed surfaces complete all as specified and directed.

S&F stop cock 15mm, fancy type chromium plated compact for geyser pipe connection complete all as specified and directed.

S&F bib tap fancy type 15mm chromium plated complete all as specified and directed

S&F modular switch 16A 1way complete all as specified and directed

S&F modular socket 6A/16A -2/3 pin combined 2 module complete all as specified and directed Note :- the quoted rate shall include 3 module PVC box with modular plate and cover

Supply and fix desert cooler of capacity 115 Ltrs, high efficiency honecomb pad, auto louver movement, cool flow dispenser for better cooling. Model : SUMO 115XL of Symphony or equivalent

Supply and fix desert cooler of capacity 80 Ltrs, high efficiency honecomb pad, auto louver movement, cool flow dispenser for better cooling consume 190 watt only, Model winter 80 XL of symphony or equivalent

Supply & lay 20 mm dia GI pipe medium grade including all fittings fixed walls/ceiling or laid in floors/trench complete all as directed

Supply and fix gun metal gate valve of size 20mm dia

Cutting of exisitng pipe 20/25mm dia and coneecting the 20mm pipe line complete all as specified and directed

Suuply and fixing switch, single pole, one way 5 AMP 230 Volts ISI Mark complete all as specified and directed

S&F as replacement socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and directed.

DURGA CONSTRUCTION & TRANSPORT (BID ID -3290931)

M/S NAVNEET S MORDE (BID ID -3293822)

M/s Asrani and sons (BID ID -3294068)