SE/BII_Covid-19_Mortuary_Sex Crime Complex_GMCH

Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With medium setting bitumen emulsion On W.B.M / W.M.M. @ 0.4kg/sqm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm

Providing and fixing bright finished brass handles with screws etc. complete: 100 mm

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (b) Sona (i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801)

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

Bend 87.5° 110 mm bend

75 mm bend

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore Vertical

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal dia Pipes

20 mm nominal dia Pipes

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch Each 45

15/16 A switch Each 110

3 pin 5/6 A socket outlet Each 58

6 pin 15/16 A socket outlet Each 128

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

6 way (4 + 18), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door

Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted single door surface mounting vertical TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar up to 125A and din rail etc. fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (L&T or equivalent make) 6 way VTPN double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole Each 199

Triple pole and neutral

Supplying fitting fixing of following DP 240V 'C' Series 10KA MCB in the existing DB/Panel as specified and directed by the department (Havells or equivalemt make) 40A DP 240V 'C' Series 10KA MCB

Supplying fitting fixing of following 4P 240-440V 'C' Series 10KA MCB in the existing DB/Panel as specified and directed by the department (Havells or equivalent make) 63A 4P 240-440V 'C' Series 10KA MCB

Supplying with fitting fixing of surface wall mounted LED luminaries complete with all accessories including iconnection with 1.5 sq.mm PVC insulated copper conductor as required and as directed by the department. (Crompton/PHILLIPS/BAJAJ/Havells or equivalent considering the mother items rate and specification) a) 20W 4ft LED Batten

10W 2' LED Batten

Supplying including fitting fixing of following A.C. Ceiling fan (ISI Marked) complete with all accessories like down rod, conopy etc. of following sweeps with making necessary connection as approved by the deptt) as required complete and as directed by the department (Without regulator) (USHA or equivalent make) 1200mm sweep

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the deptt) as required complete and as directed by the department (USHA or equivalent make) 230mm Sweep Metal Blade

450mm Sweep Metal Blade 1400 rpm

Supplying including fitting fixing of following A.C. wall fan in the wall of following sweeps with making necessary connection as approved by the deptt) as required complete and as directed by the department (USHA or equivalent make) 400mm Sweep

Supplying, installation, testing & commissioning of Hi-Wall INVERTER 3 STAR rating non ducted copper condencing unit split type Air Conditioner of the following capacity with cordless remote complete with copper pipe and electrical connection cable, as approved by the deptt) . Up to 3m between the room unit and out door unit as directed by the department. 1.5 Ton a) 1.5 Ton 3 Star (Voltas or equivalent nmake)

Providing Copper pipe including control cable fitting for Split/Cassetter AC as per required size including Nitrile Insulation complete For 1 Ton to 1.5 Ton Capacity

Supplying with fitting and fixing of ready made powder coated MS frame for Split AC Outdoor I=Unit Installation including anchor fastnuts complete for split ac upto 2 Ton capacity a) for 1.0 Ton to 2.0 Ton Outdoor unit

Supplying with fitting and fixing Voltage Stabilizer of the following specification complete includinf making necessary connection Makes: at list 3 nos 4.0KVA Automatic Input 120-280 V Out put 200-240V

Supplying including installation, commissioning of vermin and dust proof totally enclosed, phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.350M (B)X 1.2M (H) X 0.40M (D) made of 16SWG (1.66mm) thick C.R. sheet and 35mm x 35mm x 5mm size angle having 4 nos. legs at the bottom. The panel board is to be erected in 1:3 : 6 PCC foundation including brick soiling/grouting etc. complete neatly wiring done with provision for one no 250A 4 pole 415V MCCB or switch Fuse Unit as in corner and provision for 8 nos. 4PMCB out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical item: 1. 20mm x 5mm 4 strip copper Bus-Bar 0.6M length each 2. Digital 3 Phase Multifunction meter Accuracy class 0.5-1 no. 3. Poilt Lamp with integral ckt LED 110-230 V (Red, Yellow & Blue)- 3 nos. 4. 0.5 A-5A SP MCB-3 nos. (Incoming & Outgoing Switch Gear or reqd rating will be measured and paid separately)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A,30KA,FPMCCB

125 A,36KA,FPMCCB

250 A,36KA,FPMCCB

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Supply of following size PVC/XLPE insulated and PVC sheathed 1.1KV G soild Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulate, cores laid up PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance aluminium strip, Galvanised for cables up to 2 x 10 sqmm, 3 x 10 sqmm , 4 x 6 sqmm balance all gavanised steel strip) extruded PVC Type ST2 sheathed 650/1100V grade as per IS 7908 Part-I) 1988 armoured U.G. Cable U.G. cable laid in ground/partially in air ( as required for termination over ground including excavation of cable trench up to depth of 75cm , refilling , protective brick convering, Sand cushioning etc. complete handling of surplus spoil debries etc. to proper place as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolex makke) 3 & 1/2 Core A2XFY 50.00 Sq.mm 3 & 1/2 Core armoured U.G. cable

Supplying including installation, connection cable, as approved by the deptt. with 2 x 2.5 sq.mm copper FR CABLE, testing and commissiong of the following Street light of IP 66 i=on existing Pole/Structure including lamp, driver as required complete as directed and specified by the deptt. (Wipro or equivalent) 70W IP66 LED Street Light fitting

Supplying and errection of G.I. Octagonal of following length as per following specification : Conforming to grade S355JO Conforming S355JO , Base Plate Fe410 Conforming to IS 226/IS2062, Foundation Bolts:-6.8Gr. As per IS 1367, Pole Sections :-Octagonal Poles shall be in single piece with single longitudinal welding join, Smart pack Junction box with 6 MCB & Terminals for mounting inside base compartment of pole Top Dia (A/70mm Bottom Dia. (A/130mm, Sheet Thickness 3mm, Base Plate dimensionsL x B x 220 x 220x 12, Foundation Bolt, Bolt Sizeno. x dia) 4 x 20 Dia, Pitch Circle Dia. (PC 205 Bolt Length 750, Projected Bolt Length 100mm , Anchor Plate thickness :-4 mm, Pole Foundation (Measured separately):- The octagonal pole shall be bolted on a pre cast foundation with a set of four foundation bolts for greater rigidity. Foundation:- The foundation shall be done with (Earth work:-2.04 cubic Meters. RCC :-1:1.5:3 proportion 0.65 cubic meters Steel :-22.43 Kg. Shuttering :-4.32 square metres: 22.43 kg. (Foundation work measured separately) a) 6.0 Mtr Hight Galvanised Octagonal Pole

Supplying including fitting and fixing of HOT Dip galvanised arm bracket for installation of luminaries. Header with top cap 300mm ling pipe of thickness 3 with arrangement to fix on pole top with 3 Nos. of bolts. (i) Armed of required leength size 48.3 mm out side dia x 3.25mm thick (Bajaj/Phillips/Valmont/Paruthi Engr/Nezone Make) Stiffener Plate from arm of the following types:- (a) Single arm bracket 1000mm long for 3m to 10 Metre Poles

b) Double arm bracket 1000mm long for 3m to 10 metre Poles

Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type floor mounting compartmentalize panel board of size 0.80M (B) X 0.90M (H) x 0.40 M (D) made of 16SWG (1.66mm) thick C.R. sheet and 35mm X 35mm x 5 mm size angle having 4 nos. legs at the bottom complete neatly wiring done with provision for one no 40A 4 pole MCCB as incommer and out going as specified and directed by the deptt. (confiming to IP43 protection comprising of the following electrical items 1) 40Amp 4 pole 415 Volt 50Hz MCCB incorner-1 2) 32 A DP MCB -3 Nos. 3) 25 mm x 5 mm size 4 stripn copperBus Bar-2 set 4) 40Amp 4 pole ON-OFF poser contactor -1 No. 5) 20 Amp 2 Pole ON-OFF poser contactor -2 No. 6) Surface mounting Astronomical timer switch -1 No. 7) Surface mounting Analong timer switch -0 No. 8) 63Amp backlite HBC fuse kit-kat- 3 nOs. (Incoming & Outgoing Switch Gear of reqd. rating with foundation work will be measured and paid separetely)

Supply of following size PVC/XLPE insulated and PVC sheathed 1.1KV G soild Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulate, cores laid up PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance aluminium strip, Galvanised for cables up to 2 x 10 sqmm, 3 x 10 sqmm , 4 x 6 sqmm balance all gavanised steel strip) extruded PVC Type ST2 sheathed 650/1100V grade as per IS 7908 Part-I) 1988 armoured U.G. Cable as specified and directed by the deptt. (Havells or equivalent make) 16.00Sqmm 4 core

10.00Sqmm 4 core

6.00Sqmm 4 core

4.00Sqmm 4 core

Supplying with installation & commissioning of readymade maintenance free CPRI approved chemical earthing system with 100MM dia 2.75Metres length corrossion free cemntrifugally Cast Iron Earthing Electrode complete with Reslow /BFC Grounding chemical compouned (40KG) and Advance Earth Pit cover (CI) of size 300mm x 300mm including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt. 100mm dia Chemical Earthing

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying & Installation, Repairing, Fitting & Fixing of below mentioned items:- Repairing of Morgue (Total 12 body capacity - 6 body two units) Refilling of Gas Chambers

Display of Monitoring

Condenser

Colling Coil

Capacitor

Filter

Capillary

Fan Motor

Gas Filling

Transformer

All Internal electrical wiring

Stabilizers

Insulators

Doors

Compressor

Service Charge

Transportation

PRADIP DEWAN